Search

This paper describes the active optics system of the VLT Survey Telescope, the 2.6-m survey telescope designed for visible wavelengths of the European Southern Observatory at Cerro Paranal, in the Atacama desert. The telescope is characterized by a wide field of view (1.42 deg diameter), leading to tighter active optics than in conventional telescopes, in particular for the alignment requirements. We discuss the effects of typical error sources on the image quality and present the specific solutions adopted for wavefront sensing and correction of the aberrations, which are based on the shaping of a monolithic primary mirror and the positioning of the secondary in five degrees of freedom.

The VLT survey telescope is the latest telescope installed at European Southern Observatory's Paranal observatory that is considered one of the best sites for optical astronomy for the excellent seeing conditions. The exceptional quality of the site imposes tight requirements for the telescope tracking system that shall perform very well to fully exploit the extreme sharpness of the Chilean sky. We describe the specific solutions adopted for pointing, servo and guiding systems and the results obtained during the commissioning of the telescope. The hardware implementation relies on industry components and the control solutions privilege both the performance and the future maintainability of the system.

The wavefront sensor in active and adaptive telescopes is usually not in the optical path toward the scientific detector. It may generate additional wavefront aberrations, which have to be separated from the errors due to the telescope optics. The aberrations that are not rotationally symmetric can be disentangled from the telescope aberrations by a series of measurements taken in the center of the field, with the wavefront sensor at different orientation angles with respect to the focal plane. This method has been applied at the VLT Survey Telescope on the ESO Paranal observatory.

The Layer-Oriented Simulation Tool (LOST) is a numerical simulation code developed for analysis of the performance of multiconjugate adaptive optics modules following a layer-oriented approach. The LOST code computes the atmospheric layers in terms of phase screens and then propagates the phase delays introduced in the natural guide stars' wave fronts by using geometrical optics approximations. These wave fronts are combined in an optical or numerical way, including the effects of wave-front sensors on measurements in terms of phase noise. The LOST code is described, and two applications to layer-oriented modules are briefly presented. We have focus on the Multiconjugate adaptive optics demonstrator to be mounted upon the Very Large Telescope and on the Near-IR-Visible Adaptive Interferometer for Astronomy (NIRVANA) interferometric system to be installed on the combined focus of the Large Binocular Telescope.

Because of the finite speed of light, a laser guide Star that is seen from the side is not exactly a straight line. When such a laser guide star is used to sense tip-tilt with some of the perspective-based techniques that are used to retrieve an absolute tip-tilt laser, such nonstraightness introduces an error. We estimate this effect for various diameters of a laser projector, assuming a Kolmogorov turbulence spectrum and figuring the maximum achievable Strehl ratio. We found that under poor seeing conditions the effect is not negligible and that laser projectors larger than those currently used are required.