Search

Chromium, being among the most toxic heavy metals, continues to demand immediate attention in the remediation of Cr-contaminated environments. In this study, a strain of LBA36 (Bacillus toyonensis) was isolated from heavy metal contaminated soil in Luanchuan County, Luoyang City, China. The reduction and adsorption rates of LBA36 in 30 mg·L−1 Cr-containing medium were 97.95% and 8.8%, respectively. The reduction mechanism was confirmed by Fourier-transform infrared spectroscopy, and X-ray photoelectron spectroscopy (XPS). Cr(VI) reduction by this strain predominantly occurred outside the cell, with hydroxyl, amide, carboxyl, C-N group, carbonyl, and sulfur carbonyl as the main reaction sites. XPS analysis revealed the presence of Cr2p1/2 and Cr2p3/2. Furthermore, the hydroponic experiment showed that the fresh weight and plant height of radish seedlings increased by 87.87% and 37.07%, respectively, after inoculation with LBA36 strain under 7 mg·L−1 Cr(VI) stress. The levels of chlorophyll, total protein, malondialdehyde, superoxide dismutase and catalase were also affected to different degrees. In conclusion, this study demonstrated the potential of microbial and phytoremediation in the treatment of heavy metal toxicity, and laid the foundation for the development of effective bioremediation methods for Cr(VI) pollution.

Abstract Conventional liquid-phase methods lack precise control in synthesizing and processing materials with macroscopic sizes and atomic thicknesses. Water interfaces are ubiquitous and unique in catalyzing many chemical reactions. However, investigations on two-dimensional (2D) materials related to water interfaces remain limited. Here we report the growth of millimeter-sized 2D PbI2 single crystals at the water-air interface. The growth mechanism is based on an inherent ion-specific preference, i.e. iodine and lead ions tend to remain at the water-air interface and in bulk water, respectively. The spontaneous accumulation and in-plane arrangement within the 2D crystal of iodide ions at the water-air interface leads to the unique crystallization of PbI2 as well as other metal iodides. In particular, PbI2 crystals can be customized to specific thicknesses and further transformed into millimeter-sized mono- to few-layer perovskites. Additionally, we have developed water-based techniques, including water-soaking, spin-coating, water-etching, and water-flow-assisted transfer to recycle, thin, pattern, and position PbI2, and subsequently, perovskites. Our water-interface mediated synthesis and processing methods represents a significant advancement in achieving simple, cost-effective, and energy-efficient production of functional materials and their integrated devices.

The effects of heat treatment on the intermetallic compounds (IMCs) and morphology at the interface of stainless steel 304 bonded to aluminum 6061 by electromagnetic pulse welding (EMPW) were investigated in this study. A thin discontinuous non-uniform wavy transition layer with an average thickness of 1.144 μm was formed at the interface of the as-welded joint. After heat treatment, the average grain size of the Al/SS304 interface grew from 6.85 μm to 7.42 μm. The thickness of the transition layer increased significantly, reaching an average thickness of 4.109 μm after heating at 210 °C for 4 h. In addition, the wavy interface grew gradually and became smooth with increasing heating temperature, suggesting the growth rate of the IMCs at the trough was greater than that at the adjacent crest. Then the effect of heating time on the growth of IMCs was studied. According to the characteristics of the transition layer and the diffusion law, the IMCs grew faster at the trough than at the crest of the transition layer. Differences in element concentration, crystal deformation, grain boundaries, dislocation density, and energy storage were observed at the trough and crest of the interface as a result of the different growth rates of the IMCs.

The pumping station is one of the critical parts of the hydraulic structure in China. Traditional forecasting methods are limited in accuracy, time-consuming, and high cost, resulting in limited data availability. Therefore, simulation model analysis based on soft computation is a realistic and valuable alternative. This article intends to use the BP neural network to predict the safe operation status of pump stations and optimize the initial threshold and weight information of the BP network using the sparrow search algorithm (SSA) to improve the accuracy and generalization ability of the model. In addition, to more accurately reflect the correlation between various influencing factors and the safe operation status of the pumping station, the entropy weight method and the analytic hierarchy process were used to obtain the comprehensive weights of each main influencing factor. The experimental results show that the SSA-BP model can accurately predict the safe operation status of pumping stations, and compared with other traditional models, the SSA-BP model has better convergence and higher accuracy. This model provides a new approach for predicting the safe operation of pumping stations and has particular reference significance for predicting the safe operation of other pumping stations.

Loss of Smad3 and the consequent activation of myocardin-related transcription factor (MRTF) are associated with vascular pathologies. This study aimed to examine the impact of persistent hypoxia with intermittent aggravation (PI hypoxia) on cellular senescence and pulmonary arterial remodeling mediated by the Smad3/MRTF imbalance. We examined the effects of PI hypoxia on the Smad3/MRTF pathway and cellular senescence using human pulmonary artery endothelial cells (HPAECs) and in vivo studies in rats. The senescent degree was evaluated using β-galactosidase staining, p16 quantitation and the measurement of senescence-associated secretory phenotype. Structural data in the pathological analysis of pulmonary artery remodeling were collected. Compared to the control, HPAECs and pulmonary tissue from rats exposed to PI hypoxia showed a significantly higher senescent degree, lower expression of Smad3, and higher MRTF levels. The overexpression of Smad3 significantly mitigated HPAECs senescence in vitro. Further, treatment with CCG-203971, which inhibits MRTF, increased Smad3 levels and reduced β-galactosidase positive cells in rat lung tissue. This intervention also alleviated PI hypoxia-induced pathological changes, including remodeling indices of pulmonary arterial thickening, muscularization, and collagen formation. In conclusion, imbalanced Smad3/MRTF signaling is linked to PI hypoxia-induced senescence and pulmonary arterial remodeling, making it a potential therapeutic target for patients with sleep apnea and chronic obstructive pulmonary disease.

Topography and soil factors are known to play crucial roles in the species composition of plant communities in subtropical evergreen-deciduous broadleaved mixed forests. In this study, we used a systematic quantitative approach to classify plant community types in the subtropical forests of Hubei Province (central China), and then quantified the relative contribution of drivers responsible for variation in species composition and diversity. We classified the subtropical forests in the study area into 12 community types. Of these, species diversity indices of three communities were significantly higher than those of others. In each community type, species richness, abundance, basal area and importance values of evergreen and deciduous species were different. In most community types, deciduous species richness was higher than that of evergreen species. Linear regression analysis showed that the dominant factors that affect species composition in each community type are elevation, slope, aspect, soil nitrogen content, and soil phosphorus content. Furthermore, structural equation modeling analysis showed that the majority of variance in species composition of plant communities can be explained by elevation, aspect, soil water content, litterfall, total nitrogen, and total phosphorus. Thus, the major factors that affect evergreen and deciduous species distribution across the 12 community types in subtropical evergreen-deciduous broadleaved mixed forests include elevation, slope and aspect, soil total nitrogen content, soil total phosphorus content, soil available nitrogen content and soil available phosphorus content.

In Underwater Wireless Sensor Networks (UWSNs), data should be transmitted to data centers reliably and efficiently. However, due to the harsh channel conditions, reliable data transmission is a challenge for large-scale UWSNs. Thus, opportunistic routing (OR) protocols with high reliability, strong robustness, low end-to-end delay, and high energy efficiency are widely applied. However, OR in UWSNs is vulnerable to routing attacks. For example, sinkhole attack nodes can attract traffic from surrounding nodes by forging information such as the distance to the sink node. In order to reduce the negative impact of malicious nodes on data transmission, we propose an intrusion detection scheme (IDS) based on the Density-Based Spatial Clustering of Applications with Noise (DBSCAN) clustering algorithm for OR (DOIDS) in this paper. DOIDS is based on small-sample IDS and is suitable for UWSNs with sparse node deployment. In DOIDS, the local monitoring mechanism is adopted. Every node in the network running DOIDS can select the trusted next hop. Firstly, according to the behavior characteristics of common routing attack nodes and unreliable underwater acoustic channel characteristics, DOIDS selected the energy consumption, forwarding, and link quality information of candidate nodes as the detection feature values. Then, the collected feature information is used to detect potential abnormal nodes through the DBSCAN clustering algorithm. Finally, a decision function is defined according to the time decay function to reduce the false detection rate of DOIDS. It makes a final judgment on whether the potential abnormal node is malicious. The simulation results show that the algorithm can effectively improve the detection accuracy rate (3% to 15% for different scenarios) and reduce the false positive rate, respectively.

Diachasmimorpha longicaudata is the most widely used endoparasitoid in biocontrol programmes against various species of tephritids and is continuously mass-reared under laboratory conditions at a constant temperature; however, little is known about how varying the temperature might affect the effectiveness of the mass rearing of immature D. longicaudata. This study aimed to determine the optimum temperature for the development of larvae D. longicaudata the larvae of its host, Bactrocera dorsalis. Third-instar B. dorsalis were exposed for 4 h to five pairs of parasitoids, and then they were kept at one of six temperatures ranging from 19°C to 34°C. The activities of three major antioxidant enzymes (CAT, POX, SOD) were individually measured 4, 24, 48 and 72 h after exposure to each of the six temperatures. The results were as follows: for CAT the highest CAT activities were recorded at 25°C (intervals 5-24 h and 25-48 h), at 28°C (interval 0-4 h) and at 31°C (interval 49-72 h), and for POX and SOD identically at 25°C (intervals 0-4 h, 5-24 h) and at 31°C (intervals 25-48 h, 49-72 h), respectively. Subsequently, the effects keeping the parasitized larvae at these different temperatures on the biological attributes of D. longicaudata reared under laboratory conditions were investigated. The percentage of their eggs that hatched, percentage of adults that emerged, pupal weight and longevity were significantly greater than that recorded for the control when the parasitized host larvae were kept at 28°C for 4 h, 25°C for 5 and 48 h and 31°C for 49 and 72 h.

Graphene combines high conductivity (sheet resistance down to a few hundred Ω/sq and even less) with high transparency (>90%) and thus exhibits a huge application potential as a transparent conductive electrode in gallium nitride (GaN)-based light-emitting diodes (LEDs), being an economical alternative to common indium-based solutions. Here, we present an overview of the state-of-the-art graphene-based transparent conductive electrodes in GaN-based LEDs. The focus is placed on the manufacturing progress and the resulting properties of the fabricated devices. Transferred as well as directly grown graphene layers are considered. We discuss the impact of graphene-based transparent conductive electrodes on current spreading and contact resistance, and reveal future challenges and perspectives on the use of graphene in GaN-based LEDs.

Redox-based resistive memory cells exhibit changes of OFF or intermediate resistance values over time and even ON states can be completely lost in certain cases. The stability of these resistance states and the time until resistance loss strongly depends on the materials system. On the basis of electrical measurements and chemical analysis we found a viable explanation for these volatile resistance states (VRSs) in Ag-GeSx-based electrochemical metallization memory cells and identified a technological application in the field of crossbar memories. Complementary resistive switches usually suffer from the necessity of a destructive read-out procedure increasing wear and reducing read-out speed. From our analysis we deduced a solution to use the VRS as an inherent selector mechanism without the need for additional selector devices. [ABSTRACT FROM AUTHOR]

Diachasmimorpha longicaudata is the most widely used endoparasitoid in biocontrol programmes against various species of tephritids and is continuously mass-reared under laboratory conditions at a constant temperature; however, little is known about how varying the temperature might affect the effectiveness of the mass rearing of immature D. longicaudata. This study aimed to determine the optimum temperature for the development of larvae D. longicaudata the larvae of its host, Bactrocera dorsalis. Third-instar B. dorsalis were exposed for 4 h to five pairs of parasitoids, and then they were kept at one of six temperatures ranging from 19°C to 34°C. The activities of three major antioxidant enzymes (CAT, POX, SOD) were individually measured 4, 24, 48 and 72 h after exposure to each of the six temperatures. The results were as follows: for CAT the highest CAT activities were recorded at 25°C (intervals 5-24 h and 25-48 h), at 28°C (interval 0-4 h) and at 31°C (interval 49-72 h), and for POX and SOD identically at 25°C (intervals 0-4 h, 5-24 h) and at 31°C (intervals 25-48 h, 49-72 h), respectively. Subsequently, the effects keeping the parasitized larvae at these different temperatures on the biological attributes of D. longicaudata reared under laboratory conditions were investigated. The percentage of their eggs that hatched, percentage of adults that emerged, pupal weight and longevity were significantly greater than that recorded for the control when the parasitized host larvae were kept at 28°C for 4 h, 25°C for 5 and 48 h and 31°C for 49 and 72 h. [ABSTRACT FROM AUTHOR]