Search

In order to establish an effective mechanism for predicting spoilage of chilled goose breast meat, the microfloral succession was investigated by high-throughput sequencing and the dominant spoilage bacteria of chilled goose breast meat were determined. Meanwhile, the effects of three dominant spoilage bacteria on the volatile flavor substances of chilled goose breast meat were characterized by using gas chromatography-ion mobility spectrometry (GC-IMS) and solid phase microextraction-gas chromatography-mass spectrometry (SPME-GC-MS). The results showed that the diversity of microflora was richer during the early and late storage periods. The dominant phylum was Amoeba, and the dominant spoilage bacterium was Pseudomona. Pseudomona began to grow significantly starting from day 3 and reached a peak with a relative abundance of 96.79% on day 9. Contamination with the dominant spoilage bacteria significantly affected the composition of volatile components in goose breast at the end of storage, resulting in higher proportions and contents of esters and ketones than fresh goose breast. Orthogonal partial least squares discrimination analysis (OPLS-DA) showed that methyl palmitoleate, methyl palmitate, ethyl oleate, methyl linoleate, ethyl linoleate, ethyl palmitoleate, 3-hydroxy-2-butanone, methyl trans-oleate, ethyl trans-oleate and neopentyl hexanoate were the major contributors to the volatile flavor of spoiled goose breast.

The traditional hulling of Camellia oleifera fruit is mainly manual, with high work intensity, high labor cost and low production efficiency. Mechanized hulling is the inevitable trend of modernization of Camellia oleifera industry. The existing hulling device of Camellia oleifera fruit has poor universality, low hulling rate and high seed kernel breakage rate, which affects the popularization of mechanized hulling technology of Camellia oleifera. By comparing the existing hulling methods of Camellia oleifera, the structure and working principle of each hulling device were analyzed, their advantages and disadvantages were summarized, and their development direction was prospected.

Regarding the difficulty of extracting the acquired fault signal features of bearings from a strong background noise vibration signal, coupled with the fact that one-dimensional (1D) signals provide limited fault information, an optimal time frequency fusion symmetric dot pattern (SDP) bearing fault feature enhancement and diagnosis method is proposed. Firstly, the vibration signals are transformed into two-dimensional (2D) features by the time frequency fusion algorithm SDP, which can multi-scale analyze the fluctuations of signals at minor scales, as well as enhance bearing fault features. Secondly, the bat algorithm is employed to optimize the SDP parameters adaptively. It can effectively improve the distinctions between various types of faults. Finally, the fault diagnosis model can be constructed by a deep convolutional neural network (DCNN). To validate the effectiveness of the proposed method, Case Western Reserve University's (CWRU) bearing fault dataset and bearing fault dataset laboratory experimental platform were used. The experimental results illustrate that the fault diagnosis accuracy of the proposed method is 100%, which proves the feasibility and effectiveness of the proposed method. By comparing with other 2D transformer methods, the experimental results illustrate that the proposed method achieves the highest accuracy in bearing fault diagnosis. It validated the superiority of the proposed methodology. [ABSTRACT FROM AUTHOR]

In view of the frequent failures occurring in rolling bearings, the strong background noise present in signals, weak features, and difficulties associated with extracting fault characteristics, a method of enhancing and diagnosing rolling bearing faults based on coarse-grained lattice features (CGLFs) is proposed. First, the vibrational signals of bearings are subjected to adaptive filtering to eliminate background noise. Second, frequency-domain transformation is performed, and a coarse-grained approach is used to continuously segment the spectrum. Within each segment, amplitude-enhancement operations are executed, transforming the data into a CGLF graph that enhances fault characteristics. This graph is then fed into a Swin Transformer-based pattern-recognition network. Third and finally, a high-precision fault diagnosis model is constructed using fully connected layers and Softmax, enabling the diagnosis of bearing faults. The fault recognition accuracy reaches 98.30% and 98.50% with public datasets and laboratory data, respectively, thereby validating the feasibility and effectiveness of the proposed method. This research offers an efficient and feasible fault diagnosis approach for rolling bearings. [ABSTRACT FROM AUTHOR]

In this paper, a 2D off-grid small compact model of vertical axis wind turbine was established. The sliding grid technology, the RNG turbulence model and the Coupld algorithm was applied to simulate the unsteady value of the model's aerodynamic performance. Through the analysis on the flow field at difference moments, the rules about velocity fields, vortices distributions and the wind turbine's total torque were obtained. The results show that: the speed around wind turbine blades have obvious gradient, and the velocity distribution at different times show large differences in the computional domain. In the rotating domain vorticity is large. With away from the rotation domain, vorticity reduced quickly. In the process of rotating for vertical axis wind turbine, the wind turbine's total torque showed alternating positive and negative changes.

Reservoir computing is a brain heuristic computing paradigm that can complete training at a high speed. The learning performance of a reservoir computing system relies on its nonlinearity and short-term memory ability. As physical implementation, spintronic reservoir computing has attracted considerable attention because of its low power consumption and small size. However, few studies have focused on developing the short-term memory ability of the material itself in spintronics reservoir computing. Among various magnetic materials, spin glass is known to exhibit slow magnetic relaxation that has the potential to offer the short-term memory capability. In this research, we have quantitatively investigated the short-term memory capability of spin cluster glass based on the prevalent benchmark. The results reveal that the magnetization relaxation of Co, Si-substituted Lu3Fe5O12 with spin glass behavior can provide higher short-term memory capacity than ferrimagnetic material without substitution. Therefore, materials with spin glass behavior can be considered as potential candidates for constructing next-generation spintronic reservoir computing with better performance. [ABSTRACT FROM AUTHOR]

Due to the recent rapid growth of ocean oil development and transportation, the offshore oil spill risk accident probability has increased unevenly. The marine oil spill poses a great threat to the development of coastal cities. Therefore, effective and reliable technologies must be used to monitor oil spills to minimize disaster losses. Based on YOLO deep learning network, an automatic oil spill detection method was proposed. The experimental data preprocessing operations include noise reduction, gray adjustment, and local contrast enhancement. Then, real and synthetically generated marine radar oil spill images were used to make slice samples for training the model in the YOLOv5 network. The detection model can identify the effective oil spill monitoring region. Finally, an adaptive threshold was applied to extract the oil slicks in the effective oil spill monitoring regions. The YOLOv5 detection model generated had the advantage of high efficiency compared with existing methods. The offshore oil spill detection method proposed can support real-time and effective data for routine patrol inspection and accident emergency response. [ABSTRACT FROM AUTHOR]

Adipose-derived stem cells (ADSCs) are employed as a promising alternative in treating cartilage injury. Regulating the inflammatory "fingerprint" of ADSCs to improve their anti-inflammatory properties could enhance therapy efficiency. Herein, a novel injectable decorin/gellan gum hydrogel combined with ADSCs encapsulation for arthritis cartilage treatment is proposed. Decorin/gellan gum hydrogel was prepared according to the previous manufacturing protocol. The liquid-solid form transition of gellan gum hydrogel is perfectly suitable for intra-articular injection. Decorin-enriched matrix showing an immunomodulatory ability to enhance ADSCs anti-inflammatory phenotype under inflammation microenvironment by regulating autophagy signaling. This decorin/gellan gum/ADSCs hydrogel efficiently reverses interleukin-1ß-induced cellular injury in chondrocytes. Through a mono-iodoacetate-induced arthritis mice model, the synergistic therapeutic effect of this ADSCs-loaded hydrogel, including inflammation attenuation and cartilage protection, is demonstrated. These results make the decorin/gellan gum hydrogel laden with ADSCs an ideal candidate for treating inflammatory joint disorders. [ABSTRACT FROM AUTHOR]

As one of the most popular multiple criteria decision‐making (MCDM) methods, the stochastic multicriteria acceptability analysis (SMAA) is powerful in dealing with the uncertain preference information of decision makers. However, how to find compromise solutions for MCDM problems remains an open question in the SMAA family. A compromise solution refers to an alternative that is the closest to the ideal solution. In this paper, we propose an improved SMAA method, called the SMAA with compromise solutions (SMAA‐CO), to determine compromise solutions for MCDM problems with the uncertain preferences of decision makers and conflicting criteria. The SMAA‐CO uses nonmonotonic additive value functions to depict decision makers' ideal values for reference points. We apply the proposed method to capture multiple decision makers' uncertain preference information. An illustrative example concerning supplier selection in the pulp and paper industry is used to show the applicability of the proposed method. Some managerial insights are given. [ABSTRACT FROM AUTHOR]

Magnonics, an emerging research field that uses the quanta of spin waves as data carriers, has a potential to dominate the post-CMOS era owing to its intrinsic property of ultra-low power operation. Spin waves can be manipulated by a wide range of parameters; thus, they are suitable for sensing applications in a wide range of physical fields. In this study, we designed a highly sensitive, simple structure, and ultra-low power magnetic sensor using a simple CoFeB/Y3Fe5O12 bilayer structure. We demonstrated that the CoFeB/Y3Fe5O12 bilayer structure can create a sharp rejection band in its spin-wave transmission spectra. The lowest point of this strong rejection band allows the detection of a small frequency shift owing to the external magnetic field variation. Experimental observations revealed that such a bilayer magnetic sensor exhibits 20 MHz frequency shifts upon the application of an external magnetic field of 0.5 mT. Considering the lowest full width half maximum, which is about 2 MHz, a sensitivity of 10–2 mT order can be experimentally achieved. Furthermore, the higher sensitivity in the order of 10–6 T (µT) has been demonstrated using the sharp edge of the rejection band of the CoFeB/Y3Fe5O12 bilayer device. A Y-shaped spin waves interference device with two input arms consisting of CoFeB/Y3Fe5O12 and Y3Fe5O12 has been theoretically investigated. We proposed that such a structure can demonstrate a magnetic sensitivity in the range of 10 - 9 T (nT) at room temperature. The sensitivity of the sensor can be further enhanced by tuning the width of the CoFeB metal stripe. [ABSTRACT FROM AUTHOR]

Machinery fault diagnosis is an attractive but challenging task, especially for low-speed conditions. Therefore, a new discriminative approach that introduces robust principal component analysis (RPCA) and multikernel to deep neural networks is proposed to perform intelligent fault diagnosis. First, RPCA is applied to extract fault signals from extreme background noise based on its sensitivity to grossly corrupted data. Second, two cascaded multikernel principal component analysis stages with additional robustness to distortions in feature extraction are used to enhance the energy of spectrum symptom and overcome the tricky issues of low-speed machinery. Especially, the multikernel is introduced into the basic PCA filters to learn the data-adapting convolution filter and gain additional robustness to nonlinearity in the signal. Finally, the proposed method is demonstrated on signals from laboratory tests (with a slightly damaged defect in a bearing) and structural fault data, outperforming those of traditional machine learning and classical deep learning methods. Moreover, hidden information of the network is visualized to analyze the reasons for its high performance. [ABSTRACT FROM AUTHOR]

Raw vibration signals poorly perform in industrial bearing fault diagnosis because impulse features are damped and masked by disturbances and noises. Fault diagnosis is more challenging due to weak features. This work presents a signal filtering and fault characteristic enhancement method based on reconstruction adaptive determinate stationary subspace filtering (Rad-SSF) and enhanced third-order spectrum to address the above problems. In particular, Rad-SSF reconstructs an adaptive self-determined, decomposed vibration signal trajectory matrix to obtain non-stationary signals. Then, the filtered signal with the best fault characteristics is extracted according to kurtosis. A 1.5-dimensional third-order energy spectrum is performed to enhance the fault characteristics by strengthening the fundamental frequency and eliminating non-coupling harmonics. Finally, the dominant frequency in the spectrum is contrasted to recognize fault diagnosis, referring to theoretical fault characteristic frequency. The feasibility and effectiveness of the proposed method are demonstrated by simulation and engineering signals under different conditions. [ABSTRACT FROM AUTHOR]

Gain‐dissipative Ising machines (GIMs) are a type of quantum analog equipment that can rapidly determine the optimal solution for combinatorial optimization problems. When the noise intensity is significantly lower than the fixed point of the system, the performance of a GIM is not influenced by the fluctuation of the noise intensity. However, the noise in this study is limited to Gaussian white noise. The influence of prevalent colored noise on GIMs has not been researched. In this study, the influence of common‐colored noise on the performance of GIMs is numerically investigated. The results of a domain clustering dynamics analysis reveal that red noise can better suppress the generation of the noise‐induced irregular temporary domain. Furthermore, several prevalent MAXCUT problem topologies, including the Moebius ladder, random Moebius ladder, and 2D random lattice, are adopted as test benchmarks. The results reveal that GIMs influenced by white, blue, and violet noise perform better at low‐intensity noise condition. In contrast, pink and red noise‐injected GIMs demonstrate higher performances when applied to MAXCUT topologies with both ferromagnetic and antiferromagnetic connections under larger noise intensity conditions. This indicates that the noise dispersion can be used as an additional hyperparameter to optimize the performance of GIMs. [ABSTRACT FROM AUTHOR]

Polyethylene glycol (PEG) is a well-known water retention agent in biomedical products, the hydration efficiency of which is affected by its molecular weight. Using a broadband dielectric spectroscopy (100 MHz–18 THz), the hydration state of PEG aqueous solutions with various molecular weights was quantitatively evaluated. As the molecular weight increases, the restriction strength of hydration water increases in potency, while the number of hydration water molecules decreases. Owing to the opposite changes in hydration number and restriction strength, the measured collective hydrogen bond (HB) strength shows negligible molecular weight dependence. PEG with larger Mw produces a more heterogenous HB network. The internal folding and twining caused by the growth of the PEG chain obstruct the proper exposure of hydrophilic part of the monomer producing less hydration waters. The evaluation result supports an application of PEGs with low molecular weight in contact lens package solutions. [ABSTRACT FROM AUTHOR]

Circular RNAs (circRNAs) are closed back‐splicing products of precursor mRNA in eukaryotes. Compared with linear mRNAs, circRNAs have a special structure and stable expression. A large number of studies have provided different regulatory mechanisms of circRNAs in tumors. Challenges exist in understanding the control of circRNAs because of their sequence overlap with linear mRNA. Here, we survey the most recent progress regarding the regulation of circRNA biogenesis by RNA‐binding proteins, one of the vital functional proteins. Furthermore, substantial circRNAs exert compelling biological roles by acting as protein sponges, by being translated themselves or regulating posttranslational modifications of proteins. This review will help further explore more types of functional proteins that interact with circRNA in cancer and reveal other unknown mechanisms of circRNA regulation. [ABSTRACT FROM AUTHOR]

Low-speed bearing fault signal is weak and overwhelmed by background noise, and it is ineffective in diagnosing bearing faults. In this study, an improved statistical filtering and convolution neural network (CNN) low-speed bearing fault diagnosis method is presented. Statistical filtering is a convenient and effective signal-filtering method that can extract fault signals from strong background noise original signals. The improved method can deal with drawbacks in selecting the standard distinction index of statistical filtering algorithm. CNN is used to extract signal features automatically and build the diagnosis model for fault classification. An engineering experiment is performed with different condition-bearing fault signals to test this presented method, and the results show that the improved statistical filter and CNN are effective in diagnosing low-speed bearing signals. Comparison with traditional methods proves that this study has superior performance in low-speed bearing fault diagnosis. [ABSTRACT FROM AUTHOR]

A method of magnetocardiography (MCG) measurement using an overdamped bistable model based stochastic resonance (SR) technique for advancing biomagnetic sensors is proposed. To determine the system parameters for SR, an evolutionary algorithm combined with the coherent detection (CD) method is applied. We acquire and process an animal MCG at room temperature, detected by a commercially available optically pumped magnetometer. A comparison with a lowpass filter and the traditional CD method verified the ability of the proposed method to obtain a higher signal-to-noise ratio and peak value of the MCG, whilst retaining sufficient dynamic information. [ABSTRACT FROM AUTHOR]

Determining the embedded dimension of a singular value decomposition Hankel matrix and selecting the singular values representing the intrinsic information of fault features are challenging tasks. Given these issues, this work presents a singular value decomposition-based automatic fault feature extraction method that uses the probability-frequency density information criterion (PFDIC) and dual beetle antennae search (DBAS). DBAS employs embedded dimension and singular values as dynamic variables and PFDIC as a two-stage objective to optimize the best parameters. The optimization results work for singular value decomposition for bearing fault feature extraction. The extracted fault signals combined with envelope demodulation can efficiently diagnose bearing faults. The superiority and applicability of the proposed method are validated by simulation signals, engineering signals, and comparison experiments. Results demonstrate that the proposed method can sufficiently extract fault features and accurately diagnose faults. [ABSTRACT FROM AUTHOR]

Bearing fault impulses are easily submerged by background noise, resulting in the inconspicuous fault feature and affecting the accuracy of the fault diagnosis. This paper presents a novel method for bearing the fault feature enhancement and diagnosis based on the statistical filtering and the 1.5-dimensional symmetric difference analytic energy operator (1.5D-SDAEO) to solve the problem. 1). The statistical filtering is used to filter the background noise under the standard distinction index. 2). The 1.5D-SDAEO is used to enhance the signal impulse, suppress the residual noise, and improve the SNR. 3). The dominant frequency in the energy spectrum is compared with the rolling bearing fault characteristic frequency to the fault diagnosis. The feasibility and the superiority of the presented method are verified by the simulation, engineering, and comparison experiments. All results show that the presented method can effectively enhance the fault feature and accurately diagnose the rolling bearing fault. [ABSTRACT FROM AUTHOR]

Colorectal cancer (CRC) is one of the most common cancers worldwide. Recent studies have shown that long non-coding RNAs (lncRNAs) are involved in tumorigenesis and the development of CRC. By constructing a differential lncRNA expression profile, we screened gene chips and found that DNAJC3-AS1 was highly expressed in CRC tissues and was associated with poor prognosis in patients with CRC. Further, we proved through assays such as wound healing, colony formation, and Cell Counting Kit-8 (CCK8) that interfering with DNAJC3-AS1 could reduce the proliferation, migration, and invasion of CRC cells. Mechanically, we found that DNAJC3-AS1 regulates fatty acid synthase to promote the progression of CRC via the epidermal growth factor receptor/phosphatidylinositol 3-kinase/protein kinase B/nuclear factor κB signaling pathway. Therefore, DNAJC3-AS1 may be a new target for the diagnosis and therapy of CRC. [ABSTRACT FROM AUTHOR]

A novel method of intelligent diagnosis is proposed for structural faults in low-speed rotating machinery. It uses a hybrid scheme to automatically identify health states in a complex mechanical system by combining an improved mode decomposition approach, a Gramian angular summation field, and a convolutional neural network. The proposed method is tested with a data set affected by noise to evaluate its performance and generalizability that are both essential in fault diagnosis. Experimental results show that the proposed scheme is superior to traditional machine learning methods. It not only provides a more efficient and widely applicable way to learn intrinsic fault signatures, but it also has enhanced feature learning capability to improve precision and generalizability. Finally, the reasons for the method’s high performance are analyzed to determine the best general features for an adaptive classifier that is generalizable to diverse operating conditions. [ABSTRACT FROM AUTHOR]