Search

In the event of a chemical, biological, radiological, or nuclear (CBRN) hazard release, emergency responders rely on respiratory protection to prevent inhalation of these hazards. The National Institute for Occupational Safety and Health's (NIOSH) CBRN Statement of Standard calls for CBRN respirator canisters to be challenged with 11 different chemical test representative agents (TRAs) during certification testing, which represent hazards from 7 distinct Chemical Families; these 11 TRAs were identified during the original 2001 CBRN hazard assessment. CBRN hazards are constantly evolving in type, intent of use, and ways of dissemination. Thus, new and emerging hazards must be identified to ensure CBRN canisters continue to provide protection to emergency responders against all hazards that would most likely be used in an intentional or unintentional event. The objectives are to: (1) update the CBRN list of hazards to ensure NIOSH-approved CBRN canisters continue to provide adequate protection capabilities from newly emerging chemical and radiological hazards and (2) identify the need to update NIOSH TRAs to ensure testing conditions represent relevant hazards. These objectives were accomplished by reviewing recent hazard assessments to identify a list of chemical and radiological respiratory hazards, evaluate chemical/physical properties and filtration behavior for these hazards, group the hazards based on NIOSH's current Chemical Families, and finally compare the hazards to the current TRAs based on anticipated filtration behavior, among other criteria. Upon completion of the evaluation process, 237 hazards were identified and compared to NIOSH's current CBRN TRAs. Of these 237 hazards, 203 were able to be categorized into one of NIOSH's current seven Chemical Families. Five were identified for further evaluation. Based on reviewing key chemical/physical properties of each hazard, NIOSH's current 11 TRAs remain representative of the identified respiratory CBRN hazards to emergency responders and should continue to be used during NIOSH certification testing. Thus, NIOSH's CBRN Statement of Standard remains unchanged. The process developed standardizes a methodology for future hazard evaluations. [ABSTRACT FROM AUTHOR]

For the first time, an increasing number of defects were introduced to the metal-organic framework UiO-66-NH2 in an attempt to understand the structure-activity trade-offs associated with toxic chemical removal. It was found that an optimum exists with moderate defects for toxic chemicals that react with the linker, whereas those that require hydrolysis at the secondary building unit performed better when more defects were introduced. The insights obtained through this work highlight the ability to dial-in appropriate material formulations, even within the same parent metal-organic framework, allowing for trade-offs between reaction efficiency and mass transfer. [ABSTRACT FROM AUTHOR]

An active phase of ferrihydrite was deposited on cotton using a simple dip-and-dry process. The iron loading was between 4 and 10%, depending on the form of cotton and the number of dip-and-dry cycles. The materials were tested for the removal of a mustard gas surrogate, 2-chloroethyl ethyl sulfide (CEES). The modified fibers showed enhanced photoreactivity and adsorption performance compared to bulk ferrihydrite. The analysis of the headspace and of the surface of the samples after exposure to CEES revealed the presence of reaction products, indicating the high chemical activity of the ferrihydrite phase. Reaction mechanisms involving sulfonium intermediates are proposed. The chemical activity is linked to the high dispersion of the inorganic phase, which increases the number of available catalytic sites and thus enhances the direct contact of these actives sites (OH terminal groups, Fe3+, defects) with CEES. [ABSTRACT FROM AUTHOR]

Hydrogen peroxide (H 2 O 2 ) is a highly effective decontaminant against chemical warfare agents (CWAs) when present both in a liquid and as a solid powder. For the latter, this can be in the form of H 2 O 2 being complexed to a polymer, such as polyvinylpyrrolidone (PVP). While a H 2 O 2 -PVP complex is indeed effective at decontaminating CWAs, it is vulnerable to environmental conditions such as high relative humidities (RH), which can dissociate the H 2 O 2 from the complex before it is given the opportunity to react with CWAs. In this paper, we demonstrate that the cross-linked version of PVP forms a highly stable complex with H 2 O 2 , which can withstand both high (40 °C) and low (-20 °C) temperatures as well as maintain stability at high RH up to 90% over several days. Collectively, this lays the framework for processing the H 2 O 2 -PVP complex in a variety of form factors that can maintain efficacy under a wide range of real-world environmental conditions.

A strategy is developed to enhance the barrier protection of polyethylene oxide (PEO)-metal-organic framework (MOF) composite films against chemical warfare agent simulants. To achieve enhanced protection, an impermeable high-aspect-ratio filler in the form of Laponite RD (LRD) clay platelets was incorporated into a composite PEO film containing MOF UiO-66-NH 2 . The inclusion of the platelets aids in mitigating permeation of inert hydrocarbons (octane) and toxic chemicals (2-chloroethyl ethyl sulfide, 2-CEES) of dimensions/chemistry similar to prominent vesicant threats while still maintaining high water vapor transport rates (WVTR). By utilizing small-angle neutron scattering, small-angle X-ray scattering, and wide-angle X-ray scattering, the LRD platelet alignment of the films was determined, and the structure of the films was correlated with performance as a barrier material. Performance of the membranes against toxic chemical threats was assessed using permeation testing of octane and 2-CEES, a common simulant for the vesicant mustard gas, and breathability of the membranes was assessed using WVTR measurements. To assess their robustness, chemical exposure ( in situ diffuse reflectance infrared Fourier transform spectroscopy) and mechanical (tensile strength) measurements were also performed. It was demonstrated that the barrier performance of the film upon inclusion of the LRD platelets exceeds that of other MOF-polymer composites found in the literature and that this approach establishes a new path for improving permselective materials for chemical protection applications.

Sulfur mustard is one of the most toxic chemical warfare agents worldwide. We report the use of 4,4-difluoro-4-bora-3a,4a-diaza- s-indacene (BODIPY) photosensitizers as a fast and effective sulfur mustard decontaminant and their incorporation into various polymer coatings and fabrics, including army combat uniform. These BODIPY-embedded materials are capable of generating singlet oxygen under visible light irradiation and effectively detoxifying sulfur mustard by converting it into nontoxic sulfoxides as the major products. The rate of decontamination is found to be affected by the photosensitizer structure and concentration as well as the excitation wavelength. The most effective BODIPY-embedded self-decontamination material observed in this study shows a half-life of only 0.8 min. In comparison to the current methods, which use activated carbon as the adsorbent layer, these self-detoxifying coatings and fabrics provide constant destruction of and real-time protection against sulfur mustard.

Copper sulfide (Cu(2-x)S) nanocrystals with nonstoichiometric composition exhibit plasmon resonance in the near-infrared region. Compositional changes and varying electron density markedly affect the position and intensity of the plasmon resonance. We report a photochemically induced phenomenon of modulating the plasmon resonance in a controlled fashion. As photogenerated reduced methyl viologen radicals transfer electrons to Cu(2-x)S in inert solutions, we observe a decrease in localized surface plasmon resonance (LSPR) absorbance at 1160 nm. Upon exposure to air, the plasmon resonance band recovers as stored electrons are scavenged away by oxygen. This cycle of electron charge and discharge of Cu(2-x)S nanocrystals is reversible and can be repeated through photoirradiation in N2 saturated solution followed by exposure of the suspension to air. The spectroscopic studies that provide mechanistic insights into the reversible charging and discharging of plasmonic Cu(2-x)S are discussed.

Smart material nanoassemblies that can simultaneously sense and shoot low-level contaminants from air and water are important for overcoming the threat of hazardous chemicals. Graphene oxide (GO) sheets deposited on mesoscopic TiO2 films that underpin the deposition of Ag nanoparticles with UV irradiation provide the foundation for the design of a smart material. The Ag particle size is readily controlled through precursor concentration and UV irradiation time. These semiconductor–graphene oxide–metal (SGM) films are SERS-active and hence capable of sensing aromatic contaminants such as 4-nitrobenzenethiol (4-NBT) in nanomolar range. Increased local concentration of organic molecules achieved through interaction with 2-D carbon support (GO) facilitates low-level detection of contaminants. Upon UV irradiation of 4-NBT-loaded SGM film, one can induce photocatalytic transformations. Thus, each component of the SGM film plays a pivotal role in aiding the detection and degradation of a contaminant dispersed in aqueous solutions. The advantage of using SGM films as multipurpose “detect and destroy” systems for nitroaromatic molecules is discussed.

Using alizarin and titanium isopropoxide, we have succeeded in preparing a hybrid form of nanostructured graphene-TiO2 following a bottom-up synthetic approach. This novel graphene-based composite offers a practical alternative to synthesizing photocatalytically active materials with maximized graphene-TiO2 interface. The molecular precursor alizarin was chosen because it efficiently binds to TiO2 through the hydroxyl groups and already possesses the graphene building block through its anthracene basis. XPS and Raman spectroscopy proved that the calcined material contained majority sp(2)-hybridized carbon that formed graphene-like clusters. XRD data showed the integrated structures maintained their anatase crystallography, therefore preserving the material's properties without going through phase transitions to rutile. The enhanced graphene and TiO2 interface was confirmed using DFT computational techniques. The photocatalytic activity of the graphene-TiO2 materials was demonstrated through degradation of methylene blue.

Adsorption equilibria and NMR experiments were performed to study the adsorption and interactions of ammonia with metal-organic framework (MOF) HKUST-1, or Cu(3)(BTC)(2) (BTC = 1,3,5-benzenetricarboxylate). Ammonia capacities determined from chemical breakthrough measurements show significantly higher uptake capacities than from adsorption alone, suggesting a stronger interaction involving a potential reaction with the Cu(3)(BTC)(2) framework. Indeed, (1)H MAS NMR reveals that a major disruption of the relatively simple spectrum of Cu(3)(BTC)(2) occurs to generate a composite spectrum consistent with Cu(OH)(2) and (NH(4))(3)BTC species under humid conditions-the anticipated products of a copper(II) carboxylate reacted with limited ammonia. These species are not detected under dry conditions; however, reaction stoichiometry combined with XRD results suggests the partial formation of an indeterminate diammine copper (II) complex with some residual Cu(3)(BTC)(2) structure retained. Cu(II)-induced paramagnetic shifts exhibited by various species in (1)H and (13)C MAS NMR spectra are consistent with model compounds and previous literature. Although results show extensive ammonia capacity of Cu(3)(BTC)(2), much of the capacity is due to reaction with the structure itself, causing a permanent loss in porosity and structural integrity.