Search

This paper presents the experimental design and results for gold rod impact on DEDF (5.19g/cm(sup 3)) and Borofloat (2.2g/cm(sup 3)) glass by visualizing simultaneously failure propagation in the glass with a high-speed camera and rod penetration with flash radiography. At a given impact velocity, the velocity of the failure front is significantly higher during early penetration than during steady-state penetration of the rod. For equal pressures but different stress states, the failure front velocities determined from Taylor tests or planar-impact tests are greater than those observed during steady-state rod penetration. The ratio of average failure front velocity to rod penetration velocity decreases with increasing impact velocity (vp) in the range of v(sub p) = 0.4-2.8 km/s. As a consequence, the distance between the rod tip and the failure front is reduced with increasing vp. The Tate term RT increases with impact velocity

On the occasion of the Distinguished Scientist Award presentation at HVIS 1992, the technical and scientific promotion of the Impact Physics Division at EMI in the field of aeroballistics, free flight dynamics, terminal ballistics and impact physics is described. This development is closely related to the work of the recipients. The activities began in the late fifties when a small pressurized ballistic range with a gas gun was built. The problems to construct a well working facility with observation stations are reported that arose, at those early times, from the lack of experience, money and suitable locations. In the mid-sixties, the experimental possibilities were extended by building a two-stage light gas gun that could also be used as a gun tunnel. These facilities have been the foundation for research in the field of free flight aerodynamics, such as the study of near and far wakes behind a blunt hypersonic body or the study of shock wave boundary layer interactions. In 1972, th e division took the first step into terminal ballistics and, because of increasing interest, impact physics became the main research area. The division grew and with it the instrumentation. Today, diverse gas guns, powder guns and two-stage light gas guns are in operation. One topic of main interest during the years has been the penetration of rod shaped projectiles. Here the best-known result may be mentioned, the so-called 'Hohler-Stilp S-shaped penetration curves`. In addition to this, many other topics have been investigated that can be summarized under the title "penetration mechanics and impact physics". Based on a well developed launching technique and instrumentation, problems were investigated at low velocities of a few hundred m/s, at ordnance velocities and especially at hypervelocities up to 10 km/s. It has been recognized that dynamic material behavior and microstructural effects play an important role in understanding the interaction of projectiles with targets. Therefore , a VISAR, an electronic raster microscope, a Hopkinson bar and further equipment have been installed. Basing on the work of a period of more than 20 years, EMI has come into contact with national and foreign institutions and has become a partner for many cooperations.

The penetration behavior of tungsten alloy, long-rod penetrators into high-hard steel is investigated at two impact velocities; 1.25 km/s and 1.70 km/s. The positions of the nose and tail of the projectile were measured by means of 600 kV flash X-ray system at different times during penetration. The wavecode CTH was used to numerically simulate the experiments. The computational results are in very good agreement with the experimental position-time data. Additionally, the computational model reproduces the qualitative behavior for impact conditions near the ballistic limit.