Search

Deflection and stress calculated from an experimentally validated, high-fidelity finite element model (FEM) of a photovoltaic module experiencing mechanical load was compared to results from a simplified FEM treating the module laminate as a homogenized composite using a rule of mixtures approach, and further compared to analytical calculations treating the module as a Kirchoff-Love flat plate. The goal of this study was to determine the error incurred by analyzing module mechanics with varying levels of simplification, since resolving the aspect ratios of a module is computationally expensive. Homogenized FEMs were found to underpredict peak deflection under a 1.0 kPa load by between 13 and 19% for lower and upper bound application of the rule of mixtures. However, module shape was captured, implying that a useful replication of a resolved model could be achieved with a reduced, calibrated material stiffness. Homogenized stress results captured glass layer tensile stress components to within 46 to 52% at a sample location of interest, though agreement was poor through the remainder of the laminate due to the lack of material resolution. For plate theory, deflection was overpredicted by 45 to 67% for upper and lower bound homogenizations, and frame-adjacent module shapes were not adequately replicated. Stress results mirrored FEM trends but magnitudes were not well correlated to resolved model values. These results support the use of homogenized laminate models for module shape derivation, though resolved models remain necessary for stress analyses. The accuracy of plate theory was found to be inadequate for most applications. [ABSTRACT FROM AUTHOR]

Discrete Dislocation Dynamics (DDD) simulations are a powerful simulation methodology that can predict a crystalline material's constitutive behavior based on its loading conditions and micro-constituent population/distribution. In this paper, a 3D DDD model with spiral dislocation sources is developed to study size-dependent plasticity in a pure metal material (taken here as Aluminum). It also shows, for the first time, multipole simulations of spirals and how they interact with one another. In addition, this paper also discusses how the free surface of a crystalline material affects the plasticity generation of the spiral dislocation. The surface effect is implemented using the Distributed Dislocation Method. One of the main results from this work, shown here for the first time, is that spiral dislocations can result in traditional Frank–Read sources (edge or screw character) in a crystal. Another important result from this paper is that with more dislocation sources, the plastic flow inside the material is more continuous, which results in a lowering of the flow stress. Lastly, the multipole interaction of the spiral dislocations resulted in a steady-state fan-shaped action for these dislocation sources. [ABSTRACT FROM AUTHOR]

A numerical code has been designed and implemented to find the stress at any material point in a holed wedge material due to any number of crystal or real screw dislocations in the wedge. The code implements the image dislocation method together with the collocation-point method to find stresses at any material point. We demonstrate that the combined analytical–numerical method (analytical with the image dislocations and numerical with the collocation-point method) is valid in that it produces stress fields giving rise to zero traction on free surfaces as well at an arbitrary number of collocation points on void surfaces. In addition, the method makes it possible to find the Peach–Koehler force (PKF) acting on a real screw dislocation at any point in the wedge, as well as to determine points of equilibrium, where the PKF is zero. Numerous and easy to interpret contour plots reveal the utility of this method which was carried out using the mathematical software MATLAB. [ABSTRACT FROM AUTHOR]

Standard text-book dislocation theory for the elastic fields of a dislocation is provided in an infinite medium. For problems involving free surfaces, or image stresses, the solution for such elastic fields is more complex. The current article extends the state of knowledge for problems with free surfaces to address the stress field of a screw dislocation in a plate (two planar free surfaces) containing a hole/void. Such surfaces interact and thus affect the stress field of a dislocation in deviation of the infinite medium solution. The numerical solutions provided herein, based on reflective image stresses and the collocation-point method, have been verified to the extent available and such solutions allow for further applied problems. One main finding of the paper is that the equilibrium location of a screw dislocation is always closer to the hole/void surface than the planar free surface. [ABSTRACT FROM AUTHOR]

A finite element model of the human dentate mandible has been developed to provide a comparison of fixation systems used currently for fracture reduction. Volume domains for cortical bone, cancellous bone, and teeth were created and meshed in ANSYS 8.0 based on IGES curves created from computerized tomography data. A unilateral molar clench was loaded on the model with a fracture gap simulated along the symphysis. Results based on Von Mises stress in cortical and cancellous bone surrounding the screws, and on fracture surface spatial fixation, show some relative differences between different screw-plate systems, yet all were judged to be appropriate in their reduction potential. [DOI: 10.1115/1.2244575]

Author(s): Tomas Diaz de la Rubia (corresponding author) [1]; Hussein M. Zbib [2]; Tariq A. Khraishi [2]; Brian D. Wirth [1]; Max Victoria [3]; Maria Jose Caturla [1] The irradiation [...]

A numerical treatment of the dislocation image stress problem applicable to three-dimensional (3-D) dislocation dynamics (DD) is presented. The new method is presented to handle this problem, which meshes the external surfaces of the DD computational box with prismatic dislocation loops.

The influence of carbon nanotube dispersion techniques (surfactant-assisted dispersion, ultrasonication and magnetic stirring) and surface functionalization of carbon nanotubes on mechanical properties of nanocomposites fabricated via powder metallurgy techniques is characterized. Functionalized multiwalled carbon nanotubes dispersed using a combination of techniques results in Al/functionalized multiwalled carbon nanotube composites with excellent microstructure and enhanced mechanical properties. Nonfunctionalized carbon nanotubes dispersed using zwitterionic surfactants show good dispersion patterns on Al powder surfaces and results in composites with good strength and relative densities are also obtained. Carbon nanotubes dispersed solely via shear mixing techniques resulted in highly embrittled composites with poor microstructure. Also discussed in this study is the usefulness of scanning electron microscopy in conjunction with image analysis techniques in characterizing porosity in Al/carbon nanotube composites. [ABSTRACT FROM AUTHOR]

Measurement and modeling of gas flows in microelectromechanical systems (MEMS) scale channels are relevant to the fundamentals of rarefied gas dynamics (RGD) and the practical design of MEMS-based flow systems and micropumps. We describe techniques for building robust, leak-free, rectangular microchannels which are relevant to micro- and nanofluidic devices, while the channels themselves are useful for fundamental RGD studies. For the first time, we report the isothermal steady flow of helium (He) gas through these channels from the continuum to the free-molecular regime in the unprecedented Knudsen range of 0.03–1000. On the high end, our value is 20-fold larger than values previously reported by Ewart et�al (2007 J. Fluid Mech.584 337–56). We accomplished this through a dual-tank accumulation technique which enabled the monitoring of very low flow rates, below 10−14�kg s−1. The devices were prebaked under vacuum for 24�h at 100��C in order to reduce outgassing and attain high Kn. We devised fabrication methods for controlled-depth micro-gap channels using silicon for both channel ceiling and floor, thereby allowing direct comparisons to models which utilize this simplifying assumption. We evaluated the results against a closed-form expression that accurately reproduces the continuum, slip, transition, and free-molecular regimes developed partly by using the direct simulation Monte Carlo method. The observed data were in good agreement with the expression. For Kn > ∼100, we observed minor deviations between modeled and experimental flow values. Our fabrication processes and experimental data are useful to fundamental RGD studies and future MEMS microflow devices with respect to extremely low-flow measurements, model validation, and predicting optimal designs. [ABSTRACT FROM AUTHOR]

We report a study of the electrical and mechanical effects of the inclusion of a thin layer of multiwalled carbon nanotubes (MWCNTs) into the surface of polydimethylsiloxane (PDMS) as a method of creating an electrically actuated, flexible microfluidic valve. Samples of PDMS with various surface loadings of MWCNTs were prepared and tested using a uniaxial tension tester, combined with a four-point probe electrical test. In contrast to other works reporting the inclusion of MWCNTs in the bulk of the material, we have found that inclusion of the MWCNTs on the surface only has no discernible effect on the mechanical properties of the PDMS samples, but causes a significant and repeatable change in the electrical performance. We have found that a loading of 4.16 g m−2 results in an electrical resistivity of 7.31 × 10−4 Ω cm, which is 200% lower than that previously reported for bulk inclusion samples. The microstructure of the MWCNTs was found to consist of both individual fibers and spherical clumps of fibers. We suggest that, due to the microstructure of the MWCNTs used in this study, the mechanical properties can be modeled as a thin layer of particulates, while the electrical properties can be modeled as a thin bed of bulk MWCNTs. © 2012 Society of Chemical Industry [ABSTRACT FROM AUTHOR]

Analogous to mechanical systems, modeling the electromagnetic (EM) performance of large and complex metamaterial structures requires the use of effective-medium/constitutive properties. Constitutive properties are critical for efficiently bridging the gap between subwavelength geometry and performance at the mesoscale. In this article, the temperature-dependent effective medium properties for a metamaterial electric-inductive-capacitive (ELC) resonator are described analytically. ELC structures are commonly used in metamaterial designs to provide a tailored electric response to EM waves. An equivalent circuit model, coupled with analytic expressions for the capacitances, inductance, and resistance of the ELC resonator, is utilized to describe how thermally induced mechanical strain and changes in material properties manifest as temperature-dependent permittivity and permeability curves for the metamaterial. The resulting analytic expressions account for the effects of spatial dispersion and losses. This article also details how the process may be expanded to similarly describe the temperature-dependent constitutive properties of metamaterial magnetic resonators. [ABSTRACT FROM PUBLISHER]

Photonic crystals (PCs) are synthetic materials that are used to control light propagation. PCs have a frequency bandgap where light is forbidden to propagate. This bandgap is strongly tied to the microstructure of the photonic crystal. Three-dimensional tungsten photonic crystal in a Lincoln-log microstructure has been suggested as a strong alternative filter in photovoltaic cells with significantly high power efficiency. PCs have also been suggested as sensors for submicron damage. Therefore, mechanical characterization of three-dimensional photonic crystals becomes of interest. Here we report on mechanical characterization of tungsten PC using means of micro-indentation. We also present a three-dimensional finite element simulation of the structural response of a Tungsten photonic crystal under micro-indentation load. Stresses developed in the PC can be used to quantify the level of damage in the crystal. We compare our simulation results with the experimental observations of a Vickers and Knoop micro-indentation experiments of tungsten PC. The FE models were proven able to simulate the mechanical response of the PC with a good accuracy. The calibrated FE models can be further used to realize the mechanical behavior of PC under different thermal and mechanical stresses when used as filters in photovoltaic cells or to simulate the effect of damage in PC sensors. [ABSTRACT FROM AUTHOR]

Experimental and numerical methods are used to explore the stresses generated around bone screws used in rigid internal fixation of mandibular fractures. These results are intended to aid in decisions concerning both the design and the use of these bone screws. A finite element (FE) model of a human mandible is created with a fixated fracture in the parasymphyseal region. The mandibular model is anatomically loaded, and the forces exerted by the fixation plate onto the simplified screws are obtained and transferred to another finite element submodel of a screw implant embedded in a trilaminate block with material properties of cortical and cancellous bone. The stress in the bone surrounding the screw implant is obtained and compared for different screw configurations. The submodel analyses are further compared to and validated with simple axial experimental and numerical screw pull-out models. Results of the screw FE analysis (FEA) submodel show that a unicortical screw of 2.6mm major diameter and 1.0mm pitch will cause less bone damage than a bicortical screw of 2.3mm major diameter and 1.0mm pitch. The results of this study suggest that bicortical drilling can be avoided by using screws of a larger major diameter. [ABSTRACT FROM AUTHOR]

This paper presents dislocation dynamics simulations of the interaction of a circular dislocation pileup with a short rigid fiber as occurs, for example, in metal–matrix composites. The pile-up is composed of glide dislocation loops surrounding the fiber. Here, this problem is treated as a boundary value problem within the context of dislocation dynamics. The proper boundary condition to be enforced is that of zero displacements at the fiber–matrix interface. Such a condition is satisfied by a distribution of image rectangular dislocation loops meshing the fiber''s surface. This treatment is similar to crack modeling using distributed dislocations and falls under the category of “generalized image stress analysis”. The unknown in this problem is the Burgers vectors of the surface loops. Once those are found, the Peach–Koehler (PK) force acting on the circular dislocation loops, and emulating the fiber–dislocation interaction, can be determined and the dynamical arrangement of the circular pile-up evolves naturally from conventional dislocation dynamics analysis. [Copyright &y& Elsevier]

Objective: 1) Develop a hyperelastic computational model of skin viscoelastic properties for analysis of wound closures, and 2) Apply the model to variations of the rhombic skin flap to quantify closure force vectors and optimize wound closure tension. Method: A computational model employing the finite element method was created to simulate skin defect closure employing rhombic transposition flaps. Variables of transposition angle, flap width, and tissue undermining were analyzed. Outcome measures of tissue stress, strain, and wound distortion were evaluated and optimized for a standard defect. Results: A second order Yeoh hyperelastic model was fit to previously published experimental skin data with good approximation of observed properties. In the analysis of transposition flap closures of the 60 to 120 degree rhomboid defect, the model suggests that a biomechanically ideal flap design is constructed with distal flap angle of 30 degrees, as is employed in the Webster flap, with the donor site near margin oriented parallel to the short axis of the defect, as in the traditional Limberg flap. This configuration minimizes tissue stress and strain and most evenly distributes wound tension across the closure line. Conclusion: The model quantitatively demonstrates several recognized principles of the rhombic flap. Square defects, as compared with rhomboid defects, close with lower tissue strain, but form a larger standing cutaneous deformity. The Webster flap best distributes wound tension across the incision line, and the Dufourmental modification alters the closure force vector. [ABSTRACT FROM AUTHOR]

This work reports on a recent advancement in three-dimensional dislocation dynamics modelling. A method is presented for the treatment of dislocation image stresses resulting from the presence of nearby traction-free surfaces. The image stress-field of a dislocation segment below a finite-sized free surface is obtained by the distribution of N generally prismatic rectangular or square dislocation loops padding the area (the external bounding surfaces of the simulation box). The unphysical tractions created at surface collocation points by sub-surface crystal dislocations are annulled by proper determination of the loops' Burgers vectors. The image stresses on a dislocation segment are simply those stresses resulting from the surface loops. The accuracy can be improved by increasing the number of collocation points (i.e. surface loop density). [ABSTRACT FROM AUTHOR]