Search

Solar-to-hydrogen energy conversion is a promising strategy to solve environmental pollution and energy crisis by utilizing photocatalytic water splitting. In this work, a "sandwich" structure of g-C3N4-based single-atom platinum (Pt) catalyst for photocatalytic water splitting is proposed and investigated using a combined first principles and semi-empirical study method. The calculation results indicate that, without any co-catalyst, the photogenerated holes in the valence band of BL-g-C3N4 cannot oxidize H2O to O2, and its oxygen evolution reaction (OER) performance is not better than that of the pristine monolayer g-C3N4. Significantly, the photogenerated holes in the valence band of the "sandwich"-structured photocatalyst g-C3N4–Pt1–g-C3N4 can oxidize H2O to O2 without any co-catalyst. That is, the OER performance of g-C3N4–Pt1–g-C3N4 is better than that of the pristine g-C3N4 and the pristine bilayer-g-C3N4 (BL-g-C3N4). However, it can be found that the introduction of single Pt atom confinement in the BL-g-C3N4 cannot effectively reduce hydrogen evolution reaction (HER) energy barrier or improve the hydrogen evolution kinetics of BL-g-C3N4. In other words, the introduction of the confined single Pt atom in the BL-g-C3N4 not only fails to improve HER performance of BL-g-C3N4, but deteriorates HER catalytic performance of BL-g-C3N4. These findings provide some theoretical insights for engineers to prepare photocatalysts with higher activity and stability. [ABSTRACT FROM AUTHOR]

Maleic anhydride-modified homopolymerized polypropylene (PP-g-MAH) and maleic anhydride-modified polyolefin elastomer (POE-g-MAH) were used as bulking agents to improve the poor processing and mechanical properties of highly filled composites due to high filler content. In this study, a series of linear low-density polyethylene (LLDPE)/magnesium hydroxide (MH) composites were prepared by the melt blending method, and the effects of the compatibilizer on the mechanical properties, flame retardancy, and rheological behavior of the composites were investigated. The addition of the compatibilizer decreased the limiting oxygen index (LOI) values of the composites, but they were all greater than 30.00%, which belonged to the flame retardant grade. Mechanical property tests showed that the addition of the compatibilizer significantly increased the tensile and impact strengths of the LLDPE/60MH (MH addition of 60 wt%) composites. Specifically, the addition of 5 wt% POE-g-MAH increased 154.07% and 415.47% compared to the LLDPE/60MH composites, respectively. The rotational rheology test showed that the addition of the compatibilizer could effectively improve the processing flow properties of the composites. However, due to the hydrocarbon structure of the compatibilizer, its flame retardant properties were adversely affected. This study provides a strategy that can improve the processing and mechanical properties of highly filled composites. [ABSTRACT FROM AUTHOR]

The application of highly filled composites is limited by their poor processing and rheological properties due to the high loading of fillers. One possible solution to this problem is to use maleic anhydride grafted polypropylene (MAPP) with high melt index as compatibilizer and lubricant. Herein, magnesium hydroxide (MH)/linear low‐density polyethylene (LLDPE) composites with 60 wt% of MH were prepared using MAPP with three different melt flow indexes (MFI). The equilibrium torque and melt flow index tests show that the addition of MAPP with high MFI significantly improves the processability and flowability of MH/MAPP/LLDPE composites. The rheological studies show that it also leads to a substantial reduction in the viscosity and therefore MH/MAPP/LLDPE composites exhibit more solid‐like responses. The scanning electron microscopy shows that a transition layer is formed at the MH‐LLDPE interface. The flame retardancy test shows that the addition of MAPP slightly reduces the flame retardancy of the composites as evidenced by the reduced limiting oxygen index and increased total heat release. Cone calorimeter test shows that the simultaneous addition of MH and MAPP has a synergistic smoke suppression effect. [ABSTRACT FROM AUTHOR]

The poor processing and rheological properties of highly filled composites caused by the high loading of fillers can be improved with the use of maleic anhydride grafted polyethylene wax (PEWM) as compatibilizer and lubricant. In this study, two PEWMs with different molecular weights were synthesized by melt grafting, and their compositions and grafting degrees were characterized by Fourier transform infrared (FTIR) spectroscopy and acid-base titration. Subsequently, magnesium hydroxide (MH)/linear low-density polyethylene (LLDPE) composites with 60 wt% of MH were prepared using polyethylene wax (PEW) and PEWM, respectively. The equilibrium torque and melt flow index tests indicate that the processability and fluidity of MH/MAPP/LLDPE composites are significantly improved with the addition of PEWM. The addition of PEWM with a lower molecular weight leads to a substantial reduction in viscosity. The mechanical properties are also increased. The limiting oxygen index (LOI) test and cone calorimeter test (CCT) show that both PEW and PEWM have adverse effects on flame retardancy. This study provides a strategy to simultaneously improve the processability and mechanical properties of highly filled composites. [ABSTRACT FROM AUTHOR]

Copyright of Acta Oto-Laryngologica is the property of Taylor & Francis Ltd and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Acta Oto-Laryngologica is the property of Taylor & Francis Ltd and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Atomic magnetometry has spectacular magnetic field sensitivity at room temperature. Here, we theoretically and experimentally investigate the benefits of a multi-pass cell in magnetometers using nonlinear magneto-optical rotation interrogation. Our theoretical analysis shows that there is an improvement in the signal-to-noise ratio (SNR) and consequently on the magnetic field sensitivity by carefully choosing the number of passes through the medium. In our specific case, we experimentally demonstrate a 160% enhancement in the magnetometer sensitivity by using a triple-pass cell, and it is consistent with our analysis on the SNR. This work provides a pathway to evaluate the benefits of multi-pass cells in high-performance atomic magnetometers. [ABSTRACT FROM AUTHOR]

Light shift arising from the circularly polarized pump beam in atomic magnetometers can induce an undesired magnetic response, and thus affect their accuracy. Here, the light shift and the corresponding cross-talk effect in the magnetometer have been investigated, and a scheme with an additional off-resonant pump beam with an appropriate polarization and intensity has been proposed to effectively reject the light shift. And the experimental results reproduce the expected behavior. This scheme provides a powerful tool to reject the light shift in optical pumping systems, in particular, the hybrid optically pumped systems. [ABSTRACT FROM AUTHOR]

For the atomic gyroscope (AG) operated in spin-exchange relaxation-free (SERF) regime, the sensitivity to external magnetic fields has been suppressed while the ability to sense inertial rotations has been kept. Here, a theoretical relationship between the magnetic fields and the AG response is given, and the influence of field fluctuations on the systematic stability is also shown. The spin-exchange rate of the electron spins R se en and the relaxation rate of the nuclear spins R tot n aggravate the influence of the field component B x . Experimental results indicate that the contributions of long-term fluctuations in the fields, approximately 2.4 pT/h for B x and 0.9 pT/h for B y , to the bias stability are 2.19 × 10 −2 deg/h and 5.29 × 10 −4 deg/h. This work is not only valuable for understanding the field-suppression effect in SERF AG, but also provides a useful tool for identifying the influence of fields on the systematic stability. [ABSTRACT FROM AUTHOR]

Lithium is a vital aspect of the strategic development of the alternative energy and nuclear industries, and the demand for this metal is currently increasing rapidly. China possesses significant lithium resources, nearly 80 % of which are situated in salt lake brine. Solvent extraction is a viable means of extracting lithium ions from brine that has high magnesium-to-lithium ratio, and provides high selectivity along with ready scale-up to industrial production levels. The most common extraction technology for such scenarios is the tributyl phosphate (TBP)-FeCl 3 -kerosene system. However, this system tends to lose Fe3+ during the extraction process and the concurrent use of acid and alkali can seriously affect the stability of the organic phase. The present work demonstrates a new extraction process employing TBP as the main extractant, sodium tetraphenyl boron as a co-extractant and phenethyl isobutyrate as a diluent. Optimization of the relative amounts of these components along with the phase ratio provided a single-stage lithium ion extraction efficiency of 85.70 % together with a separation factor of lithium to magnesium ions of 1175. The organic phase was washed with a LiCl + NaCl solution to remove impurity ions then stripped five times with a NaHCO 3 solution, with a Li+ stripping efficiency >99 %. During ten replicate extractions, the Li+ extraction efficiency remained stable at approximately 84 %, demonstrating good stability. NMR spectra verified that the binding strength of metal cations to TBP decreased in the order of Li+ > Na+ ≫ Mg2+, indicating selectivity for the extraction of Li+. This single step NaHCO 3 method was adopted to simplify the extraction process. The overall strategy avoids the use of strong acids or bases that otherwise corrode equipment and provides greatly improved long-term stability of the organic phase. • TBP-sodium tetraphenyl boron-phenethyl isobutyrate extraction system was proposed. • A single-stage extraction efficiency of 85.70 % for lithium ion could be obtained. • The maximum separation factor of lithium to magnesium ions reached up to 1175. • NaHCO 3 was used as stripping agent to simplify the extraction process. • The proposed extraction system showed high stability and reusability. [ABSTRACT FROM AUTHOR]

Atomic spin gyroscope (ASG) based on comagnetometer is a high sensitive and compact gyroscope for future inertial navigation applications. The start-up time was several hours of the demonstrated ASGs based on He-K or Ne-Rb-K comagnetometer, and only a few inertial navigation applications allow such a long time for preparation. We report the demonstration of an ASG based on Xe-Cs comagnetometer, which decreases the start-up time to 10 minutes and decreases the operation temperature by 40% as well. By operating this ASG in spin exchange relaxation free regime, a sensitivity of 7×10 °/(s Hz) was achieved. [ABSTRACT FROM AUTHOR]

Low-dimensional semiconductors exhibit remarkable performances in many device applications because of their unique physical, electrical, and optical properties. In this paper, we report a novel and facile method to synthesize In2S3 quantum dots (QDs) at atmospheric pressure and room temperature conditions. This involves the reaction of sodium sulfide with indium chloride and using sodium dodecyl sulfate (SDS) as a surfactant to produce In2S3 QDs with excellent crystal quality. The properties of the as-prepared In2S3 QDs were investigated and photodetectors based on the QDs were also fabricated to study the use of the material in optoelectronic applications. The results show that the detectivity of the device stabilizes at ~ 1013 Jones at room temperature under 365 nm ultraviolet light irradiation at reverse bias voltage. [ABSTRACT FROM AUTHOR]

We describe a dual-axis atomic spin gyroscope based on an alkali metal-noble gas comagnetometer. Alkali metal vapor is optically pumped, and then the noble gas is hyperpolarized along the z axis. When sensing a transverse rotation, the polarized noble gas will be induced to precess and produce an effective magnetic field in the x – y plane for alkali metals to precess under. Operating in the spin-exchange relaxation-free regime, alkali atoms are modulated by the z axis magnetic field and serve as an integrated in-situ dual-axis magnetometer to detect the gyroscopic precession in the x and y axes simultaneously, using a single probe beam. By using the parametric modulation technique, the low frequency drift is effectively suppressed and a bias instability of less than 0.05 deg/h has been achieved in our dual-axis atomic spin gyroscope. [ABSTRACT FROM AUTHOR]

• Beside the main phase of zincblende, a small amount of wurtzite is existed in CVD ZnS. • The mechanical properties of CVD ZnS were characterized with a slight variation of Zn/S ratio. • Zn 46.84 S 53.16 presents a high flexural strength of 133.8 MPa. • XRD, SEM, and Raman spectra of CVD ZnS were conducted. Polycrystalline ZnS samples with a slight composition fluctuation are grown by chemical vapor deposition (CVD) method, and their optical and mechanical properties and microstructure were investigated in detail. The CVD samples present a maximum transmittance of ∼73% in the 7–10 μm region. By changing the sulfur content, a maximum Knoop hardness of 2.375 GPa was found in the Zn 50.06 S 49.94 sample, while Zn 46.84 S 53.16 presents a high flexural strength of 133.8 MPa. The microstructural origin of this abnormal changing of mechanical properties was discussed according to the results of micrographs, XRD patterns and Raman spectra. The results suggest that beside the main phase of zincblende, a small amount of wurtzite is existed. This composited microstructure is responsible for the higher hardness and strength of CVD ZnS. [ABSTRACT FROM AUTHOR]

Atomic vapour magnetometers sense the local magnetic field strength by measuring the resulting precession rate of a well-defined quantum state. An essential prerequisite for this approach is a requirement to drive the media into this quantum state, which is frequently achieved via optical pumping. In real-world alkali-metal atoms, with their multiplicity of ground states, the optical pumping process is necessarily lossy, with a large fraction of the atoms being lost to quantum states that do not contribute to the useful magnetically sensitive signal. This consequently reduces the sensitivity of all optically-pumped atomic sensors. Here we theoretically and experimentally study the population changes of the quantum ground states of 87 Rb during optical pumping. We use this understanding to develop a repumping scheme that allows us to increase the number of atoms that are contributing to the useful magnetic sensing output. Unlike prior schemes, our approach delivers this improved sensitivity with significantly suppressed fictitious magnetic fields associated with the repumping, which would otherwise reduce the accuracy of the sensor. When operated at Earth's field strength (∼50µT), the repumped sensor shows a magnetic sensitivity of 200 fT/Hz, that is nearly three times higher than the non-repumped version.

Versatile applications have driven a desire for dual-band detection that enables seeing objects in multiple wavebands through a single photodetector. In this paper, a concept of using graphene/p-GaN Schottky heterojunction on top of a regular AlGaN-based p-i-n mesa photodiode is reported for achieving solar-/visible-blind dual-band (275 nm and 365 nm) ultraviolet photodetector with high performance. The highly transparent graphene in the front side and the polished sapphire substrate at the back side allows both top illumination and back illumination for the dual band detection. A system limit dark current of 1×10 -9 A/cm 2 at a negative bias voltage up to -10 V has been achieved, while the maximum detectivity obtained from the detection wavebands of interests at 275 nm and 365 nm are ∼ 9.0 ×10 12 cm·Hz 1/2 /W at -7.5 V and ∼8.0 × 10 11 cm·Hz 1/2 /W at +10 V, respectively. Interestingly, this new type of photodetector is dual-functional, capable of working as either photodiode or photoconductor, when switched by simply adjusting the regimes of bias voltage applied on the devices. By selecting proper bias, the device operation mode would switch between a high-speed photodiode and a high-gain photoconductor. The device exhibits a minimum rise time of ∼210 µs when working as a photodiode and a maximum responsivity of 300 A/W at 6 μW/cm 2 when working as a photoconductor. This dual band and multi-functional design would greatly extend the utility of detectors based on nitrides.

We propose a far off-resonance laser frequency stabilization method by using multipass cells in Rb Faraday rotation spectroscopy. Based on the detuning equation, if multipass cells with several meters optical path length are used in the conventional Faraday spectroscopy, the detuning of the lock point can be extended much further from the alkali metal resonance. A plate beam splitter was used to generate two different Faraday signals at the same time. The transmitted optical path length was L=50  mm and the reflected optical path length was 2L=100  mm. When the optical path length doubled, the detuning of the lock points moved further away from the atomic resonance. The temperature dependence of the detuning of the lock point was also analyzed. A temperature-insensitive lock point was found near resonance when the cell temperature was between 110°C and 130°C. We achieved an rms fluctuation of 0.9 MHz/23 h at a detuning of 0.5 GHz. A frequency drift of 16 MHz/h at a detuning of -5.6  GHz and 4 MHz/h at a detuning of -5.2  GHz were also obtained for the transmitted and reflected light Faraday signal.

The fluctuations of the probe light intensity seriously affect the performance of the sensitive atomic magnetometer. Here we propose a novel method for the intensity stabilization based on the second harmonic component of the photoelastic modulator (PEM) detection in the atomic magnetometer. The method not only could be used to eliminate the intensity fluctuations of the laser source, but also remove the fluctuations from the optical components caused by the environment. A relative fluctuation of the light intensity of 0.035% was achieved and the corresponding fluctuation of the output signal of the atomic magnetometer has decreased about two orders of magnitude from 4.06% to 0.041%. As the scheme proposed here only contains optical devices and does not require additional feedback controlled equipments, it is especially suitable for the integration of the atomic magnetometer.

We study the influence of the cell temperature on the sensitivity of the spin-exchange relaxation free (SERF) magnetometer and analyze the possibility of operating at a low temperature. Utilizing a 25 × 25 × 25 mm(3) Cs vapor cell with a heating temperature of 85 °C, which is almost half of the value of potassium, we obtain a linewidth of 1.37 Hz and achieve a magnetic field sensitivity of 55 fT/Hz(1/2) in a single channel. Theoretical analysis shows that fundamental sensitivity limits of this device with an active volume of 1 cm(3) could approach 1 fT/Hz(1/2). Taking advantage of the higher saturated vapor pressure, SERF magnetometer based on Cs opens up the possibility for low cost and portable sensors and is particularly appropriate for lower temperature applications.

We present a method to determine and suppress the light shift in an atomic spin gyroscope. This method doesn't require additional drive source or frequency modulation, and it is based on the dynamics of an atomic spin gyroscope to determine a clean curve as a function of the frequency of the pump beam that predicts the zero light shift. We experimentally validate the method in a Cs-(129)Xe atomic spin gyroscope and verify the results through numerical simulations. This method can also be applied to an atomic spin magnetometer based on the spin-exchange relaxation-free exchange that experiences light shift. The method is useful for atomic spin devices because it can improve long-term performance and reduce the influence of the laser.