Search

This review aims to provide a comprehensive overview of nano- and microscopic materials that can provide thermal radiation insulation without reducing visible light transmittance, thereby reducing heat loss and conserving energy in greenhouses. We also reviewed the radial and thermal properties of greenhouse covering materials. Fillers, colorants, reinforcers, and additives, as well as glass, plastic film, and plastic sheet materials, were discussed. Additionally, by searching for keywords like insulation film, insulation agent, and infrared insulation, compounds based on graphene and fullerene as well as phase transition materials (PCMs) that may be used for radiation insulation, we proposed their potential use in greenhouse covers. They can be divided into semi-transparent photovoltaic (PV) materials, zinc oxide-based film fillers, and silica filter films. We discussed the radiation heat insulation and light transmission characteristics of these materials. Nano-synthesis techniques were also investigated. Based on latest advances in the literature, future developments in the micro- and macroscale synthesis of nanomaterials will enable additional innovations in covering materials for greenhouse structures. A limiting factor, though, was the high sensitivity of PVs to external climatic and meteorological variables. The ability of materials used to make greenhouse covers to control the microclimate, reduce CO2 emissions, use less energy, and increase agricultural productivity, however, cannot be disputed. Similar to this, a thorough examination of the uses of various greenhouse technologies reveals that the advancements also have financial advantages, particularly in terms of reducing greenhouse heating and cooling expenses. The PCMs, which decreased greenhouse-operating costs by maintaining constant ambient temperatures, provide ample evidence of this.

Manufacturing bio-based and biodegradable materials for electronic applications is a swiftly growing field today. This approach can effectively tackle the future electronic waste problems. However, the preparation of such sustainable materials with high conductivity remains a challenging task. Moreover, in many cases, the use of noxious solvents may be unavoidable. This study shows the feasibility of an aqueous emulsion-based printable conductive ink to be used in the field of flexible electronic devices. The emulsion ink contains polylactic acid (PLA) as a binder and graphene nanoplatelets as a conductive filler. It shows an encouraging electrical conductivity of 34.5 S/m when spray-coated onto a cotton fabric. Moreover, the conductive composite fabrics were very stable in cyclic strain tests, suitable for wearable electronics. A hot pressing post-treatment of the printed composite fabrics improved the electrical conductivity by up to two times. Additionally, the coatings also enhanced the mechanical properties of the cotton fabrics by increasing the Young's modulus values almost twice compared to pristine fabric. This eco-friendly composite ink can be used as strain sensors for transforming certain electronic components into biodegradable versions.

In light of the global health crisis triggered by the COVID-19 pandemic, numerous experts have deemed the utilization of hand sanitizers imperative as a precautionary measure against the virus. Consequently, the demand for hand sanitizers has experienced a substantial surge. Since the beginning of 2020, the utilization of alcohol-free hand sanitizers has been increasingly favored due to the potential risks associated with alcohol poisoning, flammability, as well as the adverse effects on skin lipid dissolution, dehydration, and sebum reduction, which can lead to severe cases of eczema and norovirus infections. In this study, we developed an aqueous hand sanitizer that does not contain alcohol. The sanitizer consists of naturally occurring, food-grade organic acids, including lactic, citric, and azelaic acids. Additionally, food-grade ammonium sulfate and a small amount of povidone-iodine (PVPI) were included in the formulation to create a synergistic and potent antibacterial effect. The effectiveness of the hand sanitizer was evaluated against four common foodborne pathogens, namely Clostridium botulinum, Escherichia coli, Listeria monocytogenes, and Staphylococcus aureus, via in vitro testing. The organic acids exhibited a synergistic inhibitory function, resulting in a 3-log reduction in CFU/mL. Furthermore, the presence of povidone-iodine and ammonium sulfate enhanced their antibacterial effect, leading to a 4-log reduction in CFU/mL. The hand sanitizer solution remained stable even after 60 days of storage. During this period, the detection of additional triiodide (I3−) ions occurred, which have the ability to release broad-spectrum molecular iodine upon penetrating the cell walls. This alcohol-free hand sanitizer may offer extended protection and is anticipated to be gentle on the skin. This is attributed to the presence of citric and lactic acids, which possess cosmetic properties that soften and smoothen the skin, along with antioxidant properties.

Bacterial infections are a constant challenge in the management of acute and chronic wounds. Chronic wounds, such as diabetic foot ulcers, have increased significantly in the last few years due to the rise of an aging population. A better understanding of the infectious pathophysiological mechanisms is urgently needed along with new options for the treatment of wound infections and wound-healing disorders. New advances in the preparation of biocompatible dressing materials that can be loaded with antimicrobial drugs may improve the topical treatment of infected wounds. In this study, we investigated the antimicrobial activity of polyvinylpyrrolidone (PVP) foils loaded with ciprofloxacin (Cipro-foils) in the presence of acetic acid as a co-solvent. We used ex vivo human wounds that were infected with two bacterial strains: methicillin-resistant Staphylococcus aureus (MRSA) or Pseudomonas aeruginosa (PAO1). The effectiveness of the treatment was demonstrated by the quantification of the living bacteria extracted from the wound and the detection of released immunological mediators in skin extracts and in the skin culture media. We found that Cipro-foils effectively treated the infection with both PAO1 and MRSA. Other than PAO1, MRSA had no lytic activity toward skin proteins. MRSA infections increased cytokines’ expression and release. Interestingly, treatment with Cipro-foils could partially counteract these effects.

Polysaccharides are naturally occurring complex molecules with exceptional physicochemical properties and bioactivities. They originate from plant, animal, and microbial-based resources and processes and can be chemically modified. The biocompatibility and biodegradability of polysaccharides enable their increased use in nanoscale synthesis and engineering for drug encapsulation and release. This review focuses on sustained drug release studies from nanoscale polysaccharides in the fields of nanotechnology and biomedical sciences. Particular emphasis is placed on drug release kinetics and relevant mathematical models. An effective release model can be used to envision the behavior of specific nanoscale polysaccharide matrices and reduce impending experimental trial and error, saving time and resources. A robust model can also assist in translating from in vitro to in vivo experiments. The main aim of this review is to demonstrate that any study that establishes sustained release from nanoscale polysaccharide matrices should be accompanied by a detailed analysis of drug release kinetics by modeling since sustained release from polysaccharides not only involves diffusion and degradation but also surface erosion, complicated swelling dynamics, crosslinking, and drug-polymer interactions. As such, in the first part, we discuss the classification and role of polysaccharides in various applications and later elaborate on the specific pharmaceutical processes of polysaccharides in ionic gelling, stabilization, cross-linking, grafting, and encapsulation of drugs. We also document several drug release models applied to nanoscale hydrogels, nanofibers, and nanoparticles of polysaccharides and conclude that, at times, more than one model can accurately describe the sustained release profiles, indicating the existence of release mechanisms running in parallel. Finally, we conclude with the future opportunities and advanced applications of nanoengineered polysaccharides and their theranostic aptitudes for future clinical applications.

Abstract Although graphene nanoplatelets (GnPs) and carbon nanotubes (CNTs) are known to have demonstrated significant potential as functional fillers to improve the electrical and thermal properties of polymers, aside from the state of dispersion, the level of improvement has been found to be strongly correlated with the in situ orientation. However, achieving in situ orientation within a polymer presents significant technological challenges. In this paper, we show a simple and repeatable thermoforming process to fabricate high thermal conductive GnP nanocomposite pads using a self‐sealing stretchable film (parafilm, PF). The pads could be sliced and reoriented into vertical stacks and fused into new pads due to self‐sealing nature of PF. Hybrids pads were also constructed with MWCNTs. Vertically aligned hybrids featured thermal conductivities close to 6 W mK‐1 that could be effectively modeled by Maxwell‐Garnett (MG‐EMA) theory. Vertical alignment also improved bulk (volume) electrical conductivity to 0.1 S cm‐1. Moreover, MWCNTs have exceedingly enhanced the ductility and elongation at break values of GnP nanocomposites that justified their incorporation into the nanocomposites. These hybrids can be easily adapted to various thermal management applications either in the form of freestanding thick pads (1‐3 mm) or thermal coatings due to the self‐sealing nature of the matrix.

In response to the pervasive anthropogenic pollution of the ocean, this manuscript suggests the use of biodegradable elastomers in marine applications. The present study characterizes 25 samples of highly biodegradable polymers, obtained blending a base elastomer with natural fibers. Mechanical analysis and Scanning Electron Microscope imaging, reveal how base polymers behave differently depending on the plant fiber chosen, on the external forcing—exposure to water—and on the doses that constitute the final biocomposite. Results suggest that EcoflexTM 00-30 and EcoflexTM 00-50, mixed with potato starch, perform best mechanically, maintaining up to 70% of their maximum tensile strain. Moreover, early signs of degradation are visible on polysiloxane rubber blended with 50% vegetable fibers after 19 hours in distilled water. Analyses demonstrate that highly biodegradable elastomers are good candidates to satisfy the requirements of aquatic devices. Furthermore, the discussed materials can improve the dexterity and biodegradability of marine technology.

Commonly encountered problems in the manipulation of objects with robotic hands are the contact force control and the setting of approaching motion. Microelectromechanical systems (MEMS) sensors on robots offer several solutions to these problems along with new capabilities. In this review, we analyze tactile, force and/or pressure sensors produced by MEMS technologies including off-the-shelf products such as MEMS barometric sensors. Alone or in conjunction with other sensors, MEMS platforms are considered very promising for robots to detect the contact forces, slippage and the distance to the objects for effective dexterous manipulation. We briefly reviewed several sensing mechanisms and principles, such as capacitive, resistive, piezoresistive and triboelectric, combined with new flexible materials technologies including polymers processing and MEMS-embedded textiles for flexible and snake robots. We demonstrated that without taking up extra space and at the same time remaining lightweight, several MEMS sensors can be integrated into robotic hands to simulate human fingers, gripping, hardness and stiffness sensations. MEMS have high potential of enabling new generation microactuators, microsensors, micro miniature motion-systems (e.g., microrobots) that will be indispensable for health, security, safety and environmental protection.

The first bioprocess that occurs in response to wounding is the deterrence of local hemorrhage. This is accomplished by platelet aggregation and initiation of the hemostasis cascade. The resulting blood clot immediately enables the cessation of bleeding and then functions as a provisional matrix for wound healing, which begins a few days after injury. Here, fibrinogen and fibrin fibers are the key players, because they literally serve as scaffolds for tissue regeneration and promote the migration of cells, as well as the ingrowth of tissues. Fibrin is also an important modulator of healing and a host defense system against microbes that effectively maintains incoming leukocytes and acts as reservoir for growth factors. This review presents recent advances in the understanding and applications of fibrin and fibrin-fiber-incorporated biomedical materials applied to wound healing and subsequent tissue repair. It also discusses how fibrin-based materials function through several wound healing stages including physical barrier formation, the entrapment of bacteria, drug and cell delivery, and eventual degradation. Pure fibrin is not mechanically strong and stable enough to act as a singular wound repair material. To alleviate this problem, this paper will demonstrate recent advances in the modification of fibrin with next-generation materials exhibiting enhanced stability and medical efficacy, along with a detailed look at the mechanical properties of fibrin and fibrin-laden materials. Specifically, fibrin-based nanocomposites and their role in wound repair, sustained drug release, cell delivery to wound sites, skin reconstruction, and biomedical applications of drug-loaded fibrin-based materials will be demonstrated and discussed.

Waterborne polyurethane dispersions can be designed to generate highly functional and environmentally friendly polymer systems. The use of water as the main dispersion medium is very advantageous for the environment and the introduction of linear and aliphatic polyols such as polyether and polyesters in the formulations can make them highly biocompatible and susceptible to biodegradation. In this study, we fabricated biodegradable, flexible and transparent plastic films by hybridizing a waterborne aliphatic polyester polyurethane (PU) suspension with polyvinylpyrrolidone (PVP) using mechanical homogenization in water. Films were cast containing different concentrations of PVP. The hybrids containing 50 wt.% PVP (PU/PVP_50/50) were hydrophobic, stretchable, highly transparent and ductile beyond 100% strain compared to highly brittle PVP. The mechanical properties of the PU/PVP_50/50 film remained stable after repeated immersion wet–dry cycles, each lasting 2 days, and the dried films recovered their mechanical properties after each cycle. Based on a 28-day biochemical oxygen demand (BOD) test, the hybrid PU/PVP_50/50 film underwent extensive biodegradation. This simple but effective process can be very suitable in producing biodegradable ductile films with very good transparency that can serve a number of applications such as agricultural mulches, food and pharmaceutical packaging and biomedical field.

Polymer nanofibers have exceptionally high surface area. This is advantageous compared to bulk polymeric structures, as nanofibrils increase the area over which materials can be transported into and out of a system, via diffusion and active transport. On the other hand, since hydrogels possess a degree of flexibility very similar to natural tissue, due to their significant water content, hydrogels made from natural or biodegradable macromolecular systems can even be injectable into the human body. Due to unique interactions with water, hydrogel transport properties can be easily modified and tailored. As a result, combining nanofibers with hydrogels would truly advance biomedical applications of hydrogels, particularly in the area of sustained drug delivery. In fact, certain nanofiber networks can be transformed into hydrogels directly without the need for a hydrogel enclosure. This review discusses recent advances in the fabrication and application of biomedical nanofiber hydrogels with a strong emphasis on drug release. Most of the drug release studies and recent advances have so far focused on self-gelling nanofiber systems made from peptides or other natural proteins loaded with cancer drugs. Secondly, polysaccharide nanofiber hydrogels are being investigated, and thirdly, electrospun biodegradable polymer networks embedded in polysaccharide-based hydrogels are becoming increasingly popular. This review shows that a major outcome from these works is that nanofiber hydrogels can maintain drug release rates exceeding a few days, even extending into months, which is an extremely difficult task to achieve without the nanofiber texture. This review also demonstrates that some publications still lack careful rheological studies on nanofiber hydrogels; however, rheological properties of hydrogels can influence cell function, mechano-transduction, and cellular interactions such as growth, migration, adhesion, proliferation, differentiation, and morphology. Nanofiber hydrogel rheology becomes even more critical for 3D or 4D printable systems that should maintain sustained drug delivery rates.

Advances in technology have led to the production of sustainable antioxidants and natural monomers for food packaging and targeted drug delivery applications. Of particular importance is the synthesis of lignin polymers, and graft polymers, dopamine, and polydopamine, inulin, quercetin, limonene, and vitamins, due to their free radical scavenging ability, chemical potency, ideal functional groups for polymerization, abundance in the natural environment, ease of production, and activation of biological mechanisms such as the inhibition of the cellular activation of various signaling pathways, including NF-κB and MAPK. The radical oxygen species are responsible for oxidative damage and increased susceptibility to cancer, cardiovascular, degenerative musculoskeletal, and neurodegenerative conditions and diabetes; such biological mechanisms are inhibited by both synthetic and naturally occurring antioxidants. The orientation of macromolecules in the presence of the plasticizing agent increases the suitability of quercetin in food packaging, while the commercial viability of terpenes in the replacement of existing non-renewable polymers is reinforced by the recyclability of the precursors (thyme, cannabis, and lemon, orange, mandarin) and marginal ecological effect and antioxidant properties. Emerging antioxidant nanoparticle polymers have a broad range of applications in tumor-targeted drug delivery, food fortification, biodegradation of synthetic polymers, and antimicrobial treatment and corrosion inhibition. The aim of the review is to present state-of-the-art polymers with intrinsic antioxidant properties, including synthesis scavenging activity, potential applications, and future directions. This review is distinct from other works given that it integrates different advances in antioxidant polymer synthesis and applications such as inulin, quercetin polymers, their conjugates, antioxidant-graft-polysaccharides, and polymerization vitamins and essential oils. One of the most comprehensive reviews of antioxidant polymers was published by Cirillo and Iemma in 2012. Since then, significant progress has been made in improving the synthesis, techniques, properties, and applications. The review builds upon existing research by presenting new findings that were excluded from previous reviews.

Applications of cyanoacrylate monomers are generally limited to adhesives/glues (instant or superglues) and forensic sciences. They tend to polymerize rapidly into rigid structures when exposed to trace amounts of moisture. Transforming cyanoacrylate monomers into transparent polymeric films or coatings can open up several new applications, as they are biocompatible, biodegradable and have surgical uses. Like other acrylics, cyanoacrylate polymers are glassy and rigid. To circumvent this, we prepared transparent cyanoacrylate films by solvent casting from a readily biodegrade solvent, cyclopentanone. To improve the ductility of the films, poly(propylene carbonate) (PPC) biopolymer was used as an additive (maximum 5 wt.%) while maintaining transparency. Additionally, ductile films were functionalized with caffeic acid (maximum 2 wt.%), with no loss of transparency while establishing highly effective double functionality, i.e., antioxidant effect and effective UV-absorbing capability. Less than 25 mg antioxidant caffeic acid release per gram film was achieved within a 24-h period, conforming to food safety regulations. Within 2 h, films achieved 100% radical inhibition levels. Films displayed zero UVC (100–280 nm) and UVB (280–315 nm), and ~15% UVA (315–400 nm) radiation transmittance comparable to advanced sunscreen materials containing ZnO nanoparticles or quantum dots. Transparent films also exhibited promising water vapor and oxygen barrier properties, outperforming low-density polyethylene (LPDE) films. Several potential applications can be envisioned such as films for fatty food preservation, biofilms for sun screening, and biomedical films for free-radical inhibition.

Hyaluronic acid (HA) also known as hyaluronan, is a natural polysaccharide—an anionic, non-sulfated glycosaminoglycan—commonly found in our bodies. It occurs in the highest concentrations in the eyes and joints. Today HA is used during certain eye surgeries and in the treatment of dry eye disease. It is a remarkable natural lubricant that can be injected into the knee for patients with knee osteoarthritis. HA has also excellent gelling properties due to its capability to bind water very quickly. As such, it is one the most attractive controlled drug release matrices and as such, it is frequently used in various biomedical applications. Due to its reactivity, HA can be cross-linked or conjugated with assorted bio-macromolecules and it can effectively encapsulate several different types of drugs, even at nanoscale. Moreover, the physiological significance of the interactions between HA and its main membrane receptor, CD44 (a cell-surface glycoprotein that modulates cell–cell interactions, cell adhesion and migration), in pathological processes, e.g., cancer, is well recognized and this has resulted in an extensive amount of studies on cancer drug delivery and tumor targeting. HA acts as a therapeutic but also as a tunable matrix for drug release. Thus, this review focuses on controlled or sustained drug release systems assembled from HA and its derivatives. More specifically, recent advances in controlled release of proteins, antiseptics, antibiotics and cancer targeting drugs from HA and its derivatives were reviewed. It was shown that controlled release from HA has many benefits such as optimum drug concentration maintenance, enhanced therapeutic effects, improved efficiency of treatment with less drug, very low or insignificant toxicity and prolonged in vivo release rates.

Topical treatment of wound infections is often a challenge due to limited drug availability at the site of infection. Topical drug delivery is an attractive option for reducing systemic side effects, provided that a more selective and sustained local drug delivery is achieved. In this study, a poorly water-soluble antibiotic, ciprofloxacin, was loaded on polyvinylpyrrolidone (PVP)-based foils and nanofiber mats using acetic acid as a solubilizer. Drug delivery kinetics, local toxicity, and antimicrobial activity were tested on an ex vivo wound model based on full-thickness human skin. Wounds of 5 mm in diameter were created on 1.5 × 1.5 cm skin blocks and treated with the investigated materials. While nanofiber mats reached the highest amount of delivered drug after 6 h, foils rapidly achieved a maximum drug concentration and maintained it over 24 h. The treatment had no effect on the overall skin metabolic activity but influenced the wound healing process, as observed using histological analysis. Both delivery systems were efficient in preventing the growth of Pseudomonas aeruginosa biofilms in ex vivo human skin. Interestingly, foils loaded with 500 µg of ciprofloxacin accomplished the complete eradication of biofilm infections with 1 × 109 bacteria/wound. We conclude that antimicrobial-loaded resorbable PVP foils and nanofiber mats are promising delivery systems for the prevention or topical treatment of infected wounds.

Poly(furfuryl alcohol) (PFA) is a bioresin synthesized from furfuryl alcohol (FA) that is derived from renewable saccharide-rich biomass. In this study, we compounded this bioresin with polycaprolactone (PCL) for the first time, introducing new functional polymer blends. Although PCL is biodegradable, its production relies on petroleum precursors such as cyclohexanone oils. With the method proposed herein, this dependence on petroleum-derived precursors/monomers is reduced by using PFA without significantly modifying some important properties of the PCL. Polymer blend films were produced by simple solvent casting. The blends were characterized in terms of surface topography by atomic force microscopy (AFM), chemical interactions between PCL and PFA by attenuated total reflection-Fourier transform infrared (ATR-FTIR), crystallinity by XRD, thermal properties by differential scanning calorimetry (DSC), and mechanical properties by tensile tests and biocompatibility by direct and indirect toxicity tests. PFA was found to improve the gas barrier properties of PCL without compromising its mechanical properties, and it demonstrated sustained antioxidant effect with excellent biocompatibility. Our results indicate that these new blends can be potentially used in diverse applications ranging from food packing to biomedical devices.

Stacked-cup carbon nanotubes (SCCNTs) are generally referred to as carbon nanofibers (CNFs). SCCNTs are much less expensive to fabricate and are regarded as good polymer modifiers suitable for large-scale production. Flexible, SCCNT-based soy lecithin biocomposites were fabricated using liquid natural rubber latex as binder. Natural polymers and the SCCNTs were dispersed in a green solvent using a benchtop high-pressure homogenizer. The inks were simply brush-on painted onto cellulose fiber networks and compacted by a hydraulic press so as to transform into conductive paper-like form. The resulting flexible SCCNT papers demonstrated excellent resistance against severe folding and bending tests, with volume resistivity of about 85 Ω·cm at 20 wt % SCCNT loading. The solvent enabled formation of hydrogen bonding between natural rubber and soy lecithin. Thermomechanical measurements indicated that the biocomposites have good stability below and above glass transition points. Moreover, the SCCNT biocomposites had high through-plane thermal conductivity of 5 W/mK and 2000 kJ/m3K volumetric heat capacity, ideal for thermal interface heat transfer applications.

Graphene is the first 2D crystal ever isolated by mankind. It consists of a single graphite layer, and its exceptional properties are revolutionizing material science. However, there is still a lack of convenient mass-production methods to obtain defect-free monolayer graphene. In contrast, graphene nanoplatelets, hybrids between graphene and graphite, are already industrially available. Such nanomaterials are attractive, considering their planar structure, light weight, high aspect ratio, electrical conductivity, low cost, and mechanical toughness. These diverse features enable applications ranging from energy harvesting and electronic skin to reinforced plastic materials. This review presents progress in composite materials with graphene nanoplatelets applied, among others, in the field of flexible electronics and motion and structural sensing. Particular emphasis is given to applications such as antennas, flexible electrodes for energy devices, and strain sensors. A separate discussion is included on advanced biodegradable materials reinforced with graphene nanoplatelets. A discussion of the necessary steps for the further spread of graphene nanoplatelets is provided for each revised field.

Articular cartilage surrounds the ends of diarthrodial joints (most common movable joints) and during motion, it experiences a wide range of loading conditions while remaining under exceedingly low-friction and wear-free conditions. This remarkable tribological performance stems from complex interactions between the synovial fluid and articular cartilage. In fact, lubricin and hyaluronic acid (HA) that are part of the synovial fluid are now known to be the key contributors to effective joint lubrication and wear protection. Studies involving animal models and artificial systems suggest that lubricin and HA molecules may work in tandem to produce a highly synergistic effect for lubrication. However, latest observations suggest that lubricin has significant potential for protecting the articular joints, probably more than HA. Recently, lurbicin-related friction regulation in soft eye tissues, where much lower forces are involved compared to knee joints for instance, has been shown to be related to dry eye disease and contact lens discomfort. As such, lubricin’s role in natural friction regulation is very complex. Moreover, partially unresolved water-lubricin interactions are essential for lubrication and load carrying function in the joints. The chemical structure of lubricin has inspired several chemists to synthesize new copolymers and polymer brushes that function just like lubricin in order to design new synthetic or bio-based lubricants with ultra-low-friction coefficients. Hence, lubricin has emerged as a key natural molecule for bioinspired tribology. The aim of this review is to present the latest advances in understanding of lubricin’s function in joint lubrication and in soft tissue friction (i.e., human eye) and document what has been achieved so far in transforming this biomedical knowledge into new polymer design for advanced engineering tribology. It is hoped that this review will catalyze research and development efforts in obtaining very stable and high load-bearing polymer-based ultra-low-friction surfaces via biomimicry.

Due to its biodegradable and bioabsorbable characteristics polylactic acid (PLA) has attracted considerable attention for numerous biomedical applications. Moreover, a number of tissue engineering problems for function restoration of impaired tissues have been addressed by using PLA and its copolymers due to their biocompatibility and distinctive mechanical properties. Recent studies on various stereocomplex formation between enantiomeric PLA, poly(l-lactide) (PLLA) and poly(d-lactide) (PDLA) indicated that stereocomplexation enhances the mechanical properties as well as the thermal- and hydrolysis-resistance of PLA polymers. On the other hand, biomedical application of graphene is a relatively new front with significant potential. Many recent reports have indicated that understanding of graphene-cell (or tissue, organ) interactions; particularly the cellular uptake mechanisms are still challenging. Therefore, use of graphene or graphene oxide properly embedded in suitable PLA matrices can positively impact and accelerate the growth, differentiation, and proliferation of stem cells, conceivably minimizing concerns over cytotoxicity of graphene. As such, PLA-graphene composites hold great promise in tissue engineering, regenerative medicine, and in other biomedical fields. However, since PLA is classified as a hard bio-polyester prone to hydrolysis, understanding and engineering of thermo-mechanical properties of PLA-graphene composites are very crucial for such cutting-edge applications. Hence, this review aims to present an overview of current advances in the preparation and applications of PLA-graphene composites and their properties with focus on various biomedical uses such as scaffolds, drug delivery, cancer therapy, and biological imaging, together with a brief discussion on the challenges and perspectives for future research in this field.

The separation of oil from water in emulsions is a great environmental challenge, since oily wastewater is industrially produced. Here, we demonstrate a highly efficient method to separate oil from water in non-stabilized emulsions, using functionalized cellulose fiber networks. This is achieved by the modification of the wetting properties of the fibers, transforming them from oil- and water-absorbing to water-absorbing and oil-proof. In particular, two diverse layers of polymeric coatings, paraffin wax and poly(dimethylsiloxane)-b-poly(ethylene oxide) (PDMS-b-PEO) diblock copolymer, are applied on the surface of each individual fiber by a two-step dip adsorption process. The resulting cellulose networks exhibit superhydrophilicity and underwater superoleophobicity and they are mechanically reinforced. Therefore, the described treatment makes cellulose fiber networks excellent candidates for the filtration and subsequent removal of oil from oil-in-water non-stabilized emulsions with oil separation efficiency up to 99%. The good selectivity, reproducibility, and cost effectiveness of the preparation process leads to the production of low cost filters that can be used in oil–water separation applications.

We report a highly efficient technique to form novel fluoropolymer blend dispersions containing poly(vinylidene fluoride) (PVDF) and a fluorinated acrylic copolymer using a cosolvent system comprising N-methyl-2-pyrrolidone (NMP), acetone, and water under pH control. We also show that certain surface-functionalized, high-aspect-ratio nanostructured materials, such as organoclay and carbon nanowhiskers (CNWs), can be easily dispersed in these fluoropolymer blends to fabricate durable and functional superhydrophobic composite coatings upon spray casting. Both clay and CNW superhydrophobic coatings also repel lower surface tension liquids, such as water–alcohol mixtures (∼40 mN/m). Repellency is characterized using droplet sessile contact angle and contact angle hysteresis. Both clay and CNW-based composite coatings display self-cleaning properties (low contact angle hysteresis) for both water and water–alcohol mixtures. Additionally, electrical conductivity measurement of CNW composite coatings demonstrates the ability to fabricate multifunctional superhydrophobic composites using these fluoropolymer dispersions. The nanoparticle concentration required in these composite coatings for water and water–alcohol repellency is compared with a previously reported PVDF-based coating system. Wettability is interpreted within the framework of the Wenzel and Cassie–Baxter wetting theories. [ABSTRACT FROM AUTHOR]

We report a simple and novel top-down method based on a drop-casting process for the controlled synthesis of all-bone-minerals biomimetic multicomponent bionanocomposites. Integration of micro- and nanoscale binary features into nanofibrous biocompatible polymer scaffold structures is successfully demonstrated. Compositional control of the constituents of the bionanocomposites resulted in uniform dispersion of hydroxyapatite nanospheres (∼100−500 nm) among collagen nanofibers (∼100 nm). The composites also present high calcium and oxygen contents and adequate phosphorus compositions comparable to the levels of bone tissues. Our preliminary results open up further possibilities to develop advanced tissue-engineered bionanocomposites for bone grafting. [ABSTRACT FROM AUTHOR]

An experimental study is presented on contact angle dynamics during spreading/recoiling of mm-sized water droplets impacting orthogonally on various surfaces with $\hbox{\it We}\,{=}\,O(0.1)-O(10)$, $Ca\,{=}\,O(0.001)-O(0.01)$, $\hbox{\it Re}\,{=}\,O(100)-O(1000)$, $Oh\,{=}\,O(0.001)$ and $Bo\,{=}\,O(0.1)$. In this impact regime, inertial, viscous and capillary phenomena act in unison to influence contact angle dynamics. The wetting properties of the target surfaces range from wettable to non-wettable. The experiments feature accelerating and decelerating wetting lines, capillary surface waves in the early impact stages, contact angle hysteresis, and droplet rebound under non-wetting conditions. The objective of the work is to provide insight into the dynamic behaviour of the apparent (macroscopic) contact angle $\theta$ and its dependence on contact line velocity $V_{\hbox{\scriptsize{\it CL}}}$ at various degrees of surface wetting. By correlating the temporal behaviours of $\theta$ and $V_{\hbox{\scriptsize{\it CL}}}$, the angle vs. speed relationship is established for each case examined. The results reveal that surface wettability has a critical influence on dynamic contact angle behaviour. The hydrodynamic wetting theory of Cox (J. Fluid Mech. vol. 357, 1998, p. 249) and the molecular-kinetic theory of wetting by Blake & Haynes (J. Colloid Interface Sci.) vol. 30, 1969, p. 421) are implemented to extract values of the corresponding microscopic wetting parameters required to match the experimentally observed $\theta$vs. $V_{\hbox{\scriptsize{\it CL}}}$ data. Application of hydrodynamic theory indicates that in the slow stage of forced spreading the slip length and the microscopic contact angle should be contact line velocity dependent. The hydrodynamic theory performs well during kinematic (fast) spreading, in which solid/liquid interactions are weak. Application of the molecular kinetic theory yields physically reasonable molecular wetting parameters, which, however, vary with impact conditions. The results indicate that even for a single liquid there is no universal expression to relate contact angle with contact line speed. Finally, analysis of the spreading dynamics on the non-wettable surfaces shows that it conforms to the Cassie-Baxter regime (only partial liquid/solid contact is maintained). The present results offer guidance for numerical or analytical studies, which require careful attention to the implementation of boundary conditions at the moving contact line, including the need to specify the dependence of contact angle on contact line speed. [ABSTRACT FROM AUTHOR]

The photogalvanic effect in electrochemical cells, employing aqueous Methylene blue and Fe(II)/Fe(III) couple electrolyte and nickel-mesh electrodes, were experimentally investigated. Five different standard H-cell configurations were set-up by modifying the electrolyte. Long-term open-circuit voltage measurements were conducted in order to test the stability of the cells. Light on–off reproducibility experiments were also carried out during lengthy cell operations. By comparing experimental quantum yield with theoretical predictions, it was found that the cells operate on differential electrode kinetics. Oxidation of the illuminated electrode was detected. This affected the current–voltage characteristics of the cells after a sufficiently long cell operation. Schottky junction treatment was used to model the electrolyte–electrode junction. After calculating the ratio between the majority carrier (electron) current density and minority carrier (hole) current density, we concluded that the oxidation of the electrodes contributes positively to the cell performance since the electrode–electrolyte interface shows unipolar Schottky diode characteristics. Copyright © 2001 John Wiley & Sons, Ltd. [ABSTRACT FROM AUTHOR]