Search

To reach fusion conditions and control the plasma configuration in ITER, the next step in tokamak fusion research, two neutral beam injectors (NBIs) will supply 16.5 MW each, by neutralizing accelerated negative hydrogen or deuterium ions. The requirements of ITER NBIs (40A/1 MeV D- ions for ≤1 h, 46A/870 keV H- ions for ≤1000 s) have never been simultaneously attained. So in the Neutral Beam Test Facility (NBTF, Consorzio RFX, Italy) the operation of the full-scale ITER NBI prototype (MITICA) will be tested and optimised up to full performances, focussing on accelerator (including voltage holding), beam optics, neutralisation, residual ion removal. The NBTF includes also the full-scale prototype of the ITER NBI source with 100 keV particle energy (SPIDER), for early investigation of: negative ion production and extraction, source uniformity, negative ion current density and beam optics. This paper will describe the main results of the first two years of SPIDER operation, devoted to characterizing plasma and beam parameters, including investigation of RF-plasma coupling efficiency and magnetic filter field effectiveness in reducing co-extracted electrons. SPIDER is progressing towards the first caesium injection, which aims at increasing the negative ion density. A major shutdown, planned for 2021, to solve the issues identified during the operation and to carry out programmed modifications, will be outlined. The installation of each MITICA power supply and auxiliary system is completed; in-vessel mechanical components are under procurement by Fusion for Energy (F4E). Integration, commissioning and test of the power supplies, procured by F4E and QST, as the Japanese Domestic Agency (JADA), will be presented. In particular, 1.0MV insulating tests were carried out step-by-step and successfully completed. In 2020 integrated tests of the power supplies on the accelerator dummy load started, including the assessment of their resilience to accelerator grid breakdowns using a short-circuit device located in vacuum. The aggressive programme, to validate the NBI design at NBTF and to meet ITER schedule (requiring NBIs in operation in 2032), will be outlined. Unfortunately, in 2020 the coronavirus disease infection affected the NBTF activities. A solution to proceed with integrated power tests despite the coronavirus is presented.

The SPIDER Beam Source (BS), the first prototype of a full scale ion source for the ITER Heating Neutral Beam injector, was delivered to the Neutral Beam Test Facility (NBTF) site in Padova (Italy) after about five years procurement phase. A huge effort was devoted during the procurement for quality controls and testing at the supplier’s workshops. Several activities were also carried out on NBTF site for verification/adjustment of interfaces, solution of still open issues, as well as final tests before and after installation inside the vacuum vessel. The NBTF Team undertook the BS site acceptance tests including: pressure and leak tests of the hydraulic circuits; electrical tests; measurement of magnetic field profiles; functionality tests of diagnostics installed on the BS; checks of grids alignment by means of laser tracker. Accurate positioning of the BS inside the vacuum vessel was performed and various service lines were connected in a tight space. Several improvements were undertaken in order to guarantee reliability and reduce the risks during the commissioning and experimental campaign in 2018. After installation, the integrated commissioning phase was initiated, powering the RF and high voltage circuits, followed by the first operation in vacuum.

The realization of the ITER Neutral Beam Test Facility (NBTF) and the start the experimental phase are important tasks of the fusion roadmap, since the target requirements of injecting to the plasma a beam of Deuterium atoms with a power up to 16.5 MW, at 1MeV of energy and with a pulse length up to 3600s have never been reached together before. The ITER NBTF, called PRIMA (Padova Research on ITER Megavolt Accelerator), is hosted in Padova, Italy; it includes two experiments: MITICA, the full-scale prototype of the ITER injector and SPIDER, the full-size negative ion source. The realization promoted by the ITER organization is carried out with the contribution of the European Union, channeled through the Joint Undertaking for ITER (F4E), of the Consorzio RFX which hosts the Test Facility, the Japanese and the Indian ITER Domestic Agencies (JADA and INDA) and several European laboratories, such as IPP-Garching, KIT-Karlsruhe, CCFECulham, CEA-Cadarache. The early start of operation of PRIMA experiments is urgent because sufficient experimental time is necessary to face and solve the issues related to the achievement of the desired performance in time for the ITER operation, requiring NBI since the beginning. Substantial progresses have been recently achieved: the buildings construction, begun in October 2012, has been completed by the end of 2015 and the installation of some components has been started since the end of 2014. The SPIDER realization is well advanced: the installation phase is proceeding in good agreement with the general plan; it is expected to be almost completed by the end of 2016. In parallel, the commissioning of the SPIDER power supply (PS) and auxiliary plant systems is being proceeding. Tests at full power and remote control are planned, including also those addressed to reproduce the grid breakdowns and to test the relevant protections. The design of the MITICA injector components was completed in 2015their procurement is being made through a number of tenders, some of them already launched. The HV Power Supply system of the MITICA 1MV accelerator, provided by JADA, was delivered on site in December 2015. The challenging installation of these components, including the step-up transformers and the SF6 gas insulated transmission line, started soon after and will go on throughout 2016. The present phase, with the PRIMA buildings continuously filled with new components, with the installation activities progressing and with also the commissioning and testing phase starting represents a substantial step forward toward the main target. The paper will describe the main challenges the Project Team has dealt during this phase and the important feedback derived for the ITER HNB systems both from the technical and the organizational standpoints.

SPIDER is one of two projects of the ITER Neutral Beam Test Facility under construction in Padova, Italy, at the Consorzio RFX premises. It will have a 100 keV beam source with a full-size prototype of the radiofrequency ion source for the ITER neutral beam injector (NBI) and also, similar to the ITER diagnostic neutral beam, it is designed to operate with a pulse length of up to 3600 s, featuring an ITER-like magnetic filter field configuration (for high extraction of negative ions) and caesium oven (for high production of negative ions) layout as well as a wide set of diagnostics. These features will allow a reproduction of the ion source operation in ITER, which cannot be done in any other existing test facility. SPIDER realization is well advanced and the first operation is expected at the beginning of 2018, with the mission of achieving the ITER heating and diagnostic NBI ion source requirements and of improving its performance in terms of reliability and availability. This paper mainly focuses on the preparation of the first SPIDER operations - integration and testing of SPIDER components, completion and implementation of diagnostics and control and formulation of operation and research plan, based on a staged strategy

SPIDER is one of the two projects of the ITER Neutral Beam Test Facility (NBTF) under construction in Padova, Italy, at Consorzio RFX premises; it is the full-size prototype of the radiofrequency (RF) ion source for ITER Neutral Beam Injector (NBI), with beam energy of 100keV, designed to operate with pulse length up to 3600 s, featuring ITER-like filter field configuration, caesium oven layout and a wide set of diagnostics. These features will allow reproducing the ion source operation like in ITER as cannot be done in any other existing test facility. SPIDER realization is well advanced and the first operation is expected at the beginning of 2018, with the mission to prove the possibility of achieving the ITER NBI ion source target requirements and of improving its performance in terms of reliability and availability. This paper mainly focuses on the preparation of the first SPIDER operations: integration and testing of SPIDER components, completion and implementation of diagnostics and control and workout of operation and research plan, based on a staged strategy.

The MITICA experiment (Megavolt ITER Injector & Concept Advancement) is the prototype and the test bed of the Heating and Current Drive Neutral Beam Injectors (HNB), which will be necessary for the full-performance exploitation of ITER. MITICA injector experiments shall demonstrate the reliable and accurate emission of a 17 MW beam of neutral particles of deuterium or hydrogen for duration up to 1 hour, fulfilling ITER specific requirements. MITICA test bed is in the final design phase and will be procured and installed in PRIMA facility (Padova Research on Injector Megavolt Accelerated) in Padova, Italy. The beam source is the key component of the system, as its goal is the generation of the 1 MeV accelerated beam of deuterium or hydrogen negative ions. The beam source is a complex system, having overall dimensions in the order of 4x4x3 m3 and a weight of around 20 tons. A major effort has been put in place in the recent months for the design closure, in collaboration with ITER Organization, F4E and European and Japanese laboratories (IPP, CEA, JAEA), solving the remaining outstanding issues, namely the optimization of the thermo-mechanical behavior of the accelerator grid segments subjected to a substantial heat power deposition, the finalization of the mechanical structure of the accelerator coherently identifying a reliable assembly and alignment procedure, the completion of the design of all involved interfaces with surrounding components and maintenance tools, and the conclusion of last R&D campaign on large ceramic insulators. Comprehensive analyses have also been carried out to finally verify the structural and electrostatic design of the overall structure with regard to normal operation, main fault conditions and seismic events. This paper presents the highlights of the latest developments for the finalization of the MITICA beam source design, together with a description of the most recent analyses and R&D activities carried out in support of the design.

The ITER project requires additional heating by two neutral beam injectors, each accelerating to 1 MV a 40 A beam of negative deuterium ions, to deliver to the plasma a power of about 17 MW for one hour. As these requirements have never been experimentally met, it was recognized as necessary to setup a test facility, PRIMA (Padova Research on ITER Megavolt Accelerator), in Italy, including a full-size negative ion source, SPIDER, and a prototype of the whole ITER injector, MITICA, aiming to develop the heating injectors to be installed in ITER. This realization is made with the main contribution of the European Union, through the Joint Undertaking for ITER (F4E), the ITER Organization and Consorzio RFX which hosts the Test Facility. The Japanese and the Indian ITER Domestic Agencies (JADA and INDA) participate in the PRIMA enterprise; European laboratories, such as IPP-Garching, KIT-Karlsruhe, CCFE-Culham, CEA-Cadarache and others are also cooperating. Presently, the assembly of SPIDER is on-going and the MITICA design is being completed. The paper gives a general overview of the test facility and of the status of development of the MITICA and SPIDER main components at this important stage of the overall development; then it focuses on the latest and most critical issues, regarding both physics and technology, describing the identified solutions.

In ITER, each heating neutral beam injector (HNB) will deliver about 16.5 MW heating power by accelerating a 40 A deuterium negative ion beam up to the energy of 1 MeV. The ions are generated inside a caesiated negative ion source, where the injected H2/D2 is ionized by a radio frequency electromagnetic field. The SPIDER test bed, currently being manufactured, is going to be the ion source test facility for the full size ion source of the HNBs and of the diagnostic neutral beam injector of ITER. The SPIDER beam source comprises an ion source with 8 radio-frequency drivers and a three-grid system, providing an overall acceleration up to energies of about 100 keV [1]. SPIDER represents a substantial step forward between the half ITER size ion source, which is currently being tested at the ELISE test bed in IPP-Garching, and the negative ion sources to be used on ITER, in terms of layout, dimensions and operating parameters. The SPIDER beam source will be housed inside a vacuum vessel which will be equipped with a beam dump and a graphite diagnostic calorimeter. The manufacturing design of the main parts of the SPIDER beam source has been completed and many of the tests on the prototypes have been successfully passed. The most complex parts, from the manufacturing point of view, of the ion source and the accelerator, developed by galvanic deposition of copper are being manufactured. The manufacturing phase will be completed within 2015, when the assembly of the device will start at the PRIMA site, in Padova (I). The paper describes the status of the procurement, the adaptations operated on the design of the beam source for the fabrication, with particular emphasis to the engineering development to enable the fulfillment of the tight requirements set in the technical specifications. Moreover the tests performed on the prototypes are reported.

The first boundary feedthroughs of the ITER heating neutral beam (HNB) injectors are key components of the neutral beam system. They allow the penetration of signals and power from/to the beam line components (BLC) and front end components (FEC), through the confinement boundary of ITER. The design status of the two types of feedthroughs is presented in the first part. This includes the design requirements, cabling strategy, the analysis done and the maintenance strategies. The second part deals with the qualification of the feedthroughs. Being made of brittle material and not covered by mechanical standard a qualification by testing strategy is proposed based on existing rules and norms. The design of the feedthroughs is almost finished and satisfies all the requirements. The next step is the procurement for their integration in the MITICA [1] test bed and the detailed definition of the qualification tests to be carried out for the HNB feedthroughs.

The megavolt ITER injector and concept advancement experiment is the prototype and the test bed of the ITER heating and current drive neutral beam injectors, currently in the final design phase, in view of the installation in Padova Research on Injector Megavolt Accelerated facility in Padova, Italy. The beam source is the key component of the system, as its goal is the generation of the 1 MeV accelerated beam of deuterium or hydrogen negative ions. This paper presents the highlights of the latest developments for the finalization of the MITICA beam source design, together with a description of the most recent analyses and R&D activities carried out in support of the design.

The Vacuum vessel of the ITER Heating Neutral Beam injector is a key component of the neutral beam system. It is host to the injector components and is also an extension of the ITER Vacuum Vessel. This article presents the s tatus of the design of the vessel. The first part of this article is dedicated to the presentation of the main design requirements. Besides the pressure and thermal load s, the various interfaces with other components are important constraints for the design . Some have specific requirements concerning displacement, or require specific featur es for their maintenance. Indeed all maintenance involving an opening of the vessel need s to be performed using remote handling systems. The second part aims at presenting the present desi gn of the NB vessel. Various concepts were studied before coming to the present day design. Structures were optimised to satisfy the RCC-MR code under the various loadin g scenarios applied to the vessel, both for normal and accidental cases. In addition, the vessel incorporates two sets of long lip seals which tolerate limited displacements. Lim iting the displacement is a real challenge considering the size of the flange and th e forces involved. An innovative solution has been developed to improve the mechanic al connection between the lids and the vessel walls in order to fulfil the requirement s. The vessel displacement is also important for the alignment of the Beam Line Compon ents with respect to the neutral beam and for the cryopumps interfaces. The geometry of the vessel was optimised to reduce the electric field stresses and to increase the voltage holding of the Beam Source, which is at 1MV. The present design satisfies all the requirements. The main issues have been solved, and the proposed design is now being optimised to f acilitate manufacturing.

Activities towards the establishment of the NB Test Facility (NBTF) in Padua-Italy and those related to the procurement of the heating neutral beams for ITER have recently reached a good level ofprogress thanks to the finalization of the agreements on theNBTF between F4E (the EU Domestic Agency for ITER), Consorzio RFX (the host of the NB test facility) and the ITER organization. This paper presents the status of the design of the various components within the EU scope of procurement, with a focus on the modificationsimplemented in the last years as a result of intense R&D activity undertaken in EU.

The ITER neutral beam (NB) injectors are the first injectors that will have to operate under conditions and constraints similar to those that will be encountered in a fusion reactor. These injectors will have to operate in a hostile radiation environment and they will become highly radioactive due to the neutron flux from ITER. The injectors will use a single large ion source and accelerator that will produce 40 A 1 MeV D− beams for pulse lengths of up to 3600 s. Significant design changes have been made to the ITER heating NB (HNB) injector over the past 4 years. The main changes are: Modifications to allow installation and maintenance of the beamline components with an overhead crane. The beam source vessel shape has been changed and the beam source moved to allow more space for the connections between the 1 MV bushing and the beam source. The RF driven negative ion source has replaced the filamented ion source as the reference design. The ion source and extractor power supplies will be located in an air insulated high voltage (−1 MV) deck located outside the tokamak building instead of inside an SF6 insulated HV deck located above the injector. Introduction of an all metal absolute valve to prevent any tritium in the machine to escape into the NB cell during maintenance. This paper describes the status of the design as of December 2008 including the above mentioned changes. The very important power supply system of the neutral beam injectors is not described in any detail as that merits a paper beyond the competence of the present authors. The R&D required to realize the injectors described in this paper must be carried out on a dedicated neutral beam test facility, which is not described here.

The electron cyclotron (EC), ion cyclotron (IC), heating-neutral beam (H-NB) and, although not in the day 1 baseline, lower hybrid (LH) systems intended for ITER have been reviewed in 2007/2008 in light of progress of physics and technology in the field. Although the overall specifications are unchanged, notable changes have been approved. Firstly, it has been emphasized that the HC the possibility to operate IC with 2 antennas with increased robustness (no moving parts); the possible increase to 2 MW of key components of the EC transmission systems in order to provide an easier upgrading of the EC power as may be required by the project; the addition of a building dedicated to the RF power sources and to a testing facility for acceptance of diagnostics and heating port plugs. Thirdly, the need of a plan for developing, in time for the active phase, a CD system such as LH suitable for very long pulse operation of ITER was recognised. The review describes these changes and their rationale.