Search

The use and integration of novel materials are increasingly becoming vital tools in the field of preventive conservation of cultural heritage. Chemical factors, such as volatile organic compounds (VOCs), but also environmental factors such as high relative humidity, can lead to degradation, oxidation, yellowing, and fading of the works of art. To prevent these phenomena, highly porous materials have been developed for the absorption of VOCs and for controlling the relative humidity. In this work, graphene and transition-metal dichalcogenides (TMDs) were combined to create three-dimensional aerogels that absorb certain harmful substances. More specifically, the addition of the TMDs molybdenum disulfide and tungsten disulfide in such macrostructures led to the selective absorption of ammonia. Moreover, the addition of the ionic liquid 1-hexadecyl-3-methylimidazolium chloride promoted higher rates of VOCs absorption and anti-fungal activity against the fungus Aspergillus niger. These two-dimensional materials outperform benchmark porous absorbers in the absorption of all the examined VOCs, such as ammonia, formic acid, acetic acid, formaldehyde, and acetaldehyde. Consequently, they can be used by museums, galleries, or even storage places for the perpetual protection of works of art.

This work reports on advances in capacitive humidity and strain sensor technologies through the development of state-of-the-art 3D-printed Interdigitated Electrodes (IDEs) coated with a unique GO/ PVA coating. These IDEs are constructed using a novel composite filament of MWCNTs and polylactic acid (PLA) that offer superior flexural strength and electrical properties compared to conventional polymer matrices.We show that the GO/ PVA coating appears to be sensitive over the full range of relative humidity (RH) from 0% to 100%, with a remarkable capacitance change of 300 pF/%RH. Fast response and recovery times of 60 and 42 s, respectively, have been measured outperforming existing works that utilize metal electrodes. Regarding temperature dependence, the coatings endure conditions ranging from ambient to −25 °C, even in the presence of ice. Furthermore, at 50% RH, the sensors are shown to achieve a maximum sensitivity of 34.2 within a strain range of up to 2%.In conclusion, this work represents a significant advancement in cutting-edge sensor technologies, offering unprecedented capabilities for humidity and strain sensing performance for a wide range of applications.

Abstract Aerogels have attracted significant attention recently due to their ultra-light weight porous structure, mechanical robustness, high electrical conductivity, facile scalability and their use as gas and oil absorbers. Herein, we examine the multi-functional properties of hybrid aerogels consisting of reduced graphene oxide (rGO) integrated with hexagonal boron nitride (hBN) platelets. Using a freeze-drying approach, hybrid aerogels are fabricated by simple mixing with various volume fractions of hBN and rGO up to 0.5/0.5 ratio. The fabrication method is simple, cost effective, scalable and can be extended to other 2D materials combinations. The hybrid rGO/hBN aerogels (HAs) are mechanically robust and highly compressible with mechanical properties similar to those of the pure rGO aerogel. We show that the presence of hBN in the HAs enhances the gas absorption capacities of formaldehyde and water vapour up to ~ 7 and > 8 times, respectively, as compared to pure rGO aerogel. Moreover, the samples show good recoverability, making them highly efficient materials for gas absorption applications and for the protection of artefacts such as paintings in storage facilities. Finally, even in the presence of large quantity of insulating hBN, the HAs are electrically conductive, extending the potential application spectrum of the proposed hybrids to the field of electro-thermal actuators. The work proposed here paves the way for the design and production of novel 2D materials combinations with tailored multi-functionalities suited for a large variety of modern applications.

The very serious problem of temperature and humidity regulation, especially for small and medium-sized museums, galleries, and private collections, can be mitigated by the introduction of novel materials that are easily applicable and of low cost. Within this study, archive boxes with innovative technology are proposed as “smart” boxes that can be used for storage and transportation, in combination with a nanocomposite material consisting of polyvinyl alcohol (PVA) and graphene oxide (GO). The synthesis and characterization of the PVA/GO structure with SEM, Raman, AFM, XRD, Optical Microscopy, and profilometry are fully discussed. It is shown that the composite material can be integrated into the archive box either as a stand-alone film or attached onto fitting carriers, for example, those made of corrugated board. By applying the PVA/GO membrane this way, even with strong daily temperature fluctuations of ΔT = ±24.1 °C, strong external humidity fluctuations can be reduced by −87% inside the box. Furthermore, these humidity regulators were examined as Volatile Organic Compounds (VOCs) adsorbers since gas pollutants like formic acid, formaldehyde, acetic acid, and acetaldehyde are known to exist in museums and induce damages in the displayed or stored items. High rates of VOC adsorption have been measured, with the highest ones corresponding to formic acid (521% weight increase) and formaldehyde (223% weight increase).

Superlubricity in macro-scale graphitic samples is hampered by commensurate stacking domains that prevent facile sliding between adjacent graphene layers. Here, the authors show the presence of macroscale structural superlubricity between two randomly stacked graphene layers produced by both mechanical exfoliation and CVD upon the imposition of a tensile stress.

Ultra-sensitive and responsive humidity sensors were fabricated by deposition of graphene oxide (GO) on laser-induced graphene (LIG) electrodes fabricated by a low-cost visible laser scribing tool. The effects of GO layer thickness and electrode geometry were investigated. Sensors comprising 0.33 mg/mL GO drop-deposited on spiral LIG electrodes exhibited high sensitivity up to 1800 pF/% RH at 22 °C, which is higher than previously reported LIG/GO sensors. The high performance was ascribed to the high density of the hydroxyl groups of GO, promoted by post-synthesis sonication treatment, resulting in high water physisorption rates. As a result, the sensors also displayed good stability and short response/recovery times across a wide tested range of 0–97% RH. The fabricated sensors were benchmarked against commercial humidity sensors and displayed comparable performance and stability. Finally, the sensors were integrated with a near-field communication tag to function as a wireless, battery-less humidity sensor platform for easy read-out of environmental humidity values using smartphones.

The mechanical integrity of composite materials depends primarily on the interface strength and the defect density of the reinforcement which is the provider of enhanced strength and stiffness. In the case of graphene/polymer nanocomposites which are characterized by an extremely large interface region, any defects in the inclusion (such as folds, cracks, holes, etc) will have a detrimental effect to the internal strain distribution and the resulting mechanical performance. This conventional wisdom, however, can be challenged if the defect size is reduced beyond the critical size for crack formation to the level of atomic vacancies. In that case, there should be no practical effect on crack propagation and depending on the nature of the vacancies the interface strength may in fact increase. In this work we employed argon ion (Ar+) bombardment and subsequent exposure to hydrogen (H2) to induce (as revealed by x-ray and ultraviolet photoelectron spectroscopy and Raman spectroscopy) passivated atomic single vacancies to CVD graphene. The modified graphene was subsequently transferred to PMMA bars and the morphology, wettability and the interface adhesion of the CVD graphene/PMMA system were investigated with atomic force microscopy technique and Raman analysis. The results obtained showed clearly an overall improved mechanical behavior of graphene/polymer interface, since an increase as well as a more uniform shift distribution with strain is observed. This paves the way for interface engineering in graphene/polymer systems which, in pristine condition, suffer from premature graphene slippage and subsequent failure. [ABSTRACT FROM AUTHOR]