Search

A system for multiple on-demand drug release has been prepared that can be activated with an alternating magnetic field as external trigger. The core/shell samples have been developed based on a macroscopic spherical iron core coated with a thermoresponsive polymer, poly(styrene-stat-butyl methacrylate), containing ibuprofen as a model drug. During exposure of the samples to the magnetic field (ON state), the release rate of ibuprofen is significantly increased, up to 35 times the release rate without the magnetic field (OFF state). Using one sample or two samples in line with the magnetic field does not influence the ON/OFF ratio of the system, showing the possibility of using multiple samples to increase and tune the drug dose. Increasing the concentration of ibuprofen in the polymer layer is shown to increase the release rate in both the ON and OFF states. Increasing the size of the iron core and, consequently, decreasing the polymer thickness, was found to only increase the release rate during exposure resulting in higher ON/OFF ratios. The developed on demand drug delivery systems represents a promising development towards on demand drug delivery implants. Graphical abstract: [InlineMediaObject not available: see fulltext.] Reflections on career goals: During my chemical engineering studies, it was only during my master thesis work that I decided to continue with PhD research as I really enjoyed doing original research. When coming to the end of my PhD research under supervision of Prof. Ulrich S. Schubert, I developed the ambition to pursue an academic career. Fortunately, I got the opportunity to stay with Prof. Schubert as project leader for the Dutch Polymer Institute (DPI). Within this position, I supervised ten researchers and was able to start developing my independent research lines. Despite that I now advise students to not stay in the same laboratory, this first position allowed me to gain some initial independence and to publish a large number of papers that has been a great benefit in my further career. After two and a half years I needed a new challenge that I found by taking up a part-time position at a start-up company in Eindhoven, Dolphys Medical BV, while I also continued as part-time group leader for the DPI. As senior product developer, I was in charge of the research and learned to focus on the application rather than scientific curiosity. This experience made me realize that I prefer the freedom to do academic blue sky research and decided to fully go for an academic position. After personal discussions with some prominent professors in the Netherlands, I applied for a postdoc fellowship in the Netherlands with Prof. Roeland Nolte as well as a Humboldt fellowship in Germany with Prof. Martin Möller, which I both got. As a result, I went one year ‘abroad’ to Aachen and returned to Nijmegen where I intended to start my independent career. However, another opportunity came along. Via my personal network I was informed that I would make a good chance if I applied for a new professor scheme in Ghent. So I applied and the rest is history. Picture of the Supramolecular Chemistry Group (2017) [InlineMediaObject not available: see fulltext.].

Microbial life below the seafloor has changed over geological time, but these changes are often not obvious, as they are not recorded in the sediment. Sulphur (S) isotope values in pyrite extracted from a Plio- to Holocene sequence of the Peru Margin (Ocean Drilling Program, ODP, Site 1229) show a down-core pattern that correlates with the pattern of carbon (C) isotopes in diagenetic dolomite. Early formation of the pyrite is indicated by the mineralogical composition of iron, showing a high degree of pyritization throughout the sedimentary sequence. Hence, the S-record could not have been substantially overprinted by later pyrite formation. The S- and C-isotope profiles show, thus, evidence for two episodes of enhanced microbial methane production with a very shallow sulphate-methane transition zone. The events of high activity are correlated with zones of elevated organic C content in the stratigraphic sequence. Our results demonstrate how isotopic signatures preserved in diagenetic mineral phases provide information on changes of past biogeochemical activity in a dynamic sub-seafloor biosphere.

© 2019 Elsevier Ltd Natural recovery and remediation of acid mine drainage (AMD) reduces the generation of acidity and transport of trace elements in the runoff. A natural wetland that receives and remediates AMD from an abandoned copper mine at Parys Mountain (Anglesey, UK) was investigated for better understanding of the remediation mechanisms. Water column concentrations of dissolved Fe and S species, trace metal (loid)s and acidity decreased markedly as the mine drainage stream passed through the wetland. The metal (loid)s were removed from the water column by deposition into the sediment. Fe typically accumulated to higher concentrations in the surface layers of sediment while S and trace metal (loid)s were deposited at higher concentration within deeper (20–50 cm) sediments. High resolution X-ray fluorescence scans of sediment cores taken at three sites along the wetland indicates co–immobilization of Zn, Cu and S with sediment depth as each element showed a similar core profile. To examine the role of bacteria in sediment elemental deposition, marker genes for Fe and S metabolism were quantified. Increased expression of marker genes for S and Fe oxidation was detected at the same location within the middle of the wetland where significant decrease in SO42− and Fe2+ was observed and where generation of particulate Fe occurs. This suggests that the distribution and speciation of Fe and S that mediates the immobilization and deposition of trace elements within the natural wetland sediments is mediated in part by bacterial activity.

Carbon mineralization processes and their dependence on environmental conditions (e.g. through macrobenthic bioturbation) have been widely studied in temperate coastal sediments, but almost nothing is known about these processes in subtropical coastal sediments. This study investigated pathways of organic carbon mineralization and associated effects of macrobenthic bioturbation in winter and summer (September 2012 and February 2014) at the SE Brazilian coast. Iron reduction (FeR) was responsible for 73–81% of total microbial carbon mineralization in September 2012 and 32–61% in February 2014. Similar high rates of FeR have only been documented a few times in coastal sediments and can be sustained by the presence of large bioturbators. Denitrification accounted for 5–27% of total microbial carbon mineralization while no SO42− reduction was detected in any season. Redox profiles suggested that conditions were less reduced in February 2014 than in September 2012, probably associated with low reactivity of the organic matter, higher rates of aerobic respiration and bioirrigation by the higher density of small-macrofauna. Bioturbation by small macrofauna may maintain the sediment oxidized in summer, while large-sized species stimulate the reoxidation of reduced compounds throughout the year. Therefore, bioturbation seems to have an important role modulating the pathways of carbon mineralization in the area.

The molecular imprinting technique depends on the molecular recognition. It is a polymerization method around the target molecule. Hence, this technique creates specific cavities in the cross-linked polymeric matrices. In present study, a sensitive imprinted electrochemical biosensor based on Fe@Au nanoparticles (Fe@AuNPs) involved in 2-aminoethanethiol (2-AET) functionalized multi-walled carbon nanotubes (f-MWCNs) modified glassy carbon (GC) electrode was developed for determination of cefexime (CEF). The results of X-ray photoelectron spectroscopy (XPS) and reflection-absorption infrared spectroscopy (RAIRS) confirmed the formation of the developed surfaces. CEF imprinted film was constructed by cyclic voltammetry (CV) for 9 cycles in the presence of 80 mM pyrrole in phosphate buffer solution (pH 6.0) containing 20mM CEF. The developed electrochemical biosensor was validated according to the International Conference on Harmonisation (ICH) guideline and found to be linear, sensitive, selective, precise and accurate. The linearity range and the detection limit were obtained as 1.0 × 10(-10)-1.0 × 10(-8)M and 2.2 × 10(-11)M, respectively. The developed CEF imprinted sensor was successfully applied to real samples such as human plasma. In addition, the stability and reproducibility of the prepared molecular imprinted electrode were investigated. The excellent long-term stability and reproducibility of the prepared CEF imprinted electrodes make them attractive in electrochemical sensors.

The bacterial siderophore pyochelin is composed of salicylate and two cysteine-derived heterocycles, the second of which is modified by reduction and N-methylation during biosynthesis. In Pseudomonas aeruginosa, the first cysteine residue is converted to its D-isoform during thiazoline ring formation, whereas the second cysteine remains in its L-configuration. Stereochemistry is opposite in the Pseudomonas fluorescens siderophore enantio-pyochelin, in which the first ring originates from L-cysteine and the second ring from D-cysteine. Both siderophores promote growth of the producer organism during iron limitation and induce the expression of their biosynthesis genes by activating the transcriptional AraC-type regulator PchR. However, neither siderophore is functional as an iron carrier or as a transcriptional inducer in the other species, demonstrating that both processes are highly stereospecific. Stereospecificity of pyochelin/enantio-pyochelin-mediated iron uptake is ensured at two levels: (i) by the outer membrane siderophore receptors and (ii) by the cytosolic PchR regulators.