Search

The application of ion-beam milling techniques to clays allows investigation of the porosity at nm resolution using scanning electron microscopy (SEM). Imaging of pores by SEM of surfaces prepared by broad ion beam (BIB) gives both qualitative and quantitative insights into the porosity and mineral fabrics in 2D representative cross-sections. The combination of cryogenic techniques with ion-beam milling preparation (BIB and FIB, focused ion beam) allows the study of pore fluids in preserved clay-rich samples. Characterization of the pore network is achieved, first, using X-ray computed tomography to provide insights into the largest pore bodies only, which are generally not connected at the resolution achieved. Secondly, access to 3D pore connectivity is achieved by FIB-SEM tomography and the results are compared with 2D porosity analysis (BIBSEM) and correlated with bulk porosity measurements (e.g. mercury injection porosimetry, MIP). Effective pore connectivity was investigated with an analog of MIP based on Wood’s metal (WM), which is solid at room temperature and allows microstructural investigation of WM-filled pores with BIB-SEM after injection. Combination of these microstructural investigations at scales of ,1 mm with conventional stressstrain data, and strain localization characterized by strain-fields measurement (DIC – digital image correlation) on the same sample offers a unique opportunity to answer the fundamental questions: (1) when, (2) where, and (3) how the sample was deformed in the laboratory. All the methods above were combined to study the microstructures in naturally and experimentally deformed argillites. Preliminary results are promising and leading toward better understanding of the deformation behavior displayed by argillites in the transition between rocks and soils.

The application of ion-beam milling techniques to clays allows investigation of the porosity at nm resolution using scanning electron microscopy (SEM). Imaging of pores by SEM of surfaces prepared by broad ion beam (BIB) gives both qualitative and quantitative insights into the porosity and mineral fabrics in 2D representative cross-sections. The combination of cryogenic techniques with ion-beam milling preparation (BIB and FIB, focused ion beam) allows the study of pore fluids in preserved clay-rich samples. Characterization of the pore network is achieved, first, using X-ray computed tomography to provide insights into the largest pore bodies only, which are generally not connected at the resolution achieved. Secondly, access to 3D pore connectivity is achieved by FIB-SEM tomography and the results are compared with 2D porosity analysis (BIBSEM) and correlated with bulk porosity measurements (e.g. mercury injection porosimetry, MIP). Effective pore connectivity was investigated with an analog of MIP based on Wood’s metal (WM), which is solid at room temperature and allows microstructural investigation of WM-filled pores with BIB-SEM after injection. Combination of these microstructural investigations at scales of ,1 mm with conventional stressstrain data, and strain localization characterized by strain-fields measurement (DIC – digital image correlation) on the same sample offers a unique opportunity to answer the fundamental questions: (1) when, (2) where, and (3) how the sample was deformed in the laboratory. All the methods above were combined to study the microstructures in naturally and experimentally deformed argillites. Preliminary results are promising and leading toward better understanding of the deformation behavior displayed by argillites in the transition between rocks and soils.

The current project-based carbon market mechanisms such as the Clean Development Mechanism (CDM) and the Joint Implementation (JI) do not have a direct impact on global greenhouse gas emission levels, because they only replace or offset emissions. Nor do they contribute to host country׳s national greenhouse gas emission reduction targets. Contributions to net emission reductions in host countries is likely to become mandatory in new mechanisms under development such as in the framework for various approaches, a new market-based mechanism and even in a reformed JI. This research analysed the question if approaches for carbon market-based mechanisms exist that allow the generation of net emission reductions in host countries while keeping project initiation attractive. We present a criteria-based assessment method and apply it for four generic options in existing mechanisms and derive implications for future mechanism frameworks. We identified the application of “discounts” on the amount of avoided emissions for the issuance of carbon credits and “standardisation below business as usual” as most promising options over “limiting the crediting period” and “over-conservativeness”. We propose to apply these options differentiated over project types based on internal rate of return to ensure cost-efficiency and attractiveness.