Search

It is very difficult to control the distributed parameter system (DPS) for consistent spatial performance. In this paper, a dual scale spatio‐temporal control is designed for the DPS to achieve a consistent performance across the entire workspace under unknown exogenous disturbances. First, the generalized “spatial observer” should be designed under spectral decomposition/synthesis, to act as the nominal model of the DPS, through which the spatial mismatch between the model and the process could be estimated. Then a distributed disturbance compensator can be constructed to suppress all the undesirable spatial disturbance through the inner loop, and the compensated system will become closer to the nominal model and easier to control. Third, a dual controller will be designed in the outer loop for the final consistent spatial performance. Since the spatial performance is mainly affected by the dominant dynamics on the slow scale, a convex optimization algorithm can be effectively established in terms of nonlinear matrix inequalities for the dual controller. In this way, the nonlinear optimization problem is solved by converting it into the problem of a linear matrix inequalities with constraints. Besides, the spatio‐temporal state variable of the controlled plant is demonstrated to converge in Hilbert space. The feasibility and effectiveness of the proposed control method are verified by temperature control of a catalytic rod, a benchmark in chemical reactors. [ABSTRACT FROM AUTHOR]

This study addresses adaptive fuzzy control for an axially moving slung-load cable system (AMSLCS) of a helicopter in the presence of an actuator fault, system uncertainty, and disturbances with the aid of a fuzzy logic system (FLS). The actuator fault considered is depicted by a more general faulty plant that includes an unknown actuator gain fault and a fault deviation vector. First, to compensate for system uncertainty and the fault deviation vector, a fuzzy control technique is adopted. Then, under the introduced FLS, a novel adaptive fuzzy control law is developed by employing a rigorous Lyapunov derivation. The closed-loop system of the AMSLCS is proved to be uniformly bounded even when considering the actuator fault, system uncertainty, and disturbances. Finally, a simulation is executed to expound the performance of the developed controller. [ABSTRACT FROM AUTHOR]

A 2-D spatial construction method is proposed for the online modeling of distributed parameter systems (DPSs), such as battery thermal process. The proposed method can combine the advantages of spectral method and Karhunen–Loève decomposition (KLD) method. First, the continuous spatial basis functions are designed by the 2-D spatial construction to keep the information between sensing locations. With the 2-D space-time separation and recursive learning, the derived model can preserve the couplings between spatial dimensions and update over time. The radial basis function network is utilized to identify the low-dimensional temporal dynamics. After the space-time synthesis, the constructed spatiotemporal model can provide continuous modeling of the DPS with satisfactory performance. Convergence analysis has been carried out, which proves that the proposed method can guarantee bounded errors. Finally, simulations and experiments on a pouch-type lithium-ion battery with unknown partial differential equations prove the effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

Due to the lightly damped resonance and intrinsic nonlinearities, it is difficult for the piezoactuated nanopositioning stage to realize high-bandwidth and high-accuracy control. To handle these limitations, in this work, a dual-loop control scheme based on state-feedback-based modal method is designed to both actively damp and stiffen the resonant mode and to suppress the effects of nonlinearities of the piezoactuated nanopositioning stage. In this scheme, the state-feedback-based modal controller is first designed in the inner loop to enlarge both the damping ratio and natural frequency of the first resonant mode. Then, a proportional–integral (PI) controller is utilized in the outer loop for eliminating the tracking errors caused by other disturbances and nonlinearities including hysteresis and creep. To maximize the control bandwidth of system under the proposed dual-loop scheme, an optimization method is thus proposed for simultaneously tuning the parameters of the inner and the outer loop controllers. Finally, to validate the proposed dual-loop control scheme, comparative experiments are carried out on a piezoactuated nanopositioning stage. Results demonstrate that the proposed control scheme improves the bandwidth of the system from 497 Hz (with PI control) and 1543 Hz (with a commonly used positive acceleration, velocity, and position damping control and a PI controller) to 6546 Hz, which is 664 Hz larger than the first resonant frequency of the original system, validating the effectiveness of the proposed dual-loop scheme on high-bandwidth control. Note to Practitioners—The demand of high-bandwidth and high-accuracy piezoactuated nanopositioning stages increases rapidly. However, the lightly damped resonance of the mechanism and the intrinsic nonlinearities of the piezoelectric actuator limit the tracking performance of the stage. A dual-loop control structure is adopted in this work to improve the tracking performance of the nanopositioning stage. Different from most of the vibration control methods proposed in the literature which aimed only at improving the damping ratio, a state-feedback-based modal controller is designed in the inner-loop for improving both the damping ratio and the stiffness of the system. This task is realized by re-placing the resonant poles of the system to the optimized location. The outer-loop controller adopts the high-gain PI control for eliminating the tracking errors. More importantly, in order to realize the high-bandwidth and high-accuracy control, a numerical optimization method is proposed for simultaneously tuning the parameters of the controllers in inner and outer loops. The controller design is simple, and it can be applied to other systems with second or higher order in which the first resonant mode dominates the system dynamics. [ABSTRACT FROM AUTHOR]