Search

MBenes are post‐MXene materials that contain boron in their structure instead of carbon and nitrogen. This unique composition offers an opportunity to explore the role of boron in the performance of 2D materials. However, wet‐chemical etching and delamination of the starting MoAlB phase are challenging due to the persistent bonding of aluminum atoms with their neighboring elements. Herein, it is overcome by processing MoAlB for 24, 48, and 72 h with an aqueous HCl/H2O2 solution. The time‐wise etching and delamination delivers individual single‐to‐few layered 48‐MBene flakes. The theoretical‐to‐experimental XRD analysis revealed the best‐delaminated 48‐MBene having Mo2B2 orthorhombic lattice arrangement. The presence of Mo oxide allows direct 1.2 eV and indirect 0.2 eV optical band gaps and outstanding photocatalytic activity in decomposing methylene blue as a model organic contaminant. The 48‐MBene photocatalyst achieves about 90% of MB decomposition under ultraviolet and simulated white light irradiation with three times faster kinetics outperforming even hybridized MXenes. In addition, 48‐MBene appeared best suited to utilize the full spectrum of visible light into reactive oxygen species. Conversely, 24‐MBene and 72‐MBene shows incomplete delamination or oxidation, hampering their photocatalytic activity. The obtained results open an experimental pathway to apply MBenes in environmental remediation. [ABSTRACT FROM AUTHOR]

Two‐dimensional MXenes are excellent photocatalysts. However, their low oxidation stability makes controlling photocatalytic processes challenging. For the first time, this work elucidates the influence of the oxidation stabilization of model 2D Ti3C2Tx MXene on its optical and photocatalytic properties. The delaminated MXene is synthesized via two well‐established approaches: hydrofluoric acid/tetramethylammonium hydroxide (TMAOH‐MXene) and minimum intensive layer delamination with hydrochloric acid/lithium fluoride (MILD‐MXene) and then stabilized by L‐ascorbic acid. Both MXenes at a minimal concentration of 32 mg L−1 show almost 100% effectiveness in the 180‐min photocatalytic decomposition of 25 mg L−1 model methylene blue and bromocresol green dyes. Industrial viability is achieved by decomposing a commercial textile dye having 100 times higher concentration than that of model dyes. In such conditions, MILD‐MXene is the most efficient due to less wide optical band gap than TMAOH‐MXene. The MILD‐MXene required only few seconds of UV light, simulated white light, or 500 nm (cyan) light irradiation to fully decompose the dye. The photocatalytic mechanism of action is associated with the interplay between surface dye adsorption and the reactive oxygen species generated by MXene under light irradiation. Importantly, both MXenes are successfully reused and retained approximately 70% of their activity. [ABSTRACT FROM AUTHOR]

Dyes are highly toxic and persistent in the environment. Their presence in water causes environmental and social problems. Dyes must be effectively removed from the water. A UV/ZVI/H2O2 process was applied to decompose two organic dyes, AM E123 and AM ACID. A commercial ZVI product, Ferox Flow, was used, and its properties were determined using SEM and XRF. The zeta potential, surface area, and optical properties of ZVI were also determined. The efficiency of dye removal in optimal conditions was 85.5% and 80.85% for AM E123 and AM ACID, respectively. Complete decolorization was observed in all samples. The decomposition of both dyes occurred according to a modified pseudo-second-order reaction and there was a statistically significant correlation between the TOC decrease, pH, and process time. The catalyst was observed to have high stability, and this was not affected by the performance of the treatment process even after the third cycle, as confirmed by the results of the catalyst surface analysis and iron diffusion test. Slight differences in process efficiency were observed after each cycle. The need for only a small amount of catalyst to decompose AM E123 and AM ACID, coupled with the ability to reuse the catalyst without the need for prior preparation, may reduce catalyst purchase costs. [ABSTRACT FROM AUTHOR]

Polypropylene (PP) is a thermoplastic polymer widely used as a medical textile in healthcare applications due to its low cost and superior performance. However, it does not show antibacterial properties leading to the possibility of pathogen transmission. Herein, we have developed an antibacterial medical fabric by facile self-assembly of delaminated two-dimensional (2D) Ti3C2Tx MXene flakes bristling on the surface of PP fibers. The increasing amount of MXene in the coating solution from 1 up to 32 mg/mL allowed for edge-on assembly of MXene flakes on the PP surface and tracking the evolution of the band gap for a restacked structure. Characterization of the PP/Ti3C2Tx nanocomposite has proven that it exhibited highly effective antibacterial, robust coating, and chemically/thermally stable properties. The in vitro microbiological studies against Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus have shown that PP/Ti3C2Tx reduced the bacterial viability up to 100%, as driven by synergistic membrane stress mediated by physical contact and light-induced reactive oxygen species (ROS) generation. Moreover, the use of l-ascorbic acid for MXene stabilization allowed for achieving excellent thermal stability of the PP/Ti3C2Tx nanocomposite upon accelerated thermal aging. Collectively, this work provides a facile surface engineering strategy for designing medical fabrics with outstanding functional performances. By demonstrating the exceptional performance of the stabilized MXene in a self-assembly nanocomposite structure, we are opening the door for MXenes to be applied in other biomedical fields. [ABSTRACT FROM AUTHOR]

Two-dimensional compounds with nanostructural features are attracting attention from researchers worldwide. Their multitude of applications in various fields and vast potential for future technology advancements are successively increasing the research progress. Wastewater treatment and preventing dangerous substances from entering the environment have become important aspects due to the increasing environmental awareness, and increasing consumer demands have resulted in the appearance of new, often nonbiodegradable compounds. In this review, we focus on using the most promising 2D materials, such as MXenes, Bi2WO6, and MOFs, as catalysts in the modification of the Fenton process to degrade nonbiodegradable compounds. We analyze the efficiency of the process, its toxicity, previous environmental applications, and the stability and reusability of the catalyst. We also discuss the catalyst's mechanisms of action. Collectively, this work provides insight into the possibility of implementing 2D material-based catalysts for industrial and urban wastewater treatment. [ABSTRACT FROM AUTHOR]

Due to the presence of multiple caves and rock shelters as well as flint outcrops, Ojców Upland is a region with an exceptionally high concentration of prehistoric human settlement traces. It has attracted archaeologists for over 150 years, leading to what was considered to have been a proper prospection of the area. Nonetheless, the analysis of airborne laser scanning has recently brought surprising results. In the very centre of the upland, on the densely forested hill 'Złota Góra' (Golden Hill), the remains of an exceptionally large defensive structure in the form of several rows of embankments were found. The use of magnetic methods made it possible to confirm their anthropogenic origin and the likely type of embankment construction. In turn, the layout of embankments combined with the results of a surface survey and the analyses of the acquired artefacts and the settlement context speak in favour of linking this defensive structure with a high degree of probability with the Neolithic or Eneolithic, most likely the Lengyel‐Polgár cycle or Baden culture. The presence of such a large fortification in the immediate vicinity of flint mines could shed new light on the image of the Late Neolithic‐Early/Middle Eneolithic period in this part of Europe. [ABSTRACT FROM AUTHOR]

2D transition metal borides (MBenes) have emerged as promising post‐MXene materials with potential application in various biotechnological fields. Although they possess prospective bioactive properties due to boron in their structure, the experience gained from MXenes shows that an in‐depth understanding of their biological recognition and response as well as the exploration of their biological applications are highly challenging. This makes the identification of the most promising 2D MBenes for future biological research and final industrial applications rather complicated. Herein, MBenes are differentiated from MXenes and further untangled for their bioactivity‐generating features. It is expected that MBenes' positive or negative biological impact on living organisms and different types of cells connect with their morphological, structural and physicochemical features in the context of relevant environments. Necessary toxicological data are also highlighted, which are key aspects to enable MBenes' safe application in biotechnology and nanomedicine. Furthermore, a perspective for the rational development and design of novel biotechnological solutions based on MBenes is provided, which will meet the legal safety requirements for nanomaterials. In this regard, this work is an unprecedented contribution toward strategies for regulatory development for MBene/MXene‐type nanomaterials. It provides an inspiration for future biotechnological and nanotoxicological approaches using MBenes. [ABSTRACT FROM AUTHOR]

Copyright of Acta Archaeologica Lodziensia is the property of Lodz Scientific Society / Lodzkie Towarzystwo Naukowe and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

In this work, NiTi alloy parts were fabricated using laser powder bed fusion (LBPF) from pre-alloyed NiTi powder and in situ alloyed pure Ni and Ti powders. Comparative research on the corrosive and biological properties of both studied materials was performed. Electrochemical corrosion tests were carried out in phosphate buffered saline at 37 °C, and the degradation rate of the materials was described based on Ni ion release measurements. Cytotoxicity, bacterial growth, and adhesion to the surface of the fabricated coupons were evaluated using L929 cells and spherical Escherichia coli (E. coli) bacteria, respectively. The in situ alloyed NiTi parts exhibit slightly lower corrosion resistance in phosphate buffered saline solution than pre-alloyed NiTi. Moreover, the passive layer formed on in situ alloyed NiTi is weaker than the one formed on the NiTi fabricated from pre-alloyed NiTi powder. Furthermore, in situ alloyed NiTi and NiTi made from pre-alloyed powders have comparable cytotoxicity and biological properties. Overall, the research has shown that nitinol sintered using in situ alloyed pure Ni and Ti is potentially useful for biomedical applications. [ABSTRACT FROM AUTHOR]

Point-of-use (POU) water treatment systems and devices play an essential role in limited access to sanitary safe water resources. The filtering materials applied in POU systems must effectively eliminate contaminants, be readily produced and stable, and avoid secondary contamination of the treated water. We report an innovative, 2D Ti3C2/Al2O3/Ag/Cu nanocomposite-modified filtration material with the application potential for POU water treatment. The material is characterized by improved filtration velocity relative to an unmodified reference material, effective elimination of microorganisms, and self-disinfecting potential, which afforded the collection of 99.6% of bacteria in the filter. The effect was obtained with nanocomposite levels as low as 1%. Surface oxidation of the modified material increased its antimicrobial efficiency. No secondary release of the nanocomposites into the filtrate was observed and confirmed the stability of the material and its suitability for practical application in water treatment. [ABSTRACT FROM AUTHOR]

[Display omitted] A broad family of two-dimensional (2D) materials - carbides, nitrides, and carbonitrides of early transition metals, called MXenes, became a newcomer in the flatland at the turn of 2010 and 2011 (over ten years ago). Their unique physicochemical properties made them attractive for many applications, highly boosting the development of various fields, including biotechnological. However, MXenes' functional features that impact their bioactivity and toxicity are still not fully well understood. This study discusses the essentials for MXenes's surface modifications toward their application in modern biotechnology and nanomedicine. We survey modification strategies in context of cytotoxicity, biocompatibility, and most prospective applications ready to implement in medical practice. We put the discussion on the material-structure-chemistry-property relationship into perspective and concentrate on overarching challenges regarding incorporating MXenes into nanostructured organic/inorganic bioactive architectures. It is another emerging group of materials that are interesting from the biomedical point of view as well. Finally, we present an influential outlook on the growing demand for future research in this field. [ABSTRACT FROM AUTHOR]

Developing efficient antibacterial nanomaterials has potential across diverse fields, but it requires a deeper understanding of material-bacteria interactions. In this study, a novel 2D core-shell MoAlB@MBene structure is synthesized using a mild wet-chemical etching approach. The growth of E. coli, S. aureus, and B. subtilis bacteria in the presence of MoAlB@MBene decreased in a concentration-dependent manner, with a prolonged lag phase in the initial 6 h of incubation. Even under dark conditions, MoAlB@MBene triggered the formation of intercellular reactive oxygen species (ROS) and singlet oxygen ( 1 O 2 ) in bacteria, while the bacteria protected themselves by forming biofilm and altering cell morphology. The MoAlB@MBene shows consistent light absorption across the visible range, along with a distinctive UV absorption edge. Two types of band gaps are identified: direct (1.67 eV) and indirect (0.74 eV), which facilitate complex light interactions with MoAlB@MBene. Exposure to simulated white light led to decreased viability rates of E. coli (20.6%), S. aureus (22.9%), and B. subtilis (21.4%). Altogether, the presented study enhances the understanding of bacteria responses in the presence of light-activated 2D nanomaterials., (© 2024 Wiley‐VCH GmbH.)

Two-dimensional MXenes are excellent photocatalysts. However, their low oxidation stability makes controlling photocatalytic processes challenging. For the first time, this work elucidates the influence of the oxidation stabilization of model 2D Ti 3 C 2 T x MXene on its optical and photocatalytic properties. The delaminated MXene is synthesized via two well-established approaches: hydrofluoric acid/tetramethylammonium hydroxide (TMAOH-MXene) and minimum intensive layer delamination with hydrochloric acid/lithium fluoride (MILD-MXene) and then stabilized by L-ascorbic acid. Both MXenes at a minimal concentration of 32 mg L -1 show almost 100% effectiveness in the 180-min photocatalytic decomposition of 25 mg L -1 model methylene blue and bromocresol green dyes. Industrial viability is achieved by decomposing a commercial textile dye having 100 times higher concentration than that of model dyes. In such conditions, MILD-MXene is the most efficient due to less wide optical band gap than TMAOH-MXene. The MILD-MXene required only few seconds of UV light, simulated white light, or 500 nm (cyan) light irradiation to fully decompose the dye. The photocatalytic mechanism of action is associated with the interplay between surface dye adsorption and the reactive oxygen species generated by MXene under light irradiation. Importantly, both MXenes are successfully reused and retained approximately 70% of their activity., (© 2023 Wiley-VCH GmbH.)

Graphene-based nanocomposites constitute an interesting and promising material for various applications. Intensive progress in the development of this group of materials offers an opportunity to create new systems useful for drinking water decontamination or other biotechnological applications. Nanohybrid structures of graphene-ceramic systems can be obtained using covalent graphene surface modification with nanoparticles (NPs) of ceramic and/or co-deposition of metals with selected morphology and chemistry. The present paper systematizes the associated bio-related knowledge and inspires future development of graphene/NPs systems. Emerging knowledge and unique research techniques are reviewed within designing the required nanocomposite structure and chemical composition, development and optimization of new methods of covalent surface modification of graphene with NPs as well as analysis of mechanisms governing the formation of covalent bonding. Further, innovative research tools and methodologies are presented regarding the adjustment of functionalities of materials used for the application in drinking water decontamination or biocidal composites. This study provides a comprehensive base for rational development of more complex, hybrid graphene-based nanomaterials with various bio-functionalities that can be further applied in industrial practice., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2021 Jakubczak and Jastrzębska.)