Search

Lubricating greases are an important class of lubricants to reduce wear and friction in moving components. SP [ sp [[1]] SP ] sp Greases consist of a thickener network which includes base oil and additives of typically low molecular weight. As expected, signals from base oil molecules, thickeners and the alkyl chains of additives were clearly detected in the SP 1 sp H-NMR spectra at 80 MHz. This reveals that additives have a strong influence on the interaction of base oil and thickener and might also affect the thickener and its structure. [Extracted from the article]

Ceramic hollow fiber membranes are investigated with respect to the fouling behavior. Constant pressure dead-end filtration experiments have been performed using alginate as model substance for extracellular polymeric substances. In addition to the evaluation of the filtration data using conventional cake filtration model, nuclear magnetic resonance imaging (MRI) was used to elucidate the influence of Ca2+ on the fouling layer structure for alginate filtration within ceramic hollow fiber membranes. To visualize the alginate layers inside the opaque ceramic hollow fiber membranes by means of MRI, specific contrast agents were applied. Supplementary to multi slice multi echo imaging, flow velocity measurements were performed to gain more insight into the hydrodynamics in the fouled membranes. MRI reveals the structure of the alginate layers with the finding that the addition of Ca2+ to the alginate feed solution promotes the formation of a dense alginate gel layer on the membrane's surface. © 2016 American Institute of Chemical Engineers AIChE J, 62: 2459-2467, 2016 [ABSTRACT FROM AUTHOR]

Biofilm formation during ultrafiltration membrane operation was investigated by Compressed Sensing Magnetic Resonance Imaging (MRI), with tryptic soy broth included in the feed stream to stimulate microbial growth. Biofilm development was visualized as growing layer characterized by reduced T 1 relaxation time, and its progression as monitored by MRI was compared with classical integral filtration parameters such as permeate flux J , transmembrane pressure Δ p and permeability L p to document fouling behavior. Over three days of growth a change in the filtration process could be observed in both measurements, with L p decreasing dramatically over time as the surface-associated biofilm increased in thickness. Following cessation of filtration and the associated drop in Δ p , the biofilm detached from the lumen wall and dispersed throughout the feed channel. Compressed Sensing MRI velocity and intensity measurements facilitate fast imaging during filtration processes, providing new possibilities for the investigation of biofouling in filtration membranes. Image 1 • Biofouling in multichannel hollow fiber membranes is characterized in-situ by MRI. • Biofouling was stimulated with tryptic soy broth in the feed solution. • T 1 -contrast images track biofilm development inside the membrane channels. • Velocity images allow the characterization of flow during filtration. • Compressed Sensing (CS) considerably reduces measurement time. [ABSTRACT FROM AUTHOR]

Highlights • NMR monitors oil degradation by relaxation and diffusion. • Quality control of oils can be achieved by low field NMR. • Fast field cycling as well as single-sided NMR allow to study oil aging. Abstract Time domain, also named lowfield nuclear magnetic resonance is used to monitor oil degradation by measuring relaxation and diffusion. As quality control of oils is indispensable to optimize oil change intervals while simultaneously preventing machinery damage, the technique was applied to detect the degradation state of engine oils as time domain nuclear magnetic resonance is known as a well suited tool to measure quality control parameters for example in food industry. Correlations with commonly applied oil analytics like viscosity measurements and inductively coupled plasma optical emission spectrometry allow to interpret relaxation and diffusion data in detail and finally to deepen the understanding of oil aging processes. Additionally, the measurement temperature was varied to achieve the maximum sensitivity towards oil aging. Low field NMR is not only realized in form of table top instruments, but also in form of field cycling and single sided NMR devices. Fast field cycling as well as single-sided NMR were also explored to study oil aging and to provide valuable insight. The latter device was used to obtain information about translational diffusion and transverse relaxation of oils simultaneously. [ABSTRACT FROM AUTHOR]

Abstract Polymeric multichannel hollow fiber membranes were developed to reduce fiber breakage and to increase the volume-to-membrane-surface ratio and consequently the efficiency of filtration processes. These membranes are commonly used in ultrafiltration and are operated in in-out dead-end mode. However, some of the filtration details are unknown. The filtration efficiency and flow in the multichannel membranes depend on filtration time and are expected to vary along spatial coordinates. In the current work, in-situ magnetic resonance imaging was used to answer these questions. Velocities were quantified in the feed channels to obtain a detailed understanding of the filtration process. Flow and deposits were measured in each of the seven channels during filtration of sodium alginate, which is a model substance for extracellular polymeric substances occurring in water treatment. Volume flow and flow profiles were calculated from phase contrast flow images. The flow in z -direction in the center channel was higher than in the surrounding channels. Flow profiles variate depending on the concentration of Ca2+, which changes the filtration mechanism of aqueous solutions of sodium alginate from concentration polarization to gel layer filtration. Graphical abstract fx1 Highlights • Filtrations of alginate solutions in multichannel hollow fiber membranes are characterized in-situ by MRI. • Image contrast in structural images is generated by paramagnetic contrast agents. • The filtration characteristics are changing from concentration polarization to gel layer fouling in the presence of Ca2+. • Volume flow and flow profiles in every single channel are analyzed to investigate filtration characteristics. [ABSTRACT FROM AUTHOR]

O/W/O double emulsions are studied by means of 1 H nuclear magnetic resonance (NMR) and confocal laser scanning microscopy (CLSM) with respect to their structural and diffusion properties. Due to the structure of double emulsions, common droplet sizing techniques such as laser scattering methods show limited applicability, especially with respect to the inner droplet size distribution and dynamic effects on the molecular level. However, geometrical and structural information can be extracted from pulsed field gradient stimulated echo (PFG-STE) NMR measurements, as the molecules in the different phases experience hindered and restricted diffusion due to the interfaces. Additionally, the permeability of the interfaces and the diffusion across the intermediate (hetero) phase can be observed either by PFG-STE NMR or by exploiting the possibilities of paramagnetic relaxation enhancement. The NMR results are confirmed by CLSM with respect to both the droplet size distribution and the exchange of molecules in this publication especially for the O/W/O type of double emulsions. [ABSTRACT FROM AUTHOR]

The longitudinal and transverse nuclear magnetic resonance relaxivity dispersion (NMRD) of 1 H in water induced by the paramagnetic relaxation enhancement (PRE) of dissolved lanthanide ions (Ln 3+ ) can become very strong. Longitudinal and transverse 1 H NMRD for Gd 3+ , Dy 3+ , Er 3+ and Ho 3+ were measured from 20 MHz/0.47 T to 1382 MHz/32.5 T, which extended previous studies by a factor of more than two in the frequency range. For the NMRD above 800 MHz, we used a resistive magnet, which exhibits reduced field homogeneity and stability in comparison to superconducting and permanent NMR magnets. These drawbacks were addressed by dedicated NMRD methods. In a comparison of NMRD measurements between 800 MHz and 950 MHz performed in both superconducting and resistive magnets, it was found that the longitudinal relaxivities were almost identical. However, the magnetic field fluctuations of the resistive magnet strongly perturbed the transverse relaxation. The longitudinal NMRDs are consistent with previous work up to 600 MHz. The transverse NMRD nearly scales with the longitudinal one with a factor close to one. The data can be interpreted within a PRE model that comprises the dipolar hyperfine interactions between the 1 H and the paramagnetic ions, as well as a Curie spin contribution that is dominant at high magnetic fields for Dy 3+ , Er 3+ and Ho 3+ . Our findings provide a solid methodological basis and valuable quantitative insights for future high-frequency NMRD studies, enhancing the measurement accuracy and applicability of PRE models for paramagnetic ions in aqueous solutions.

Quality control in a production plant shows its maximum potential in the form of inline measurements. Defects and imperfections can be detected early and directly, and waste and costs can be reduced. Nuclear Magnetic Resonance offers a wide range of applications but requires dedicated adaptation to the respective process and material conditions. A V-shaped low-field NMR sensor was developed for non-invasive inline measurements on anode slurries in a battery production plant. In battery production, inline monitoring of the quality of anode slurries is demanded, offering the possibility of predictive control of the following process steps. Methods of low-field NMR to determine flow properties were adapted to the desired application. Further, magnetic resonance imaging measurements were made to determine the flow properties of model substances and anode slurries, thus providing verification. The sensor measurements show the ability to measure the flow behavior of, amongst other fluids, anode slurries in a form suitable for inline quality control in a battery production plant.

To reduce unwanted fat bloom in the manufacturing and storage of chocolates, detailed knowledge of the chemical composition and molecular mobility of the oils and fats contained is required. Although the formation of fat bloom on chocolate products has been studied for many decades with regard to its prevention and reduction, questions on the molecular level still remain to be answered. Chocolate products with nut-based fillings are especially prone to undesirable fat bloom. The chemical composition of fat bloom is thought to be dominated by the triacylglycerides of the chocolate matrix, which migrate to the chocolate's surface and recrystallize there. Migration of oils from the fillings into the chocolate as driving force for fat bloom formation is an additional factor in the discussion. In this work, the migration was studied and confirmed by MRI, while the chemical composition of the fat bloom was measured by NMR spectroscopy and HPLC-MS, revealing the most important triacylglycerides in the fat bloom. The combination of HPLC-MS with NMR spectroscopy at 800 MHz allows for detailed chemical structure determination. A rapid routine was developed combining the two modalities, which was then applied to investigate the aging, the impact of chocolate composition, and the influence of hazelnut fillings processing parameters, such as the degree of roasting and grinding of the nuts or the mixing time, on fat bloom formation.

Inline analytics in industrial processes reduce operating costs and production rejection. Dedicated sensors enable inline process monitoring and control tailored to the application of interest. Nuclear Magnetic Resonance is a well-known analytical technique but needs adapting for low-cost, reliable and robust process monitoring. A V-shaped low-field NMR sensor was developed for inline process monitoring and allows non-destructive and non-invasive measurements of materials, for example in a pipe. In this paper, the industrial application is specifically devoted to the quality control of anode slurries in battery production. The characterization of anode slurries was performed with the sensor to determine chemical composition and detect gas inclusions. Additionally, flow properties play an important role in continuous production processes. Therefore, the in- and outflow effects were investigated with the V-shaped NMR sensor as a basis for the future determination of slurry flow fields.

NMR methods were applied for lubricant analysis. Different factors influence the real aging of lubricants on diverse length scales and are captured by NMR. Chemical conversion of additives is addressed by NMR spectroscopy. High-field NMR experiments allow the identification and quantification of chemical components and are transferred to benchtop devices. Molecular dynamics and contaminations like fuel or abrasion are addressed via NMR relaxation and diffusion. Quality parameters were extracted via suitable data analysis of NMR raw data, which allow the detection of aging and indicate changes in the oil composition. At the same time, the methodology is optimized to the conditions in quality control. The feasibility is shown the example of a series of lubricants from applications in regenerative energy production, namely, wind turbine oils and biogas motor oils., (© 2023 John Wiley & Sons Ltd.)

Process monitoring and control require dedicated and reliable measures which reflect the status of the process under investigation. Although nuclear magnetic resonance is known to be a versatile analytical technique, it is only seldomly found in process monitoring. Single-sided nuclear magnetic resonance is one well known approach for being applied in process monitoring. The dedicated V-sensor is a recent approach that allows the inline investigation of materials in a pipe non-destructively and non-invasively. An open geometry of the radiofrequency unit is realized using a tailored coil, enabling the sensor to be applied for manifold mobile applications in in-line process monitoring. Stationary liquids were measured, and their properties were integrally quantified as the basis for successful process monitoring. The sensor, in its inline version, is presented along with its characteristics. An exemplary field of application is battery production in terms of anode slurries; thus, the first results on graphite slurries will demonstrate the added value of the sensor in process monitoring.

The crystallization of melt emulsions is of great interest to the food, cosmetic, and pharmaceutical industries. Surfactants are used in emulsions and suspensions to stabilize the dispersed phase; thus, questions arise about the liquid-liquid and solid-liquid interfaces of the droplets or particles and the distribution of the surfactant in the different phases (continuous and dispersed phase, interface). Nuclear magnetic resonance relaxation and diffusion measurements revealed that the internal and rotational mobility of surfactant molecules at the liquid-liquid interface decreases with increasing droplet sizes. Additionally, solid-liquid interfaces have fewer surfactants than liquid-liquid interfaces as a result of the desorption of the surfactant molecules during the crystallization of the droplets. Relaxation rates of surfactant molecules in aqueous solution as single molecules, micelles, and at the liquid-liquid and solid-liquid interface are analyzed for the first time., (© 2022 The Authors. Magnetic Resonance in Chemistry published by John Wiley & Sons Ltd.)

A time-dependent understanding of swelling characteristics and external stimuli behavior is crucial for the development and understanding of functional hydrogels. Magnetic resonance imaging (MRI) offers the opportunity to study three-dimensional (3D) soft materials nondestructively. This technique is already widely used as an image-based medical diagnostic tool and is applied here to evaluate complex structures of a hydrogel-a double network of chemically crosslinked casein enhanced with alginate-fabricated by 3D printing. When hydrogel disks immersed in four different liquid systems were analyzed, the material exhibited distinct system-dependent behavior characterized by rheological and mechanical measurements. Further material functionalization was achieved by macroscopic structuring of the hydrogel as an auxetic material based on a re-entrant honeycomb structure. MRI offers the advantage of monitoring overall changes in the area of the analyzed specimen and internal structural changes simultaneously. To assess the behavior of this complex structure, a series of short MRI measurements, each lasting 1.7 min, captured liquid diffusion and thus structural swelling behavior. A clear dependence of external and internal structural changes as a function of liquid properties causing these changes was observed. In conclusion, this approach might pave the way for prospective applications to monitor liquid diffusion into (e.g., vascularization) and swelling behavior of functional hydrogels.

Selectivity and image contrast are always challenging in magnetic resonance imaging (MRI), which are - inter alia - addressed by contrast agents. These compounds still need to be improved, and their relaxation properties, i. e., their paramagnetic relaxation enhancement (PRE), needs to be understood. The main goal is to improve specificity and relaxivities, especially at the high magnetic fields currently exploited not only in material science but also in the medical environment. Longitudinal and transverse relaxivities, r 1 and r 2 , which correspond to the longitudinal and transverse relaxation rates R 1 and R 2, normalized to the concentration of the paramagnetic moieties, need to be considered because both contribute to the image contrast. 1 H-relaxivities r 1 and r 2 of high-spin heterometallic clusters were studied containing lanthanide and transition-metal ions within a polyoxometalate matrix. A wide range of magnetic fields from 0.5 T/20 MHz to 33 T/1.4 GHz was applied. The questions addressed here concern the rotational and diffusion correlation times which determine the relaxivities and are affected by the solvent's viscosity. Moreover, the variation of the lanthanide and transition-metal ions of the clusters provided insights into the sensitivity of PRE with respect to the electron spin properties of the paramagnetic centers as well as cooperative effects between lanthanides and transition metal ions., (© 2022 Wiley-VCH GmbH.)

Increasing the efficiency of disperse phase crystallization is of great interest for melt emulsion production as the fraction of solidified droplets determines product quality and stability. Nucleation events must appear within every single one of the μm-sized droplets for solidification. Therefore, primary crystallization requires high subcooling and is, thus, time and energy consuming. Contact-mediated nucleation is a mechanism for intensifying the crystallization process. It is defined as the successful nucleation of a subcooled liquid droplet induced by contact with an already crystallized droplet. We investigated contact-mediated nucleation under shear flow conditions up to shear rates of 457 s -1 for a quantitative assessment of this mechanism. Rheo-nuclear magnetic resonance was successfully used for the time-resolved determination of the solids fraction of the dispersed phase of melt emulsions upon contact-mediated nucleation events. The measurements were carried out in a dedicated Taylor-Couette cell. The efficiency of contact-mediated nucleation λ sec decreased with increasing shear rate, whereas the effective second order kinetic constant k coll , eff increased approximately linearly at small shear rates and showed a linear decrease for shear rates higher than about 200 s -1 . These findings are in accordance with coalescence theory. Thus, the nucleation rate is optimal at specific flow conditions. There are limitations for successful inoculation at a low shear rate because of rare contact events and at a high shear rate due to too short contact time., (© 2021 The Authors. Magnetic Resonance in Chemistry published by John Wiley & Sons Ltd.)

Charge transport, diffusion properties, and glassy dynamics of blends of imidazolium-based ionic liquid (IL) and the corresponding polymer (polyIL) were examined by Pulsed-Field-Gradient Nuclear Magnetic Resonance (PFG-NMR) and rheology coupled with broadband dielectric spectroscopy (rheo-BDS). We found that the mechanical storage modulus (G') increases with an increasing amount of polyIL and G' is a factor of 10,000 higher for the polyIL compared to the monomer (GIL'= 7.5 Pa at 100 rad s -1 and 298 K). Furthermore, the ionic conductivity (σ0) of the IL is a factor 1000 higher than its value for the polymerized monomer with 3.4×10-4 S cm -1 at 298 K. Additionally, we found the Haven Ratio (HR) obtained through PFG-NMR and BDS measurements to be constant around a value of 1.4 for the IL and blends with 30 wt% and 70 wt% polyIL. These results show that blending of the components does not have a strong impact on the charge transport compared to the charge transport in the pure IL at room temperature, but blending results in substantial modifications of the mechanical properties. Furthermore, it is highlighted that the increase in σ0 might be attributed to the addition of a more mobile phase, which also possibly reduces ion-ion correlations in the polyIL.

As virtual reality (VR) has drastically evolved over the past few years, the field of applications of VR flourished way beyond the gaming industry. While commercial VR solutions might be available, there is a need to develop a workflow for specific applications. Bioprinting represents such an example. Here, complex 3D data is generated and needs to be visualized in the context of quality control. We demonstrate that the transfer to a commercially available VR software is possible by introducing an optimized workflow. In the present work, we developed a workflow for the visualization of the critical quality attribute (cQA) cell distribution in bioprinted (extrusion-based) samples in VR. The cQA cell distribution is directly influenced by the pre-processing step mixing of cell material in the bioink. Magnetic Resonance Imaging (MRI) was used as an analytical tool to generate spatially resolved 2.5 and 3D data of the bioprinted objects. A sample with poor quality in respect of the cQA cell distribution was identified as its inhomogeneous cell distribution could be displayed spatially resolved in VR. The described workflow facilitates the usage of VR as a tool for quality inspection in the field of bioprinting and represents a powerful tool for visualization of complex 3D MRI data., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2022 Gretzinger, Schmieg, Guthausen and Hubbuch.)

Bioprinting is gaining importance for the manufacturing of tailor-made hydrogel scaffolds in tissue engineering, pharmaceutical research and cell therapy. However, structure fidelity and geometric deviations of printed objects heavily influence mass transport and process reproducibility. Fast, three-dimensional and nondestructive quality control methods will be decisive for the approval in larger studies or industry. Magnetic resonance imaging (MRI) meets these requirements for characterizing heterogeneous soft materials with different properties. Complementary to the idea of decentralized 3D printing, magnetic resonance tomography is common in medicine, and image data processing tools can be transferred system-independently. In this study, a MRI measurement and image analysis protocol was evaluated to jointly assess the reproducibility of three different hydrogels and a reference material. Critical parameters for object quality, namely porosity, hole areas and deviations along the height of the scaffolds are discussed. Geometric deviations could be correlated to specific process parameters, anomalies of the ink or changes of ambient conditions. This strategy allows the systematic investigation of complex 3D objects as well as an implementation as a process control tool. Combined with the monitoring of metadata this approach might pave the way for future industrial applications of 3D printing in the field of biopharmaceutics., (© 2022 The Authors. Biotechnology Journal published by Wiley-VCH GmbH.)