Search

Vector-analyzing powers, A(x) and A(y), of the proton-deuteron break-up reaction have been measured by using a polarized-proton beam at 135 MeV impinging on a liquid-deuterium target. For the experiment, the big instrument for nuclear-polarization analysis (BINA) was used at KVI, Groningen, the Netherlands. The data are compared to the predictions of Faddeev calculations using state-of-the-art two- and three-nucleon potentials. Our data are reasonably well described by calculations for the kinematical configurations at which the three-nucleon force (3NF) effect is predicted to be small. However, striking discrepancies are observed at specific configurations, in particular in the cases of symmetric configurations, where the relative azimuthal angle between the two protons is small which corresponds to the d((p) over right arrow, He-2)n channel. The vector-analyzing powers of these configurations are compared to the proton-deuteron elastic scattering to study the spin-isospin sensitivity of the 3NFmodels. The results are compared to the earlier results of the proton-deuteron break-up reaction at 190 MeV protonbeam energy [1]. Disagreement is observed for both protonbeam energies between data and calculations which points to a deficiency in the treatment of spin-isospin part of the 3NF.

The digitalization of the process for building permit (involving the use of 3D information systems) is seen as a priority in a wide part of the world. Since it is a very multidisciplinary use case, involving a variety of stakeholders tackling complex issues and topics, some of them joined their efforts and skills in the European Network for Digital Building Permit. The initial activity of the network, after a review of on-going experiences, was a workshop to share knowledge about the topics involved and to identify the main ambitions of the network with respect to three pillars (i.e. Process – Rules and Requirements – Technology) and the related requirements. It was achieved through a collective brainstorming activity guided by digital tools, whose results were further analysed in a post-processing phase. Such results are presented in this paper and will be the base for planning the future network activity.

A measurement of the analyzing powers for the \(^{2}\mathrm{H}(\mathbf {p},pp)n\) break-up reaction was carried out at KVI exploiting a polarized-proton beam at 135 MeV. The results are compared with theoretical calculations. The theoretical calculations describe the main features of the measured distributions, but none of them can reproduce the details. This indicates the need for further development of the three-nucleon force (3NF) models.

The concepts of three-dimensional (3D) real property have been the subject of increased interest in land use management and research since the late ‘90s. Literature provides various examples of extensive research towards 3D Cadastres as well as those that are already implementing 3D cadastral systems. However, in most countries the legal aspects of 3D real property and its incorporation into 3D cadastral systems have not been so rigorously examined. This paper compares and discusses 3D property concepts in 15 cadastral jurisdictions, based on the authors’ national experience, covering Europe, North and Latin America, Middle East and Australia. Each of the legal system in these cadastral jurisdiction are based on different origins of Civil Law, including German, Napoleonic and Scandinavian Civil Law, which can prove useful to research in other Civil Law jurisdictions interested in introducing 3D cadastral systems. These jurisdictions are at different stages of introducing and implementing a 3D cadastral system. This contributes to the detection of the 3D real property concepts that apply as well as deficiencies that prohibit introduction of 3D cadastral systems, while highlighting challenges that may have not yet surfaced in individual jurisdictions. This paper aims to present the different legal concepts regarding 3D real property in the examined countries, focusing on the characteristic features of cadastral objects described as 3D within each country’s legal and cadastral framework. The analysis of the case studies revealed that the countries are on different stages of 3D Cadastral implementation, starting from countries with operational 3D cadastral systems, to others where there is yet no interest in introducing a 3D cadastral system. This paper presents the nature of 3D cadastral objects in each country, as well as differences in the regulatory framework regarding definition, description and registration. The paper continues the legal workshop discussions of the 4th International Workshop on 3D Cadastres in Dubai 2014 by analysing the legal concepts of 3D cadastres in the above-mentioned countries. The outcome is an overview and discussion of existing concepts of 3D property describing their similarities and differences in use, focusing on the legal framework of 3D cadastres. The article concludes by presenting a possible way forward and identifies what further research is needed which can be used to draft national and international research proposals and form legislative amendments towards introduction of national 3D cadastral systems.

Road traffic and industrial noise has become a major source of discomfort and annoyance among the residents in urban areas. More than 44 % of the EU population is regularly exposed to road traffic noise levels over 55 dB, which is currently the maximum accepted value prescribed by the Environmental Noise Directive for road traffic noise. With continuously increasing population and number of motor vehicles and industries, it is very unlikely to hope for noise levels to diminish in the near future. Therefore, it is necessary to monitor urban noise, so as to make mitigation plans and to deal with its adverse effects. The 2002/49/EC Environmental Noise Directive aims to determine the exposure of an individual to environmental noise through noise mapping. One of the most important steps in noise mapping is the creation of input data for simulation. At present, it is done semi-automatically (and sometimes even manually) by different companies in different ways and is very time consuming and can lead to errors in the data. In this paper, we present our approach for automatically creating input data for noise simulations. Secondly, we focus on using 3D city models for presenting the results of simulation for the noise arising from road traffic and industrial activities in urban areas. We implemented a few noise modelling standards for industrial and road traffic noise in CityGML by extending the existing Noise ADE with new objects and attributes. This research is a steping stone in the direction of standardising the input and output data for noise studies and for reconstructing the 3D data accordingly.

Building datasets (e.g. footprints in OpenStreetMap and 3D city models) are becoming increasingly available worldwide. However, the thematic (attribute) aspect is not always given attention, as many of such datasets are lacking in completeness of attributes. A prominent attribute of buildings is the year of construction, which is useful for some applications, but its availability may be scarce. This paper explores the potential of estimating the year of construction (or age) of buildings from other attributes using random forest regression. The developed method has a two-fold benefit: enriching datasets and quality control (verification of existing attributes). Experiments are carried out on a semantically rich LOD1 dataset of Rotterdam in the Netherlands using 9 attributes. The results are mixed: the accuracy in the estimation of building age depends on the available information used in the regression model. In the best scenario we have achieved predictions with an RMSE of 11 years, but in more realistic situations with limited knowledge about buildings the error is much larger (RMSE = 26 years). Hence the main conclusion of the paper is that inferring building age with 3D city models is possible to a certain extent because it reveals the approximate period of construction, but precise estimations remain a difficult task.

A measurement of the analyzing powers for the H-2((p) over right arrow ,pp)n break-up reaction was carried out at KVI exploiting a polarized-proton beam at 135 MeV. In this work, we extended the earlier measurements that were done for kinematical configurations at small proton scattering angles to large angles. The results are compared with theoretical calculations based on a two-nucleon (NN) potential alone or combined with a three-nucleon (3N) potential. The theoretical calculations describe the main features of the measured distributions, but none of them can reproduce the details. This indicates the need for further development of the 3N force models.

In this contribution, vector analyzing powers, A(x) and A(y), are presented for the proton-deuteron break-up reaction studied using a polarised-proton beam at 135 MeV impinging on a liquid-deuterium target. For the experiment we used the Big Instrument for Nuclear-polarisation Analysis (BINA) at KVI, the Netherlands. With this setup, we expanded our measurements of analyzing powers compared to earlier published result (Kalantar-Nayestanaki N. et al., Rep. Prog. Phys. 75 (2012)). In particular, we determined, for the first time, A(x) for a large range in the kinematical S, polar and azimuthal angles of the two outgoing protons. Analyzing power data are compared to predictions from Faddeev calculations. Our data are reasonably well described by calculations for kinematical configurations at which the three-nucleon force effect is predicted to be small. However, striking discrepancies are observed at specific configurations, in particular in cases where the relative azimuthal angle between the two protons becomes small. In this contribution, some of these configurations along with the analysis techniques will be presented.

Processes and transactions in Land Administration are outside the scope of the Land Administration Domain Model Edition I published in 2012. Reason is that processes were considered to be country specific. Generic processes would be too difficult to model. This view needs reconsideration – given developments as Fit-For-Purpose Land Administration, Apps and blockchain. In many countries different organizations have their own responsibilities in data maintenance and supply, but may communicate on the basis of standardised administrative and technical update processes. Operationalisation and implementation of LADM requires attention to this aspect - at least at conceptual level (not prescriptive). This will an issue in the development of LADM Edition II and this is the issue that is explored in this paper.

This paper presents the first and incomplete draft text for the revision of IS 19152:2012 ‘Geographic information — Land Administration Domai n Model (LADM)’ within ISO TC211 in the form of a New Working Item Proposal (N WIP). This ‘two-page NWIP’ text aims to describe the scope of proposed project to r evise, and also provides the purpose and justification behind this revision of LADM. The Int ernational Federation of Surveyors (FIG) also submitted to ISO the NWIP for the current vers ion of LADM (IS 19152:2012). As for the revision the ambition is now to go beyond just a co nceptual model by providing steps towards implementations (e.g. more specific profiles, techn ical model in various encodings, etc.), it is the intention that the Open Geospatial Consortium, Inc. (OGC) is heavily involved in the revision and that the result is a joint ISO/OGC sta ndard. For this purpose the recent draft OGC White Paper is added as Appendix 1 to this pape r to provide more detail background information. It is further noted that the complete NWIP for Edit ion II of LADM also ‘Preparatory work’ should be attached; e.g. a draft of the new version of the standard. In the case of the revised LADM standard of course this is based on the IS 191 52:2012, but will contain also contain collected materials from the LADM2017 and LADM2018 workshop.

Standardization in land administration domain has been expanded to 3D and even 4D representations, adopting a multipurpose character, in order to become the foundation of a sustainable and smart economic development. At the moment, although the potential benefits of 3D Cadastre is argued to be enormous and there are plenty of standards related to 3D Cadastre while others enhancing the role of 3D Cities, there is no complete solution for 3D Cadastre. That being so, the last years, there has been a rapid increase in the integration, harmonization and implementation support of such standards. In this context, the integration of 3D legal spaces with 3D physical objects is gaining ground, as the (invisible) legal boundaries do not always match with the physical counterparts, leading to obscure situations. LADM, the International Standard for land administration, was proved to be one of the best candidates to unambiguously represent 3D Rights, Restrictions and Responsibilities. On the other side, spatial data models and virtual city models manage 3D urban structures without focusing on legal aspects. Many researchers have explored integrations between those aspects giving promising results. In this direction, apart from international standards, also national standards have been developed to enable the communication between land information systems. One of the most representatives is INTERLIS, a Swiss standard, a precise, standardized Object Relational modelling language on the conceptual level, which allows for automated quality control. Thus, in this paper the focus is given on how INTERLIS and LADM complement each other in the actual implementation of land administration systems. Main challenges among others in the context of this research include: 1. extensible hierarchical and versioned code lists in INTERLIS models, 2. formally define LADM constraints in INTERLIS, 3. discuss 3D geometry types and 4. introduce a holistic LADM/INTERLIS approach for country profiles.