Search

Aims: Percutaneous pulmonary valve implantation (PPVI) has proven good hemodynamic results. As infective endocarditis (IE) remains a potential complication with limited available clinical data, we reviewed our patient records to improve future strategies of IE prevention, diagnosis and treatment. Methods: Medical records of all patients diagnosed with Melody® valve IE according to the modified Duke criteria were retrospectively analyzed in three Belgian tertiary centers. Results: 23 IE episodes in 22 out of 240 patients were identified (incidence 2.4% / patient year) with a clear male predominance (86%). Median age at IE was 17.9 years (range 8.2–45.9 years) and median time from PPVI to IE was 2.4 years (range 0.7–8 years). Streptococcal species caused 10 infections (43%), followed by Staphylococcus aureus (n = 5, 22%). In 13/23 IE episodes a possible entry-point was identified (57%). IE was classified as definite in 15 (65%) and as possible in 8 (35%) cases due to limitations of imaging. Echocardiography visualized vegetations in only 10 patients. PET-CT showed positive FDG signals in 5/7 patients (71%) and intracardiac echocardiography a vegetation in 1/1 patient (100%). Eleven cases (48%) had a hemodynamically relevant pulmonary stenosis at IE presentation. Nine early and 6 late percutaneous or surgical re-interventions were performed. No IE related deaths occurred. Conclusions: IE after Melody® valve PPVI is associated with a relevant need of re-interventions. Communication to patients and physicians about risk factors is essential in prevention. The modified Duke criteria underperformed in diagnosing definite IE, but inclusion of new imaging modalities might improve diagnostic performance. • IE after PPVI is associated with a high requirement for re-intervention. • Sensitivity of the Duke criteria can be improved by additional imaging methods. • An otherwise not explainable increase in RVOT gradient seems a valuable criterion. • Patients' knowledge of IE is essential to prevent diagnostic delay and morbidity. • Improving patients' and physicians' knowledge on general and oral health care seems essential in IE prevention. [ABSTRACT FROM AUTHOR]

The sole effective treatment for most patients with heart valve disease is valve replacement by implantation of mechanical or biological prostheses. However, mechanical valves represent high risk of thromboembolism, and biological prostheses are prone to early degeneration. In this work, we aim to determine the potential of novel environmentally-friendly non-isocyanate polyurethanes (NIPUs) for manufacturing synthetic prosthetic heart valves. Polyhydroxyurethane (PHU) NIPUs are synthesized via an isocyanate-free route, tested in vitro , and used to produce aortic valves. PHU elastomers reinforced with a polyester mesh show mechanical properties similar to native valve leaflets. These NIPUs do not cause hemolysis. Interestingly, both platelet adhesion and contact activation-induced coagulation are strongly reduced on NIPU surfaces, indicating low thrombogenicity. Fibroblasts and endothelial cells maintain normal growth and shape after indirect contact with NIPUs. Fluid-structure interaction (FSI) allows modeling of the ideal valve design, with minimal shear stress on the leaflets. Injection-molded valves are tested in a pulse duplicator and show ISO-compliant hydrodynamic performance, comparable to clinically-used bioprostheses. Poly(tetrahydrofuran) (PTHF)-NIPU patches do not show any evidence of calcification over a period of 8 weeks. NIPUs are promising sustainable biomaterials for the manufacturing of improved prosthetic valves with low thrombogenicity.

Background: Prosthetic heart valves are the only treatment for most patients with severe valvular heart disease. Mechanical valves, made of metallic components, are the most long-lasting type of replacement valves. However, they are prone to thrombosis and require permanent anticoagulation and monitoring, which leads to higher risk of bleeding and impacts the patient's quality of life., Objectives: To develop a bioactive coating for mechanical valves with the aim to prevent thrombosis and improve patient outcomes., Methods: We used a catechol-based approach to produce a drug-releasing multilayer coating adherent to mechanical valves. The hemodynamic performance of coated Open Pivot valves was verified in a heart model tester, and coating durability in the long term was assessed in a durability tester producing accelerated cardiac cycles. Coating antithrombotic activity was evaluated in vitro with human plasma or whole blood under static and flow conditions and in vivo after surgical valve implantation in a pig's thoracic aorta., Results: We developed an antithrombotic coating consisting of ticagrelor- and minocycline-releasing cross-linked nanogels covalently linked to polyethylene glycol. We demonstrated the hydrodynamic performance, durability, and hemocompatibility of coated valves. The coating did not increase the contact phase activation of coagulation, and it prevented plasma protein adsorption, platelet adhesion, and thrombus formation. Implantation of coated valves in nonanticoagulated pigs for 1 month efficiently reduced valve thrombosis compared with noncoated valves., Conclusion: Our coating efficiently inhibited mechanical valve thrombosis, which might solve the issues of anticoagulant use in patients and the number of revision surgeries due to valve thrombosis despite anticoagulation., Competing Interests: Declaration of competing interests C.O., P.L., C.D., and C.J. are inventors on a patent owned by the University of Liège related to medical devices coated with the presented technology (WO2018122318A1)., (Copyright © 2023 The Author(s). Published by Elsevier Inc. All rights reserved.)

Objective: Although recent advances in pulmonary valve replacement have enabled excellent hemodynamics, infective endocarditis remains a serious complication, particularly for implanted bovine jugular vein (BJV) conduits., Methods: We investigated contributions by platelets and plasma fibrinogen to endocarditis initiation on various grafts used for valve replacement. Thus, adherence of Staphylococcus aureus and platelets to 5 graft tissues was studied quantitatively in perfusion chambers, assisted by microscopic analysis. We also evaluated standard antiplatelet therapy to prevent onset of S aureus endocarditis., Results: Of all tissues, bovine pericardium (BP) showed the greatest fibrinogen binding. Perfusion of all plasma-precoated tissues identified BP and BJV wall with the greatest affinity for S aureus. Perfusions of anticoagulated human blood over all tissues also triggered more platelet adhesion to BP and BJV wall as single platelets. Several controls confirmed that both S aureus and platelets were recruited on immobilized fibrinogen. In addition, perfusions (and controls) over plasma-coated tissues with whole blood, spiked with S aureus, revealed that bacteria exclusively bound to adhered platelets. Both the platelet adhesion and platelet-mediated S aureus recruitment required platelet α IIb β 3 and coated or soluble fibrinogen, respectively, interactions abrogated by the α IIb β 3 -antagonist eptifibatide. Also, standard antiplatelet therapy (aspirin/ticagrelor) reduced the adherence of S aureus in blood to BJV 3-fold., Conclusions: Binding of plasma fibrinogen to especially BJV grafts enables adhesion of single platelets via α IIb β 3 . S aureus then attaches from blood to (activated) bound platelet α IIb β 3 via plasma fibrinogen. Dual antiplatelet therapy appears a realistic approach to prevent endocarditis and its associated mortality., (Copyright © 2019 The American Association for Thoracic Surgery. Published by Elsevier Inc. All rights reserved.)

Pulmonary valve replacement is performed with excellent resultant hemodynamics in patients that have underlying congenital or acquired heart valve defects. Despite recent advancements in right ventricular outflow tract reconstruction, an increased risk of developing infective endocarditis remains, which has a more common occurrence for conduits of bovine jugular vein (BJV) origin compared with cryopreserved homografts. The reason for this is unclear although it is hypothesized to be associated with an aberrant phenotypic state of cells that reendothelialize the graft tissue postimplantation. The aim of this study was to develop an in vitro model that enables the analysis of endothelial cell (EC) attachment to cardiac graft tissues under flow. In the experiments, EC attachment was optimized on bovine pericardium (BP) patch using human umbilical vein ECs. Different biological coatings, namely gelatin, fibronectin, plasma, or a combination of fibronectin and plasma were tested. After cell adaptation, graft tissues were exposed to laminar flow in a parallel-plate flow chamber. Cell retention to the tissue was analyzed after nuclear staining with YO-PRO-1 and a membranous localization of VE-cadherin. Experiments showed that combined coating with fibronectin and blood plasma together with a two-phased shear pattern resulted in a relevant cell monolayer on BP patch and cryopreserved homograft. For BJV tissue, no adherent cells under both static and shear conditions were initially observed. In conclusion, having established the new flow chamber system we could obtain EC layers on the surface of BP patch and cryopreserved pulmonary homograft tissues. The presented in vitro system can serve as a competent model to study cell phenotypes on cardiac grafts in the close-to-physiologic environment. Moreover, this approach allows broad applications and enables further development by testing more complex conditions.

Objective: Infective endocarditis remains a severe complication associated with a high morbidity and mortality in patients after heart valve replacement. Exploration of the pathogenesis is of high demand and we, therefore, present a competent model that allows studying bacterial adherence and the role of plasma fibrinogen in this process using a new in-house designed low-volume flow chamber. Three cardiac graft tissues used for pulmonary valve replacement have been tested under shear conditions to investigate the impact of surface composition on the adhesion events., Methods: Tissue pieces of cryopreserved homograft (non-decellularised), decellularised homograft and bovine pericardium patch were investigated for fibrinogen binding. Adherence of Staphylococcus aureus to these graft tissues was studied quantitatively under flow conditions in our newly fabricated chamber based on a parallel plates' modality. The method of counting colony-forming units was reliable and reproducible to assess the propensity of different graft materials for bacterial attachment under shear., Results: Bacterial perfusions over all plasma-precoated tissues identified cryopreserved homograft with the lowest affinity for S. aureus compared to decellularised homograft presenting a significantly higher bacterial adhesion (p < 0.05), which was linked to a more avid fibrinogen binding (p < 0.01). Bovine pericardial patch, as a reference tissue in this study, was confirmed to be the most susceptible tissue graft for the bacterial adhesion, which was in line with our previous work., Conclusion: The two studied homograft tissues showed different levels of bacterial attachment, which might be postulated by the involvement of fibrinogen in the adhesion mechanism(s) shown previously for bovine tissues.

Thrombogenicity and bacterial infectiveness are the most common complications for foreign blood contacting surfaces associated with functional failure of small-diameter vascular grafts (SDVGs). In this work, novel bactericidal and nonthrombogenic SDVGs were manufactured via 3D-printing technology, thus producing a controlled nitric oxide (NO) release coating. S -Nitroso- N -acetyl-D-penicillamine (SNAP) was synthesized as an NO-donor, and three biomedical grade composite matrixes of poly(ethylene glycol) (PEG)-SNAP, polycaprolactone (PCL)-SNAP, and PEG-PCL-SNAP were validated for water uptake and NO-release kinetics. To optimize and extend the NO releasing profile, a PCL top-coat (tc) was deposited over the NO-releasing layer. The PEG-PCL-SNAP-tc was selected for biological tests as its NO-release profile was prolonged and well-controlled. Coating the 3D-printed SDVG with PEG-PCL-SNAP-tc resulted in quantitative antibacterial features against both Gram-positive and Gram-negative bacteria and in NO-mediated inhibition of platelet activation and aggregation. Antibacterial and antithrombogenic properties in plasma are expected to be as effective as in PBS, since NO release in plasma was not significantly different from that in PBS. Overall, application of the inexpensive, rapid, and reproducible 3D-printing technology as a custom-based production method, in combination with a well-controlled NO release system, is promising for the production of innovative bactericidal and hemocompatible SDVGs.

Background: Infective endocarditis (IE) remains a diagnostic and therapeutic challenge associated with high morbidity and mortality. We evaluated the microbial profile and clinical manifestation of IE in children., Methods: A retrospective study examining pediatric IE cases treated between 2000 and 2017 at the Department of Pediatric Cardiology, KU Leuven, was conducted. Clinical presentation, treatment, complications, outcome of IE, underlying microorganisms and congenital heart defects were reviewed., Results: Fifty-three patients were diagnosed with IE. Overall, 19 patients (36%) required cardiac surgery. Seven patients (13%) died. Eighty-seven percent of patients had an underlying congenital cardiac defect. Eighteen (34%) children presented with prosthetic graft IE. A causative organism was found in 49 (92%) cases: viridans group streptococci were identified in 17 (32%), Staphylococcus aureus in 13 (25%) and coagulase-negative staphylococci in 11 (20%) children. Community-acquired (CA) IE increased significantly from 8 (33%) cases in 2000-2007 to 20 (74%) cases in 2008-2017 (P < 0.01). Even with viridans streptococci being significantly more prevalent in the CA group (P < 0.01), we did not observe an increase of streptococcal IE from 2008 to 2017. Seventeen (32%) patients presented with hospital-acquired IE during the first year of life with 14 (82%) children after surgery and a prevalence of coagulase-negative staphylococci (53%)., Conclusions: The incidence of pediatric IE was similar over the investigated time period with a shift toward CA IE. Streptococci and staphylococci accounted for the majority of cases in both periods. Awareness of IE and its prevention is crucial in patients after implantation of prosthetic grafts.

Various valved conduits and stent-mounted valves are used for right ventricular outflow tract (RVOT) valve replacement in patients with congenital heart disease. When using prosthetic materials however, these grafts are susceptible to bacterial infections and various host responses. Identification of bacterial and host factors that play a vital role in endovascular adherence of microorganisms is of importance to better understand the pathophysiology of the onset of infections such as infective endocarditis (IE) and to develop preventive strategies. Therefore, the development of competent models to investigate bacterial adhesion under physiological shear conditions is necessary. Here, we describe the use of a newly designed in vitro perfusion chamber based on parallel plates that allows the study of bacterial adherence to different components of graft tissues such as exposed extracellular matrix, endothelial cells and inert areas. This method combined with colony-forming unit (CFU) counting is adequate to evaluate the propensity of graft materials towards bacterial adhesion under flow. Further on, the flow chamber system might be used to investigate the role of blood components in bacterial adhesion under shear conditions. We demonstrated that the source of tissue, their surface morphology and bacterial species specificity are not the major determining factors in bacterial adherence to graft tissues by using our in-house designed in vitro perfusion model.

Adhesion of Staphylococcus aureus to endothelial cells (ECs) is paramount in infective endocarditis. Bacterial proteins such as clumping factor A (ClfA) and fibronectin binding protein A (FnbpA) mediate adhesion to EC surface molecules and (sub)endothelial matrix proteins including fibrinogen (Fg), fibrin, fibronectin (Fn) and von Willebrand factor (vWF). We studied the influence of shear flow and plasma on the binding of ClfA and FnbpA (including its sub-domains A, A 16+ , ABC, CD) to coverslip-coated vWF, Fg/fibrin, Fn or confluent ECs, making use of Lactococcus lactis , expressing these adhesins heterologously. Global adherence profiles were similar in static and flow conditions. In the absence of plasma, L. lactis-clfA binding to Fg increased with shear forces, whereas binding to fibrin did not. The degree of adhesion of L. lactis-fnbpA to EC-bound Fn and of L. lactis-clfA to EC-bound Fg, furthermore, was similar to that of L. lactis-clfA to coated vWF domain A1, in the presence of vWF-binding protein (vWbp). Yet, in plasma, L. lactis-clfA adherence to activated EC-vWF/vWbp dropped over 10 minutes by 80% due to vWF-hydrolysis by a disintegrin and metalloproteinase with thrombospondin type 1 motif, member 13 and that of L. lactis-fnbpA likewise by > 70% compared to the adhesion in absence of plasma. In contrast, plasma Fg supported high L. lactis-clfA binding to resting and activated ECs. Or, in plasma S. aureus adhesion to active endothelium occurs mainly via two complementary pathways: a rapid but short-lived vWF/vWbp pathway and a stable integrin-coupled Fg-pathway. Hence, the pharmacological inhibition of ClfA-Fg interactions may constitute a valuable additive treatment in infective endocarditis., Competing Interests: P.V. reports grants and personal fees from Boehringer-Ingelheim, Bayer, Daiichi Sankyo and Pfizer, outside the area of this work. All other authors have no conflict of interest and nothing to disclose with regard to commercial support., (Georg Thieme Verlag KG Stuttgart · New York.)

Background: Various conduits and stent-mounted valves are used as pulmonary valve graft tissues for right ventricular outflow tract reconstruction with good hemodynamic results. Valve replacement carries an increased risk of infective endocarditis (IE). Recent observations have increased awareness of the risk of IE after transcatheter implantation of a stent-mounted bovine jugular vein valve. This study focused on the susceptibility of graft tissue surfaces to bacterial adherence as a potential risk factor for subsequent IE., Methods: Adhesion of Staphylococcus aureus, Staphylococcus epidermidis, and Streptococcus sanguinis to bovine pericardium (BP) patch, bovine jugular vein (BJV), and cryopreserved homograft (CH) tissues was quantified under static and shear stress conditions. Microscopic analysis and histology were performed to evaluate bacterial adhesion to matrix components., Results: In general, similar bacteria numbers were recovered from CH and BJV tissue surfaces for all strains, especially in flow conditions. Static bacterial adhesion to the CH wall was lower for S sanguinis adhesion (P < .05 vs BP patch). Adhesion to the BJV wall, CH wall, and leaflet was decreased for S epidermidis in static conditions (P < .05 vs BP patch). Bacterial adhesion under shear stress indicated similar bacterial adhesion to all tissues, except for lower adhesion to the BJV wall after S sanguinis incubation. Microscopic analysis showed the importance of matrix component exposure for bacterial adherence to CH., Conclusions: Our data provide evidence that the surface composition of BJV and CH tissues themselves, bacterial surface proteins, and shear forces per se are not the prime determinants of bacterial adherence., (Copyright © 2017 The American Association for Thoracic Surgery. Published by Elsevier Inc. All rights reserved.)

Streptomyces species are bacteria that resemble filamentous fungi in their hyphal mode of growth and sporulation. In Streptomyces coelicolor, the conversion of multigenomic aerial hyphae into chains of unigenomic spores requires synchronized septation accompanied by segregation of tens of chromosomes into prespore compartments. The chromosome segregation is dependent on ParB protein, which assembles into an array of nucleoprotein complexes in the aerial hyphae. Here, we report that nucleoprotein ParB complexes are bound in vitro and in vivo by topoisomerase I, TopA, which is the only topoisomerase I homolog found in S. coelicolor. TopA cannot be eliminated, and its depletion inhibits growth and blocks sporulation. Surprisingly, sporulation in the TopA-depleted strain could be partially restored by deletion of parB. Furthermore, the formation of regularly spaced ParB complexes, which is a prerequisite for proper chromosome segregation and septation during the development of aerial hyphae, has been found to depend on TopA. We hypothesize that TopA is recruited to ParB complexes during sporulation, and its activity is required to resolve segregating chromosomes.

Prior to bacterial cell division, the ATP-dependent polymerization of the cytoskeletal protein, ParA, positions the newly replicated origin-proximal region of the chromosome by interacting with ParB complexes assembled on parS sites located close to the origin. During the formation of unigenomic spores from multi-genomic aerial hyphae compartments of Streptomyces coelicolor, ParA is developmentally triggered to form filaments along the hyphae; this promotes the accurate and synchronized segregation of tens of chromosomes into prespore compartments. Here, we show that in addition to being a segregation protein, ParA also interacts with the polarity protein, Scy, which is a component of the tip-organizing centre that controls tip growth. Scy recruits ParA to the hyphal tips and regulates ParA polymerization. These results are supported by the phenotype of a strain with a mutant form of ParA that uncouples ParA polymerization from Scy. We suggest that the ParA-Scy interaction coordinates the transition from hyphal elongation to sporulation.

Objective: The snake venom component rhodocetin-αβ (RCαβ) stimulates endothelial cell motility in an α2β1 integrin-independent manner. We aimed to elucidate its cellular and molecular mechanisms., Methods and Results: We identified neuropilin-1 (Nrp1) as a novel target of RCαβ by protein-chemical methods. RCαβ and vascular endothelial growth factor (VEGF)-A avidly bind to Nrp1. Instead of acting as VEGF receptor 2 coreceptor, Nrp1 associates upon RCαβ treatment with cMet. Furthermore, cell-based ELISAs and kinase inhibitor studies showed that RCαβ induces phosphorylation of tyrosines 1234/1235 [corrected] and thus activation of cMet. Consequently, paxillin is phosphorylated at Y31, which is redistributed from streak-like focal adhesions to spot-like focal contacts at the cell perimeter, along with α2β1 integrin, thereby regulating cell-matrix interactions. Cortactin is abundant in the cell perimeter, where it is involved in the branching of the cortical actin network of lamellipodia, whereas tensile force-bearing actin stress fibers radiating from focal adhesions disappear together with zyxin, a focal adhesion marker, on RCαβ treatment., Conclusions: Our data demonstrate that (1) Nrp1 is a novel target for venom components, such as RCαβ; (2) Nrp1 coupled to cMet regulates the type of cell-matrix interactions in a manner involving paxillin phosphorylation; and (3) altered cell-matrix interactions determine endothelial cell migration and cellular force management.

Bacterial chromosome segregation usually involves cytoskeletal ParA proteins, ATPases which can form dynamic filaments. In aerial hyphae of the mycelial bacterium Streptomyces coelicolor, ParA filaments extend over tens of microns and are responsible for segregation of dozens of chromosomes. We have identified a novel interaction partner of S. coelicolor ParA, ParJ. ParJ negatively regulates ParA polymerization in vitro and is important for efficient chromosome segregation in sporulating aerial hyphae. ParJ-EGFP formed foci along aerial hyphae even in the absence of ParA. ParJ, which is encoded by sco1662, turned out to be one of the five actinobacterial signature proteins, and another of the five is a ParJ paralogue. We hypothesize that polar growth, which is characteristic not only of streptomycetes, but even of simple Actinobacteria, may be interlinked with ParA polymer assembly and its specific regulation by ParJ., (© 2010 Blackwell Publishing Ltd.)