Search

The purpose of this study was to investigate the applicability of the Gastrointestinal Simulator (GIS), a multi-compartmental dissolution model, to predict the in vivo performance of Biopharmaceutics Classification System (BCS) Class IIa compounds. As the bioavailability enhancement of poorly soluble drugs requires a thorough understanding of the desired formulation, the appropriate in vitro modelling of the absorption mechanism is essential. Four immediate release ibuprofen 200 mg formulations were tested in the GIS using fasted biorelevant media. In addition to the free acid form, ibuprofen was present as sodium and lysine salts in tablets and as a solution in soft-gelatin capsules. In the case of rapid-dissolving formulations, the dissolution results indicated supersaturation in the gastric compartment, which affected the resulting concentrations in the duodenum and the jejunum as well. In addition, a Level A in vitro–in vivo correlation (IVIVC) model was established using published in vivo data, and then the plasma concentration profiles of each formulation were simulated. The predicted pharmacokinetic parameters were consistent with the statistical output of the published clinical study. In conclusion, the GIS method was found to be superior compared to the traditional USP method. In the future, the method can be useful for formulation technologists to find the optimal technique to enhance the bioavailability of poorly soluble acidic drugs.

Isoflavonoids with various structural elements show a promising potential effect on central nervous system activities. Despite their favorable medicinal properties, the pharmacokinetic characteristics of this thoroughly investigated group of natural phenolics have only been described to a limited extent. Regarding the lack of information about the BBB permeability of isoflavones, isoflavanones, and pterocarpans found in Ononis species, the aim of our study was to investigate their physico-chemical properties influencing their absorption and distribution. Furthermore, we aimed to characterize the possible MAO-B inhibiting features of Ononis isoflavonoids in silico. Octanol-water partitioning and BBB-PAMPA permeability of formononetin, calycosin D, onogenin, sativanone, medicarpin and maackiain were assessed for the first time in our study. The log P values ranged from 2.21 to 3.03 and log D7.4 values from 2.48 to 3.03, respectively, indicating optimal polarity for BBB permeation. The results of PAMPA-BBB expressed as log Pe values fell between -5.60 and -4.45, predicting their good permeation capability as well. The effective permeability values showed structure-dependent differences, indicating that the pterocarpan type skeleton was the most preferred type, followed by isoflavanones, then isoflavones. The methoxy or methylenedioxy substitution of the same skeleton did not influence the permeability significantly, contrary to an additional hydroxyl group. Membrane retention showed a similar structure dependent pattern to that of effective permeability, ranging from 16% to 70%. For the identification of volumes of chemical space related to particular biological activities the ChemGPS-NP framework was used. The MAO-B inhibitory potency and selectivity were also predicted and validated. Based on our results, MAO-B inhibitory potency could be predicted with good precision, but in the case of selectivity, only the direction could be concluded (favors MAO-B or MAO-A), not the magnitude. Our finding reflects that Ononis isoflavonoid aglycones show an excellent fit with the suggested parameters for BBB permeability and this is the first study to confirm the highly favorable position of these natural products for MAO-B inhibition.

Particle size reduction is a commonly used process to improve the solubility and the dissolution of drug formulations. The solubility of a drug in the gastrointestinal tract is a crucial parameter, because it can greatly influence the bioavailability. This work provides a comprehensive investigation of the effect of the particle size, pH, biorelevant media and polymers (PVA and PVPK-25) on the solubility and dissolution of drug formulations using three model compounds with different acid-base characteristics (papaverine hydrochloride, furosemide and niflumic acid). It was demonstrated that micronization does not change the equilibrium solubility of a drug, but it results in a faster dissolution. In contrast, nanonization can improve the equilibrium solubility of a drug, but the selection of the appropriate excipient used for nanonization is essential, because out of the two used polymers, only the PVPK-25 had an increasing effect on the solubility. This phenomenon can be explained by the molecular structure of the excipients. Based on laser diffraction measurements, PVPK-25 could also inhibit the aggregation of the particles more effectively than PVA, but none of the polymers could hold the nanonized samples in the submicron range until the end of the measurements.

Creating supersaturating drug delivery systems to overcome the poor aqueous solubility of active ingredients became a frequent choice for formulation scientists. Supersaturation as a solution phenomenon is, however, still challenging to understand, and therefore many recent publications focus on this topic. This work aimed to investigate and better understand the pH dependence of supersaturation of telmisartan (TEL) at a molecular level and find a connection between the physicochemical properties of the active pharmaceutical ingredient (API) and the ability to form supersaturated solutions of the API. Therefore, the main focus of the work was the pH-dependent thermodynamic and kinetic solubility of the model API, TEL. Based on kinetic solubility results, TEL was observed to form a supersaturated solution only in the pH range 3–8. The experimental thermodynamic solubility-pH profile shows a slight deviation from the theoretical Henderson–Hasselbalch curve, which indicates the presence of zwitterionic aggregates in the solution. Based on pKa values and the refined solubility constants and distribution of macrospecies, the pH range where high supersaturation-capacity is observed is the same where the zwitterionic form of TEL is present. The existence of zwitterionic aggregation was confirmed experimentally in the pH range of 3 to 8 by mass spectrometry.

Absorption through the skin of topically applied chemicals is relevant for both formulation development and safety assessment, especially in the early stages of development. However, the supply of human skin is limited, and the traditional in vitro methods are of low throughput. As an alternative, an artificial membrane-based Skin Parallel Artificial Membrane Permeability Assay (Skin-PAMPA) has been developed to mimic the permeability through the stratum corneum. In this study, this assay was used to measure the permeability of a model compound, 4-phenylethyl-resorcinol (PER), dissolved in 13 different solvents that are commonly used in cosmetic formulation development. The study was performed at concentrations close to the saturated solution of PER in each solvent to investigate the maximum thermodynamic potential of the solvents. The permeability of PER in selected solvents was also measured on ex vivo pig skin for comparison. Pig ear skin is an accepted alternative model of human skin. The permeability coefficient, which is independent of the concentration of the applied solution, showed a good correlation (R2 = 0.844) between the Skin-PAMPA and the pig skin permeation data. Our results support the use of the Skin-PAMPA to screen the suitability of different solvents for non-polar compounds at an early stage of formulation development.

This commentary addresses data quality in equilibrium solubility measurement in aqueous solution. Broadly discussed is the “gold standard” shake-flask (SF) method used to measure equilibrium solubility of ionizable drug-like molecules as a function of pH. Many factors affecting the quality of the measurement are recognized. Case studies illustrating the analysis of both solution and solid state aspects of solubility measurement are presented. Coverage includes drug aggregation in solution (sub-micellar, micellar, complexation), use of mass spectrometry to assess aggregation in saturated solutions, solid state characterization (salts, polymorphs, cocrystals, polymorph creation by potentiometric method), solubility type (water, buffer, intrinsic), temperature, ionic strength, pH measurement, buffer issues, critical knowledge of the pKa, equilibration time (stirring and sedimentation), separating solid from saturated solution, solution handling and adsorption to untreated surfaces, solubility units, and tabulation/graphic presentation of reported data. The goal is to present cohesive recommendations that could lead to better assay design, to result in improved quality of measurements, and to impart a deeper understanding of the underlying solution chemistry in suspensions of drug solids.

Transdermal drug delivery has been growing extensively in the past decades, therefore new, reliable and cost-effective in vitro models were demanded to support the research and development on this field. Model membrane of PAMPA mimicking skin penetration was first described in 2006, but the need for more bio-mimetic system has been arisen by new industrial tendencies and a bio-relevant system was published in 2012. Since its first publication Skin PAMPA has already been applied by several universities and industrial groups successfully and the first articles, podium and poster presentations have been appeared. The original Skin PAMPA model has been further developed in order to extend its application for formulations. Examples of liquid or semi-solid formulation projects and transdermal patch studies are available beside standard solution applications. The present review demonstrates the different approaches needed for various type of samples, provides examples of applications and practical conclusions for further improvement.

A novel general approach was described to address many of the challenges of salt solubility determination of drug substances, with data processing and refinement of equilibrium constants encoded in the computer program pDISOL-XTM. The new approach was illustrated by the determinations of the solubility products of diprenorphine hydrochloride, codeine hydrochloride and phosphate, lidocaine hydrochloride and phosphate at 25 oC, using a recently-optimized saturation shake-flask protocol. The effects of different buffers (Britton-Robinson universal and Sörensen phosphate) were compared. Lidocaine precipitates were characterized by X-ray powder diffraction (XRPD) and polarization light microscopy. The ionic strength in the studied systems ranged from 0.25 to 4.3 M. Codeine (and possibly diprenorphine) chloride were less soluble than the phosphates for pH > 2. The reverse trend was evident with lidocaine. Diprenorphine saturated solutions showed departure from the predictions of the Henderson-Hasselbalch equation in alkaline (pH > 9) solutions, consistent with the formation of a mixed-charge anionic dimer.

Ceramides play a crucial role in the barrier function of the skin as well as in transmembrane signaling. In this study long aliphatic chain tartaric acid diamides able to replace ceramides in an in vitro model of the stratum corneum lipid matrix due to their similar physico-chemical properties were synthesized from diacetoxysuccinic anhydride in four steps. Their pro-apoptotic effect on fibroblast cells was also investigated.