Search

Blink-related oscillations (BRO) are newly discovered neurophysiological phenomena associated with spontaneous blinking and represent cascading neural mechanisms including visual sensory, episodic memory, and information processing responses. These phenomena have been shown to be present at rest and during tasks and are modulated by cognitive load, creating the possibility for brain function assessments that can be integrated seamlessly into real-world settings. Prior works have largely examined the BRO phenomenon within controlled laboratory environments using magnetoencephalography and high-density electroencephalography (EEG) that are ill-suited for real-world deployment. Investigating BROs using low-density EEG within complex environments reflective of the real-world would further our understanding of how BRO responses can be utilized in real-world settings. We evaluated whether the BRO response could be captured in a high-fidelity flight simulation environment using a portable, low-density wireless EEG system. The effects of age and task demands on BRO responses were also examined. EEG data from 30 licensed pilots (age 43.37 +/- 17.86, 2 females) were collected during simulated flights at two cognitive workload levels. Comparisons of signal amplitudes were undertaken to confirm the presence of BRO responses and mixed model ANOVAs quantified the effects of workload and age group on BRO amplitudes. Significant increases in neural activity were observed post-blink compared to the baseline period ( p  < 0.05), confirming the presence of BRO responses. In line with prior studies, results showed BRO time-domain responses from the delta band (0.5-4 Hz) consisting of an early negative peak followed by a positive peak post-blink in temporal and parietal electrodes. Additionally, task workload and age-related effects were also found, with observations of the enhancement of BRO amplitudes with older age and attenuation of BRO responses in high workloads ( p  < 0.05). These findings demonstrate that it is possible to capture BRO responses within simulated flight environments using portable, low-cost, easy-to-use EEG systems. Furthermore, biological and task salience were reflected in these BRO responses. The successful detection and demonstration of both task-and age-related modulation of BRO responses in this study open the possibility of assessing human brain function across the lifespan with BRO responses in complex and realistic environments., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2024 Ziccardi, Van Benthem, Liu, Herdman and Ghosh Hajra.)

The gallium ion beam heating on electron transparent transmission electron microscopy (TEM) samples of Au/Ni bilayer films supported by SiO 2 substrates was studied by in-situ TEM combined with energy dispersive X-ray spectroscopy. Brief Ga + ion beam irradiation during sample transfer inside the focused ion beam instrument was found to induce dewetting of bilayer films. The observed morphological changes of the metal films are complemented by considerable Au diffusion through the underlying polycrystalline Ni film and adsorption at the Ni/substrate interface. In-situ heating experiments confirm that alterations of the metal bilayer films caused by ion beam irradiation are consistent with thermal annealing at 400 °C for several minutes in the absence of any ion bombardment. Ion beam damage effects equivalent to prolonged heating may pose considerable limitations to ion beam microscopy of samples with reduced dimensions. Ex-situ lift-out procedures of electron transparent samples in the absence of any ion beam irradiation lead to successful conservation of sample morphologies., (Copyright © 2017 Elsevier B.V. All rights reserved.)

The reduction reactions and densification of nanochains assembled from γ -Fe 2 O 3 nanoparticles were investigated using in situ transmission electron microscopy (TEM). Morphological changes and reduction of the metal oxide nanochains were observed during in situ TEM annealing through simultaneous imaging and quantitative analysis of the near-edge fine structures of Fe L 2,3 absorption edges acquired by spatially resolved electron energy loss spectroscopy. A change in the oxidation states during annealing of the iron oxide nanochains was observed with phase transformations due to continuous reduction from Fe 2 O 3 over Fe 3 O 4 , FeO to metallic Fe. Phase transitions during the in situ heating experiments were accompanied with morphological changes in the nanochains, specifically rough-to-smooth surface transitions below 500 °C, neck formation between adjacent particles around 500 °C, and subsequent neck growth. At higher temperatures, coalescence of FeO particles was observed, representing densification.

The solid state dewetting of Au/Ni bilayer films was investigated by cross-sectional transmission electron microscopy techniques, including energy-dispersive X-ray spectroscopy, electron energy-loss spectroscopy and precession electron diffraction. After annealing under high vacuum conditions the early stage of film agglomeration revealed significant changes in film morphology and chemical distribution. Both Au and Ni showed texturing. Despite the initial deposition sequence of the as-deposited Au/Ni/SiO 2 /Si interface structure, the majority of the metal/SiO 2 interface was Au/SiO 2 after annealing at 675°C for 1h. Void nucleation was predominantly observed at Au/Ni/SiO 2 triple junctions, rather than grain boundary grooving at free surface of the metal film. Detailed cross-sectional characterization reveals that the Au/Ni interface in addition to small amounts of metal alloying strongly affects film break-up and agglomeration kinetics. The formation of Au/SiO 2 interface sections is found to be energetically preferred over Ni/SiO 2 due to compressive stress in the as-deposited Ni layer. Void nucleation is observed at the film/substrate interface, while the formation of voids at Ni/Au phase boundaries inside the metal film is caused by the Kirkendall effect., (Copyright © 2016 Elsevier B.V. All rights reserved.)

A spark plasma sintering apparatus was used as a novel method for diffusion bonding of two single crystals of strontium titanate to form bicrystals with one twist grain boundary. This apparatus utilizes high uniaxial pressure and a pulsed direct current for rapid consolidation of material. Diffusion bonding of strontium titanate bicrystals without fracture, in a spark plasma sintering apparatus, is possible at high pressures due to the unusual temperature dependent plasticity behavior of strontium titanate. We demonstrate a method for the successful formation of bicrystals at accelerated time scales and lower temperatures in a spark plasma sintering apparatus compared to bicrystals formed by conventional diffusion bonding parameters. Bond quality was verified by scanning electron microscopy. A clean and atomically abrupt interface containing no secondary phases was observed using transmission electron microscopy techniques. Local changes in bonding across the boundary was characterized by simultaneous scanning transmission electron microscopy and spatially resolved electron energy-loss spectroscopy.

The scanning electron microscope provides a platform for subnanometer resolution characterization of material morphology with excellent topographic and chemical contrast dependent on the used detectors. For imaging applications, the predominantly utilized signals are secondary electrons (SEs) and backscattered electrons (BSEs) that are emitted from the sample surface. Recent advances in detector technology beyond the traditional Everhart-Thornley geometry have enabled the simultaneous acquisition and discrimination of SE and BSE signals. This study demonstrates the imaging capabilities of a recently introduced new detector system that consists of the combination of two in-lens (I-L) detectors and one in-column (I-C) detector. Coupled with biasing the sample stage to reduce electron-specimen interaction volumes, this trinity of detector geometry allows simultaneous acquisition of signals to distinguish chemical contrast from topographical changes of the sample, including the identification of surface contamination. The I-C detector provides 4× improved topography, whereas the I-L detector closest to the sample offers excellent simultaneous chemical contrast imaging while not limiting the minimization of working distance to obtain optimal lateral resolution. Imaging capabilities and contrast mechanisms for all three detectors are discussed quantitatively in direct comparison to each other and the conventional Everhart-Thornley detector.

Herein we report the electroless deposition of Ge onto sacrificial Ag nanoparticle (NP) templates to form hollow Ge NPs. The formation of AgI is a necessary component for this reaction. Through a systematic study of surface passivating ligands, we determined that tri-n-octylphosphine is necessary to facilitate the formation of hollow Ge NPs by acting as a transport agent for GeI2 and the oxidized Ag(+) cation (i.e., AgI product). Annular dark-field (ADF) scanning transmission electron microscopy (STEM) imaging of incomplete reactions revealed Ag/Ge core/shell NPs; in contrast, completed reactions displayed hollow Ge NPs with pinholes which is consistent with the known method for dissolution of the nanotemplate. Characterization of the hollow Ge NPs was performed by transmission electron microscopy, ADF-STEM, energy-dispersive X-ray spectroscopy, UV-vis spectrophotometry, and Raman spectroscopy. The galvanic replacement reaction of Ag with GeI2 offers a versatile method for controlling the structure of Ge nanomaterials.

Obliteration of matter by pulsed laser beams is not only prevalent in science fiction movies, but finds numerous technological applications ranging from additive manufacturing over machining of micro- and nanostructured features to health care. Pulse lengths ranging from femtoseconds to nanoseconds are utilized at varying laser beam energies and pulse lengths, and enable the removal of nanometric volumes of material. While the mechanisms for removal of material by laser irradiation, i.e., laser ablation, are well understood on the micrometer length scale, it was previously impossible to directly observe obliteration processes on smaller scales due to experimental limitations for the combination of nanometer spatial and nanosecond temporal resolution. Here, we report the direct observation of metal thin film ablation from a solid substrate through dynamic transmission electron microscopy. Quantitative analysis reveals liquid-phase dewetting of the thin-film, followed by hydrodynamic sputtering of nano- to submicron sized metal droplets. We discovered unexpected fracturing of the substrate due to evolving thermal stresses. This study confirms that hydrodynamic sputtering remains a valid mechanism for droplet expulsion on the nanoscale, while irradiation induced stress fields represent limit laser processing of nanostructured materials. Our results allow for improved safety during laser ablation in manufacturing and medical applications.

Electric field-assisted sintering techniques demonstrate accelerated densification at lower temperatures than the conventional sintering methods. However, it is still debated whether the applied field and/or resulting currents are responsible for the densification enhancement. To distinguish the effects of an applied field from current flow, in situ scanning transmission electron microscopy experiments with soft agglomerates of partially stabilized yttria-doped zirconia particles are carried out. A new microelectromechanical system-based sample support is used to heat particle agglomerates while simultaneously exposing them to an externally applied noncontacting electric field. Under isothermal condition at 900 °C, an electric field strength of 500 V/cm shows a sudden threefold enhancement in the shrinkage of the agglomerates. The applied electrostatic potential lowers the activation energy for point defect formation within the space charge zone and therefore promotes consolidation. Obtaining similar magnitudes of shrinkage in the absence of any electric field requires a higher temperature and longer time.

Studying particle-agglomerate systems compared to two-particle systems elucidates different stages of sintering by monitoring both pores and particles. We report on in situ sintering of 3% yttria-stablized zirconia particle agglomerates in the transmission electron microscope (TEM). Real-time TEM observations indicate neck formation and growth, particle coalescence and pore closure. A MATLAB-based image processing tool was developed to calculate the projected area of the agglomerate with and without internal pores during in situ sintering. We demonstrate the first densification curves generated from sequentially acquired TEM images. The in situ sintering onset temperature was then determined to be at 960 °C. Densification curves illustrated that the agglomerate projected area which excludes the internal observed pores also shrinks during in situ sintering. To overcome the common projection problem for TEM analyses, agglomerate mass-thickness maps were obtained from low energy-loss analysis combined with STEM imaging. The decrease in the projected area was directly related to the increase in mass-thickness of the agglomerate, likely caused by hidden pores existing in the direction of the beam. Access to shrinkage curves through in situ TEM analysis provides a new avenue to investigate fundamental mechanisms of sintering through directly correlating microstructural changes during consolidation with mesoscale densification behavior., (Copyright © 2014 Elsevier B.V. All rights reserved.)

The contamination of drinking water with naturally occurring arsenic is a global health threat. Filters that are packed with adsorbent media with a high affinity for arsenic have been used to de-contaminate water - generally iron or aluminium oxides are favored materials. Recently, nanoparticles have been introduced as adsorbent media due to their superior efficiency compared to their bulk counter-parts. An efficient nanoadsorbent should ideally possess high surface area, be easy to synthesize, and most importantly offer a high arsenic removal capacity. Achieving all the key features in a single step synthesis is an engineering challenge. We have successfully engineered such a material in the form of nanochains synthesized via a one step flame synthesis. The ultra-long γ-Fe 2 O 3 nanochains possess high surface area (151.12 m 2 g -1 ), large saturation magnetization (77.1 emu g -1 ) that aids in their gas phase self-assembly into long chains in an external magnetic field, along with an extraordinary arsenic removal capacity (162 mg.g -1 ). A filter made with this material exhibited a relatively low-pressure drop and very little break-through of the iron oxide across the filter.

Dewetting of ultra-thin Ni films deposited on SiO2 layers was observed, in cross-section, by in situ scanning transmission electron microscopy. Holes were observed to nucleate by voids which formed at the Ni/SiO2 interface rather than at triple junctions at the free surface of the Ni film. Ni islands were observed to retract, in attempt to reach equilibrium on the SiO2 layer. SiO2 layers with 120 nm thickness were found to limit in situ heating experiments due to poor thermal conductivity of SiO2. The formation of graphite was observed during the agglomeration of ultra-thin Ni films. Graphite was observed to wet both the free surface and the Ni/SiO2 interface of the Ni islands. Cr forms surface oxide layers on the free surface of the SiO2 layer and the Ni islands. Cr does not prevent the dewetting of Ni, however it will likely alter the equilibrium shape of the Ni islands., (© 2013 Published by Elsevier B.V.)

Background: Older driver safety is a growing concern. We identified capacity-building needs of occupational therapists related to older driver screening, assessment, and intervention., Method: A Canadawide survey was undertaken involving 133 occupational therapists working with an older clientele. A standardized questionnaire elicited information regarding (1) actual practices related to older driver screening, assessment, and intervention; (2) perceived competence; and (3) need for continuing education., Results: Occupational therapists were twice as likely to use screening tools rather than in-depth assessments (n = 79 vs. n = 37). Only 25 occupational therapists offered on-road assessment, and even fewer offered retraining (n = 11). Occupational therapists more often felt very competent in domains related to screening as opposed to assessment, and most were interested in continuing education., Conclusion: Driving services offered were primarily related to screening compared with assessment or intervention. Occupational therapists would benefit from driving-related professional training aimed at enhancing professional capacity in this arena.

The new possibilities of aberration-corrected scanning transmission electron microscopy (STEM) extend far beyond the factor of 2 or more in lateral resolution that was the original motivation. The smaller probe also gives enhanced single atom sensitivity, both for imaging and for spectroscopy, enabling light elements to be detected in a Z-contrast image and giving much improved phase contrast imaging using the bright field detector with pixel-by-pixel correlation with the Z-contrast image. Furthermore, the increased probe-forming aperture brings significant depth sensitivity and the possibility of optical sectioning to extract information in three dimensions. This paper reviews these recent advances with reference to several applications of relevance to energy, the origin of the low-temperature catalytic activity of nanophase Au, the nucleation and growth of semiconducting nanowires, and the origin of the eight orders of magnitude increased ionic conductivity in oxide superlattices. Possible future directions of aberration-corrected STEM for solving energy problems are outlined.

Problem and Objective: The number of older drivers who might benefit from driver retraining is growing. A previous review on the effectiveness of older driver retraining included intervention studies up to 2004. The objective was to perform an updated systematic review of the effectiveness of older driver retraining for improving driving-related skills and reducing crash rates., Method: Articles published from 2004-2008 were grouped according to the intervention provided and outcome studied. Randomized clinical trials (RCTs) were appraised using the Physiotherapy Evidence Database (PEDro) Scale and scored for quality according to their internal validity. Each intervention's effectiveness was then rated and assigned a level of evidence by combining pre- and post- 2004 findings., Results: Three RCTs and one matched-pairs cohort design met the inclusion criteria. There is strong evidence (Level 1a) that education combined with on-road training improves driving performance and moderate evidence (Level 1b) that it improves knowledge. There is moderate evidence (Level 1b) that physical retraining improves driving performance. There is moderate evidence (Level 1b) that an educational intervention curriculum alone is not effective in reducing crashes., Summary: The updated evidence on the effectiveness of retraining aimed at older drivers is sufficiently encouraging to merit assertive health promotion actions regarding intervention and program planning., Impact on Industry: These positive findings warrant a comprehensive plan that has both behavioral and monetary incentives encouraging older driver participation in programs aimed at driver safety.

Aberration-corrected scanning transmission electron microscopy (STEM) is used to reveal individual Au atom configurations inside Si nanowires grown by Au-catalyzed vapor-liquid-solid (VLS) molecular beam epitaxy (MBE). We identify a substitutional and three distinct interstitial configurations, one of which has not been previously identified. We confirm the stability of the observed point defect configurations by density functional theory (DFT) calculations. The observed number densities of the various configurations are in accord with their calculated formation energies. The concentration of Au atoms is larger than the solubility limit, but the effect may be caused by the STEM beam.

"Subsurfactant epitaxy" is established as a conceptually new approach for introducing manganese as a magnetic dopant into germanium. A kinetic pathway is devised in which the subsurface interstitial sites on Ge(100) are first selectively populated with Mn, while lateral diffusion and clustering on or underneath the surface are effectively suppressed. Subsequent Ge deposition as a capping layer produces a novel surfactantlike phenomenon as the interstitial Mn atoms float towards newly defined subsurface sites at the growth front. Furthermore, the Mn atoms that failed to float upwards are uniformly distributed within the Ge capping layer. The resulting doping levels of order 0.25 at. % would normally be considered too low for ferromagnetic ordering, but the Curie temperature exceeds room temperature by a comfortable margin. Subsurfactant epitaxy thus enables superior dopant control in magnetic semiconductors.

Recent and ongoing improvements in aberration correction have opened up the possibility of depth sectioning samples using the scanning transmission electron microscope in a fashion similar to the confocal scanning optical microscope. We explore questions of principle relating to image interpretability in the depth sectioning of samples using electron energy loss spectroscopy. We show that provided electron microscope probes are sufficiently fine and detector collection semi-angles are sufficiently large we can expect to locate dopant atoms inside a crystal. Furthermore, unlike high angle annular dark field imaging, electron energy loss spectroscopy can resolve dopants of smaller atomic mass than the supporting crystalline matrix.

Aberration correction in scanning transmission electron microscopy has more than doubled the lateral resolution, greatly improving the visibility of individual impurity or dopant atoms. Depth resolution is increased five-fold, to the nanometer level. We show how a through-focal series of images enables single Hf atoms to be located inside an advanced gate dielectric device structure to a precision of better than 0.1 x 0.1 x 0.5 nm. This depth sectioning method for three-dimensional characterization has potential applications to many other fields, including polycrystalline materials, catalysts and biological structures.

Quantitative analysis of spatially resolved valence electron energy-loss spectra shows strong physical property contrasts for Sigma5 and near Sigma13 grain boundaries in Fe-doped SrTiO3, resulting in London dispersion interaction energies of 14 to 50 mJ/m(2) between the adjacent grains. The determination of local physical properties of grain boundary cores and the appreciable contribution of long-range London dispersion to interface energies provides new information on formation and control of interfaces in materials.

Near-edge structures of absorption edges in electron energy-loss spectra (ELNES) of SrTiO(3) were calculated and compared to experimental inelastic electron scattering data. The goal of this study was to investigate final-state effects on the electronic structure. Two theoretical approaches were applied: density-functional theory with a band-structure supercell method and a real-space multiple-scattering cluster approach. Within both techniques, the Z+1 approximation was used to model the core hole generated by the inelastic scattering process. For the band-structure calculations, supercells of (SrTiO(3))(n)(n=1,4,8,16) composition with three-dimensional periodic boundary conditions were applied. The influence of supercell size and shape on calculated site- and symmetry-projected local densities of unoccupied states is assessed quantitatively. Relevant convergence criteria are the length scale set by the spatial extension of the valence-electron screening cloud around the core hole, and the interaction energy of neighbouring core hole centres. For a sufficiently large supercell size, the Z+1 approximation yields a reasonable description of the local densities of unoccupied states probed by the energy losses of inelastically scattered electrons of the Ti L(3)-, O K- and Sr L(3)-absorption edges. The quantitative equivalence of ELNES information extracted from the multiple-scattering cluster calculations and the band-structure supercell calculations is demonstrated. Discrepancies between theoretical and experimental results are discussed.

First results obtained with a Gatan UHV Enfina system, which was attached to a VG HB 501 UX dedicated STEM, are reported. The Enfina system is based on a CCD detector and offers, compared to the previously used photodiode array, a narrower point-spread function, higher sensitivity, and faster read-out capabilities. These improvements are demonstrated with electron energy-loss measurements on various oxides, such as Al2O3, TiO2 and SrTiO3. It is shown that a better energy resolution is achieved and that acquisition of high-energy absorption edges with a reasonable signal-to-noise ratio becomes possible. Furthermore, we report on the influence of the TEM specimen quality on the energy-loss spectra. Thin amorphous layers at the specimen surfaces, which are induced by ion-milling processes, can modify specific electron energy-loss near-edge structure features. We found that for the investigated ceramics the use of low-energy ion-milling systems is highly recommended, since the loss of energy-loss near-edge structure details by the presence of the amorphous layers is considerably reduced. This is especially true for very thin specimens.

Valence electron energy loss spectroscopy in a dedicated scanning transmission electron microscope has been used to obtain the interband transition strength of a sigma13 tilt grain boundary in SrTiO3. In a first step the electronic structure of bulk SrTiO3 has been analysed quantitatively by comparing VEELS spectra with vacuum ultraviolet spectra and with ab initio density of states calculations. The electronic structure of a near sigma13 grain boundary and the corresponding dispersion forces were then determined by spatially resolved VEELS. Also the effects of delocalization of the inelastic scattering processes were estimated and compared with results from the literature.