Search

This paper presents a class comprising three series of Ohmic switches, elucidating their design principles, simulation outcomes and the findings derived from measuring the initial batch of manufactured samples. The design of the membranes employs meandered beams to achieve a small actuation voltage. Initial electro-mechanical simulations, conducted within the Ansys Workbench environment, projected actuation voltages ranging from 5 to 8 Volts, whereas the measured values were marginally higher. The electromagnetic behavior of these devices demonstrated a generally qualitative concordance with simulations performed in the Ansys HFSS environment, exhibiting satisfactory performance in terms of return loss ( < −20.22dB) and isolation ( < −14.86dB) across the 5–30GHz frequency spectrum. [ABSTRACT FROM AUTHOR]

Background: The microfluidic‐based Glomerulus‐on‐Chips (GoC) are mostly cell based, that is, 3D cell culture techniques are used to culture glomerular cells in order to mimic glomerular ultrafiltration. These chips require high maintenance to keep cell viability intact. There have been some approaches to build non‐cell‐based GoCs but many of these approaches have the drawback of membrane fouling. This article presents a structural design and simulation study of a dialysate free microfluidic channel for replicating the function of the human glomerular filtration barrier. The key advancement of the current work is addressing the fouling issue by combining a pre‐filter to eliminate cellular components and performing filtration on the blood plasma. Methods: The Laminar Flow Mixture Model in COMSOL Multiphysics 5.6 has been utilized to simulate the behavior of blood flow in the microchannels. The geometrical effect of microchannels on the separation of the filtrate was investigated. The velocity at the inlet of the microchannel and pore size of the filtration membrane are varied to see the change in outflow and filtration fraction. Results: The efficiency of the device is calculated in terms of the filtration fraction (FF%) formed. Simulation results show that the filtrate obtained is ~20% of the plasma flow rate in the channel, which resembles the glomerular filtration fraction. Conclusion: Given that it is not dependent on the functionality of grown cells, the proposed device is anticipated to have a longer lifespan due to its non‐cell‐based design. The device's cost can be reduced by avoiding cell cultivation inside of it. It can be integrated as a glomerular functional unit with other units of kidney model to build a fully developed artificial kidney. [ABSTRACT FROM AUTHOR]

This paper presents a novel approach to designing beam codebooks for downlink multiuser hybrid multiple-input–multiple-output (MIMO) wireless communication systems, leveraging multi-agent reinforcement learning (MARL). The primary objective is to develop an environment-specific beam codebook composed of non-interfering beams, learned by cooperative agents within the MARL framework. Machine learning (ML)-based beam codebook design for downlink communications have been based on channel state information (CSI) feedback or only reference signal received power (RSRP), consisting of an offline training and user clustering phase. In massive MIMO, the full CSI feedback data is of large size and is resource-intensive to process, making it challenging to implement efficiently. RSRP alone for a stand-alone base station is not a good marker of the position of a receiver. Hence, in this work, uplink CSI estimated at the base station along with feedback of RSRP and binary acknowledgment of the accuracy of received data is utilized to design the beamforming codebook at the base station. Simulations using sub-array antenna and ray-tracing channel demonstrate the proposed system's ability to learn topography-aware beam codebook for arbitrary beams serving multiple user groups simultaneously. The proposed method extends beyond mono-lobe and fixed beam architectures by dynamically adapting arbitrary shaped beams to avoid inter-beam interference, enhancing the overall system performance. This work leverages MARL's potential in creating efficient beam codebooks for hybrid MIMO systems, paving the way for enhanced multiuser communication in future wireless networks. [ABSTRACT FROM AUTHOR]

In this paper, different concepts of reconfigurable RF-MEMS attenuators for beamforming applications are proposed and critically assessed. Capitalizing on the previous part of this work, the 1-bit attenuation modules featuring series and shunt resistors and low-voltage membranes (7–9 V) are employed to develop a 3-bit attenuator for fine-tuning attenuations (<−10 dB) in the 24.25–27.5 GHz range. More substantial attenuation levels are investigated using fabricated samples of coplanar waveguide (CPW) sections equipped with Pi-shaped resistors aiming at attenuations of −15, −30, and −45 dB. The remarkable electrical features of such configurations, showing flat attenuation curves and limited return losses, and the investigation of a switched-line attenuator design based on them led to the final proposed concept of a low-voltage 24-state attenuator. Such a simulated device combines the Pi-shaped resistors for substantial attenuations with the 3-bit design for fine-tuning operations, showing a maximum attenuation level of nearly −50 dB while maintaining steadily flat attenuation levels and limited return losses (<−11 dB) along the frequency band of interest. [ABSTRACT FROM AUTHOR]

This paper describes different variants of broadband and simple attenuator modules for beamforming applications, based on radio frequency micro electro-mechanical systems (RF-MEMS), framed within coplanar waveguide (CPW) structures. The modules proposed in the first part of this work differ in their actuation voltage, topology, and desired attenuation level. Fabricated samples of basic 1-bit attenuation modules, characterized by a moderate footprint of 690 × 1350 µm2 and aiming at attenuation levels of −2, −3, and −5 dB in the 24.25–27.5 GHz range, are presented in their variants featuring both low actuation voltages (5–9 V) as well as higher values (~45 V), the latter ones ensuring larger mechanical restoring force (and robustness against stiction). Beyond the fabrication non-idealities that affected the described samples, the substantial agreement between simulations and measurement outcomes proved that the proposed designs could provide precise attenuation levels up to 40 GHz, ranging up to nearly −3 dB and −5 dB for the series and shunt variants, respectively. Moreover, they could be effective building blocks for future wideband and reconfigurable RF-MEMS attenuators. In fact, in the second part of this work, combinations of the discussed cells and other configurations meant for larger attenuation levels are investigated. [ABSTRACT FROM AUTHOR]

A miniaturized modulated scattering technique (MST) tag able to operate at millimetric frequency bands is proposed in this work. In particular, the proposed tag operates like an RFID tag, but thanks to the MST technique it does not require a radio frequency front end. The information is carried on by modulating an interrogating electromagnetic wave with a suitable change of load impedance of the tag antenna obtained by means of an electronic switch. With respect to standard RFID tags, characterized by limited operative range, MST tags can theoretically reach any distance up to kilometres. In this work, all the components of the MST tag are directly designed on-chip leading to a very compact design. In particular, the tag has been designed to operate at millimetric frequency bands up to 70 GHz. The preliminary experimental results are quite promising, and they demonstrated the capabilities and potentialities of this technique. [ABSTRACT FROM AUTHOR]

Triangular resonators re-shaped into Sierpinski geometry and U-shaped resonators were designed, linking them with single-pole-double-through (SPDT) RF MEMS switches to provide frequency tuning for potential applications in the K-Band. Prototypes of band-stop narrowband filters working around 20 GHz and 26 GHz, interesting for RADAR and satellite communications, were studied in a coplanar waveguide (CPW) configuration, and the tuning was obtained by switching between two paths of the devices loaded with different resonators. As a result, dual-band operation or fine-tuning could be obtained depending on the choice of the resonator, acting as a building block. The studied filters belong to the more general group of devices inspired by a metamaterial design. [ABSTRACT FROM AUTHOR]

Triangular resonators re-shaped with Sierpinski geometry were designed, manufactured, and tested for potential applications in the K-Band. Prototypes of band-stop filters working around 20 GHz and 26 GHz, interesting for RADAR and satellite communications, were studied in a coplanar waveguide (CPW) configuration. Single and coupled structures were analyzed to give evidence for: (i) the tuning of the resonance frequency by increasing the internal complexity of the triangle and (ii) resonance enhancement when coupled structures are considered. The exploited devices were part of the more extended family of metamaterial-inspired structures, and they were studied for their heuristic approach to the prediction of the spectrum using experimental results supported by electromagnetic simulations. As a result, a Sierpinski resonator, not only fed into but also fully embedded into a CPW environment, had a frequency response that was not easily determined by classical theoretical approaches. [ABSTRACT FROM AUTHOR]

This research focuses on enhancing the optical efficacy of organic photovoltaic cells, specifically their optical absorbance and electrical parameters. The absorbance of photons in organic solar cells (OSCs) was studied by incorporating an optical space layer and triple core-shell square-lattice nanostructures. For better chemical and thermal stability, a dielectric-metal-dielectric nanoparticle can be replaced for embedded metallic nanoparticles in the absorption layer. The 3D (finite-difference time-domain) FDTD method was used to analyze the absorption and field distribution in OSCs using 3D model morphology. Firstly, an optimization of thickness of the optical spacer layer was analyzed and secondly, the impact of adding triple core-shell nanostructures at different levels of an OSC were studied. The photovoltaic properties such as short circuit current density, power conversion efficiency, fill factor, Voc were investigated. The proposed design has demonstrated an improvement of up to 80% in the absorption of light radiation in the photoactive region (donor or acceptor) of OSCs in the wavelength range of 400 nm to 900 nm when compared with that of nanostructures proposed at various layers of OSC. [ABSTRACT FROM AUTHOR]

This study discusses the use of a triple material gate (TMG) junctionless tunnel field-effect transistor (JLTFET) as a biosensor to identify different protein molecules. Among the plethora of existing types of biosensors, FET/TFET-based devices are fully compatible with conventional integrated circuits. JLTFETs are preferred over TFETs and JLFETs because of their ease of fabrication and superior biosensing performance. Biomolecules are trapped by cavities etched across the gates. An analytical mathematical model of a TMG asymmetrical hetero-dielectric JLTFET biosensor is derived here for the first time. The TCAD simulator is used to examine the performance of a dielectrically modulated label-free biosensor. The voltage and current sensitivity of the device and the effects of the cavity size, bioanalyte electric charge, fill factor, and location on the performance of the biosensor are also investigated. The relative current sensitivity of the biosensor is found to be about 1013. Besides showing an enhanced sensitivity compared with other FET- and TFET-based biosensors, the device proves itself convenient for low-power applications, thus opening up numerous directions for future research and applications. [ABSTRACT FROM AUTHOR]

The emerging paradigms of Beyond-5G (B5G), 6G and Future Networks (FN), will capsize the current design strategies, leveraging new technologies and unprecedented solutions. Focusing on the telecom segment and on low-complexity Hardware (HW) components, this contribution identifies RF-MEMS, i.e., Radio Frequency (RF) passives in Microsystem (MEMS) technology, as a key-enabler of 6G/FN. This work introduces four design concepts of RF-MEMS series ohmic switches realized in a surface micromachining process. S-parameters (Scattering parameters) are measured and simulated with a Finite Element Method (FEM) tool, in the frequency range from 100 MHz to 110 GHz. Based on such a set of data, three main aspects are covered. First, validation of the FEM-based modelling methodology is carried out. Then, pros and cons in terms of RF characteristics for each design concept are identified and discussed, in view of B5G, 6G and FN applications. Moreover, ad hoc metrics are introduced to better quantify the S-parameters predictive errors of simulated vs. measured data. In particular, the latter items will be further exploited in the second part of this work (to be submitted later), in which a discussion around compact modelling techniques applied to RF-MEMS switching concepts will also be included. [ABSTRACT FROM AUTHOR]

U-shaped microwave resonators implemented by RF MEMS switches can be considered the result of a novel design approach for obtaining small-footprint tunable resonators, owing to the bent shape of the resonator and the microsystem solution for changing the frequency of resonance. In this paper, we discuss the design approach for potential configurations of U-shaped structures combined with ohmic RF MEMS switches. Owing to their prospective application in RADAR and satellite systems, the devices were assessed for K-Band operation, specifically for 15 GHz, 20 GHz, and 26 GHz. The ON-OFF states determined by an electrostatic actuation of metal beams composing the RF MEMS ohmic switches allow for selecting different path lengths corresponding to different frequencies. In this contribution, initial configurations were designed and manufactured as a proof-of-concept. The advantages and critical aspects of the designs are discussed in detail. [ABSTRACT FROM AUTHOR]

This work presents a bandpass-reconfigurable planar pseudohairpin filter based on RF-MEMS switches. Hairpin-line structures are preferred to design microstrip filters because this class of filters offers a more compact size, and, in general, hairpin filters do not need ground connections for resonators. In this work, the U-shape resonators are arranged to obtain an interdigit capacitor to improve the coupling between the resonators. RF-MEMS switches modify the lengths of coupled resonators by adding microstrip segments to control the filter bandwidth, moving the center frequency and the return loss. An experimental hairpin tunable filter prototype based on RF-MEMS has been designed, fabricated, numerically and experimentally assessed, and compared concerning its tunability, quality factor, and capability with standard tunable filters based on PIN diodes. In conclusion, the tunable hairpin filter based on RF-MEMS switches offers the best performance in center frequency tuning range, compactness, and power consumption regarding reconfigurable filters based on standard PIN diodes switches. The obtained results are appealing and demonstrate the capabilities and potentialities of RF-MEMS to operate with the new communication standards that work at high microwave frequency bands. [ABSTRACT FROM AUTHOR]

In this paper, new suspended-membrane double-ohmic-contact RF-MEMS switch configurations are proposed. Double-diagonal (DDG) beam suspensions, with either two or three anchoring points, are designed and optimized to minimize membrane deformation due to residual fabrication stresses, thus exhibiting smaller mechanical deformation and a higher stiffness with more release force than previously designed single diagonal beam suspensions. The two-anchor DDGs are designed in two different orientations, in-line and 90°-rotated. The membrane may include a window to minimize the coupling to the lower electrode. The devices are integrated in a coplanar-waveguide transmission structure and fabricated using an eight-mask surface-micro-machining process on high-resistivity silicon, with dielectric-free actuation electrodes, and including glass protective caps. The RF-MEMS switch behavior is assessed from measurements of the device S parameters in ON and OFF states. The fabricated devices feature a measured pull-in voltage of 76.5 V/60 V for the windowed/not-windowed two-anchor DDG membranes, and 54 V/49.5 V for the windowed/not-windowed three-anchor DDG membranes, with a good agreement with mechanical 3D simulations. The measured ON-state insertion loss is better than 0.7 dB/0.8 dB and the isolation in the OFF state is better than 40 dB/31 dB up to 20 GHz for the in-line/90°-rotated devices, also in good agreement with 2.5D electromagnetic simulations. [ABSTRACT FROM AUTHOR]

This paper proposes a monostable nonlinear Piezoelectric Energy Harvester (PEH). The harvester is based on an unconventional exsect-tapered fixed-guided spring design, which introduces nonlinearity into the system due to the bending and stretching of the spring. The physical–mathematical model and finite element simulations were performed to analyze the effects of the stretching-induced nonlinearity on the performance of the energy harvester. The proposed exsect-tapered nonlinear PEH shows a bandwidth and power enhancement of 15.38 and 44.4%, respectively, compared to conventional rectangular nonlinear PEHs. It shows a bandwidth and power enhancement of 11.11 and 26.83%, respectively, compared to a simple, linearly tapered and nonlinear PEH. The exsect-tapered nonlinear PEH improves the power output and operational bandwidth for harvesting low-frequency ambient vibrations. [ABSTRACT FROM AUTHOR]

Recently wireless sensors based on modulated scattering techniques (MST) have been applied to different practical scenarios demonstrating their capabilities. A particular configuration of the MST sensor antenna permits to retrieve the electric characteristics of the media which surround the antenna tag. Thanks to the capability of MST probes to retrieve the dielectric characteristics of the surrounding media, MST probes can be applied efficiently for biomedical applications. The development of MST sensors working at microwave frequency bands require the development of suitable and expensive RF switches, to avoid this problem RF‐MEMS microwave switches could be considered. In this work the use of a customized SP3T MEMs for MST probes has been considered. Thanks to the MEMs switch an MST probe can be developed considering reduced dimensions, complexity, and good performances up to high frequency bands. In particular, an MST system able to transmit data and the dielectric characteristics of the surrounding media through a wireless channel has been designed, fabricated, and experimentally assessed. The obtained experimental results demonstrated the capabilities of MST probes as miniaturized biomedical sensors. [ABSTRACT FROM AUTHOR]

The use of RF microelectromechanical systems (RF-MEMS) switches for the design of broadband modulated scattering techniques (MSTs) wireless sensors has been investigated in this letter. In an MST sensor, the antenna is loaded with different resistive loads to produce a modulation in the backscattered field by means of an electronic switch. At microwave frequency bands, the RF switches are quite expensive, moreover, they are quite narrowband. The narrowband behavior of MST sensors is one of their major drawbacks. The adoption of RF-MEMS microwave switches could be a good opportunity to overcome this problem. In particular, MEMS switches are able to perform good up to 110 GHz with a reduced dimension and complexity. In this letter, an MST sensor prototype based on MEMS switches and able to work in the whole X-band from 8 to 12 GHz has been designed, fabricated, and experimentally assessed. The obtained results are quite good and they demonstrate the feasibility of such kind of sensors. In particular, the MEMS switches demonstrate that they could play a key role for the design of millimetric and submillimetric frequencies bands MST sensors, where the standard microwave switches technologies cannot operate. [ABSTRACT FROM AUTHOR]

This work aims to build inclusive vision of the Internet of Things (IoT), Internet of Everything (IoE), Tactile Internet and 5G, leveraging on MEMS technology, with focus on Energy Harvesters (EH-MEMS) and Radio Frequency passives (RF-MEMS). The IoT is described, stressing the pervasivity of sensing/actuating functions. High-level performances 5G will have to score are reported. Unifying vision of the mentioned paradigms is then built. The IoT evolves into the IoE by overtaking the concept of thing . Further step to Tactile Internet requires significant reduction in latency, it being enabled by 5G. The discussion then moves closer to the hardware components level. Sets of specifications driven by IoT and 5G applications are derived. Concerning the former, the attention is concentrated on typical power requirements imposed by remote wireless sensing nodes. Regarding the latter, a set of reference specifications RF passives will have to meet in order to enable 5G is developed. Once quantitative targets are set, a brief state of the art of EH-MEMS and RF-MEMS solutions is developed, targeting the IoT and 5G, respectively. In both scenarios, it will be demonstrated that MEMS are able to address the requirements previously listed, concerning EH from various sources and RF passive components. In conclusion, the frame of reference depicted in this work outlines a relevant potential borne by EH-MEMS and RF-MEMS solutions within the unified scenario of IoT, IoE, Tactile Internet and 5G, making the forecast of future relentless growth of MEMS-based devices, more plausible and likely to take place. [ABSTRACT FROM AUTHOR]

This paper presents the fabrication and electromechanical characterization of a novel AlN-based microelectromechanical systems (MEMS) flexural-mode piezoelectric transformer (PT) realized in a silicon-on-insulator bulk-micromachining process with segmented electrodes at the secondary side, which are series-connected in order to increase the output voltage. The goal of this work is to propose a MEMS-based alternative to inductors and magnetic transformers for power management in micro-power mm-scale electronic systems. The fabricated device is fully modeled by means of the Butterworth-Van Dyke (BVD) two-port network. The device is modeled analytically with the classic equations of a fully clamped-edge membrane and through finite-element method simulations. Characterization is performed through impedance measurements and an alternative empirical method suitable for MEMS devices is proposed for directly extracting its lumped parameters electromechanical circuit. Finally, the effect of the feed-through capacitance is fully analytically modeled, and this paper presents a variant of the BVD network of the PT with an inner BVD circuit, allowing an easier estimation of the effects of the complex zeros introduced by the feed-forward capacitance. The presented device achieves a measured maximum voltage gain of 58mV/V at ~36.3 kHz and maximum efficiency of ~75%. [ABSTRACT FROM AUTHOR]