Search

The ileocolonic-targeted delivery of vitamins can establish beneficial alterations in gut microbial composition. Here, we describe the development of capsules containing riboflavin, nicotinic acid, and ascorbic acid covered with a pH-sensitive coating (ColoVit) to establish site-specific release in the ileocolon. Ingredient properties (particle size distribution, morphology) relevant for formulation and product quality were determined. Capsule content and the in vitro release behaviour were determined using a HPLC-method. Uncoated and coated validation batches were produced. Release characteristics were evaluated using a gastro-intestinal simulation system. All capsules met the required specifications. The contents of the ingredients were in the 90.0–120.0% range, and uniformity requirements were met. In the dissolution test a lag-time in drug release of 277–283 min was found, which meets requirements for ileocolonic release. The release itself is immediate as shown by dissolution of the vitamins of more than 75% in 1 h. The production process of the ColoVit formulation was validated and reproducible, it was shown that the vitamin blend was stable during the production process and in the finished coated product. The ColoVit is intended as an innovative treatment approach for beneficial microbiome modulation and optimization of gut health. [ABSTRACT FROM AUTHOR]

Swallowing problems and the required dose adaptations needed to obtain optimal pharmacotherapy may be a hurdle in the use of tablets in daily clinical practice. Tablet splitting, crushing, or grinding is often applied to personalise medication, especially for the elderly and children. In this study, the performance of different types of (commercially available) devices was studied. Included were splitters, screwcap crushers, manual grinders, and electric grinders. Unscored tablets without active ingredient were prepared, with a diameter of 9 and 13 mm and a hardness of 100–220 N. Tablets were split into two parts and the difference in weight was measured. The time needed to pulverise the tablets (crush time) was recorded. The residue remaining in the device (loss) was measured. The powder was sieved to obtain a particle fraction >600 µm and <600 µm. The median particle size and particle size distribution of the later fraction were determined using laser diffraction analysis. Splitting tablets into two equal parts appeared to be difficult with the devices tested. Most screwcap grinders yielded a coarse powder containing larger chunks. Manual and especially electric grinders produced a finer powder, making it suitable for administration via an enteral feeding tube as well as for use in individualised preparations such as capsules. In conclusion, for domestic and incidental use, a screwcap crusher may provide sufficient size reduction, while for the more demanding regular use in hospitals and nursing residences, a manual or electric grinder is preferred. [ABSTRACT FROM AUTHOR]

The tabletting properties of a number of different amorphous inulin types were investigated. The types varied with respect to chain length, particle size and amount of included air in the particles. Powder flow properties and densities of the different types were investigated. Just as expected, it was found that the flow properties improved with increased particle size of the material. Compactibility was investigated by compression of tablets on a compaction simulator, simulating the compression on high-speed tabletting machines. The bonding capacity of all inulins was high. However, the lubricant sensitivity strongly varied among the different types of inulin. Generally, amorphous materials such as starches are highly lubricant sensitive, because they show ductile behaviour upon compaction. On the other hand, crystalline materials such as dicalcium phosphate dihydrate have a low lubricant sensitivity, because they fragment during compaction. A high lubricant sensitivity was indeed found for amorphous inulins with a low amount of entrapped air. In contrast, the lubricant sensitivity of the amorphous inulin was low when particles containing large amounts of air were compressed. Obviously entrapped air induces fragmentation of the powder particles by which the lubricant film, covering the particles, was destroyed. Tablets prepared from inulin did not disintegrate but they dissolved when incubated in water. The disintegration/dissolution time increased with decreasing chain length of the inulin. The addition of a disintegrant reduced the disintegration time. The somewhat slower dissolution of the longer chain inulin can be an advantage for chewable tablets or lozenges. It was concluded that inulin with large amounts of entrapped air is a good filler-binder and an attractive alternative to commonly used filler-binders. [Copyright &y& Elsevier]

Lactoferrin (Lf) is a potential drug candidate for the treatment of oropharyngeal Candida infections. However, for an effective therapeutic treatment an appropriate dosage form is required. Therefore a mucoadhesive tablet for buccal application was developed. Tablets of sufficient strength could be produced on high speed tabletting machines, but they could only be obtained when the protein contained at least 7% moisture. The tablet contained sodium alginate both for its release-controlling properties as well as for its mucoadhesive properties. Furthermore, phosphate buffer was added to keep the pH of the saliva in the mouth within the range of 6.5 to 7.5. In this pH range, Lf has shown to have its highest activity against Candida growth inhibition. The tablet formulation containing Lf had the same antifungal properties as compared with Lf alone, because in most cases identical inhibitory concentrations were observed against several clinical isolates of Candida albicans and Candida glabrata. In human volunteers the tablets, containing 250 mg Lf and placed in each pouch, were able to keep the Lf concentration in the saliva at effective levels for at least 2 hr, while the pH of the saliva remained within the desired range. We concluded that the developed mucoadhesive tablet can improve the therapeutic efficacy of Lf and that it is suitable for further clinical research. [ABSTRACT FROM AUTHOR]

An abstract of the article "Marked Endotheliotropism of Highly Pathogenic Avian Influenza Virus H5N1 following Intestinal Inoculation in Cats," by Leslie A. Reperant and colleagues is presented.

The aim of this study was to develop a dry powder formulation that stabilises the chemically labile lipophilic Delta(9)-tetrahydrocannabinol (THC), that rapidly dissolves in water in order to increase the bioavailability and that opens new routes of administration. It was investigated whether these aims can be achieved with solid dispersions consisting of a matrix of inulin, an oligo-fructose, in which THC is incorporated. These solid dispersions were prepared by lyophilisation of a solution of THC and inulin in a mixture of water and tertiary butyl alcohol (TBA). Both 4 and 8 wt.% of THC could be incorporated in a glassy matrix of inulin. In the solid dispersions only 0.4-0.5 wt.% of residual TBA was present after storage at 20 degrees C/45% relative humidity (RH) for 7 days. Unprotected THC was completely degraded after 40 days of exposure to 20 degrees C and 45% RH. However, solid dispersions exposed to the same conditions still contained about 80% non-degraded THC after 300 days. Dissolution experiments with tablets compressed from inulin glass dispersion material showed that THC and inulin dissolved at the same rate. Tablets weighing 125 mg and containing 2mg THC were prepared from a mixture of THC containing solid dispersion, polyvinylpolypyrrolidone (PVPP) and mannitol. Dissolution tests revealed that from these tablets 80% of the THC was dissolved within 3 min, which makes them promising for sublingual administration. It was concluded that THC can be strongly stabilized by incorporating it in a matrix of inulin. The aqueous dissolution rate was high which may improve bioavailability.

Moisture influences the consolidation behaviour of amylodextrin powders and the porosity and mechanical strength of compacts thereof. The aim of this study is to relate moisture content and compact properties to drug release characteristics of amylodextrin tablets. Therefore, amylodextrin tablets containing theophylline monohydrate were prepared and their release characteristics were studied as a function of moisture content and initial porosity. Drug release from amylodextrin tablets occurs through a leaching mechanism in which cracks are progressively formed in the hydrated part of the matrix leading to almost constant release rates. Small variations in moisture content resulted in large changes of the release rate. A unique relationship between porosity and release rate, which was independent on moisture content and compaction pressure, was observed. Above a critical porosity of 0.075 crack formation was followed by disintegration and fast release. Below this critical porosity, tablets stayed intact despite of the formation of cracks, and sustained release was observed. It is concluded that control over moisture content is essential for the production of amylodextrin tablets with reproducible release characteristics. Using amylodextrin containing 10-17%, moisture, tablets with a constant release behaviour can be obtained if sufficient compaction pressure ( > 300 MPa) is applied. Lubrication of amylodextrin powders reduces the effect of porosity significantly and improves the robustness of amylodextrin tablets as a release controlling excipient in tablets largely.