Search

Recent experiments proposed that the precipitated second-phase particles, such as L12-Al3Zr and S phase (Al2CuMg) in Al–Zn–Mg–Cu–Zr alloy, can efficiently trap enrichment H atoms, possibly weakening the H-induced damage of corresponding Al alloy. However, the change of mechanical properties of these precipitates with trapped H atom could not be explored experimentally. Here, taking intermetallic L12-Al3Zr as example, we performed a theoretical prediction to investigate the effect of trapped H on the mechanical properties of L12-Al3Zr. The results showed that although Al3ZrH compound with H located the at the geometric center is energetic and elastic stable, the lattice parameter of L12-Al3Zr seems to be expanded. The permeated H contributes to improve the hardness, brittleness and elastic anisotropy of L12-Al3Zr. In addition, we used a special method to obtain the numerical value of each (100) non-stoichiometric surface for both L12-Al3Zr and Al3ZrH compounds, providing a valuable supplement in calculating the surface energy of the non-stoichiometric surface for cubic structure.

Abstract Background The genus Sanicula L. is a unique perennial herb that holds important medicinal values. Although the previous studies on Sanicula provided us with a good research basis, its taxonomic system and interspecific relationships have not been satisfactorily resolved, especially for those endemic to China. Moreover, the evolutionary history of this genus also remains inadequately understood. The plastid genomes possessing highly conserved structure and limited evolutionary rate have proved to be an effective tool for studying plant phylogeny and evolution. Results In the current study, we newly sequenced and assembled fifteen Sanicula complete plastomes. Combined with two previously reported plastomes, we performed comprehensively plastid phylogenomics analyses to gain novel insights into the evolutionary history of this genus. The comparative results indicated that the seventeen plastomes exhibited a high degree of conservation and similarity in terms of their structure, size, GC content, gene order, IR borders, codon bias patterns and SSRs profiles. Such as all of them displayed a typical quadripartite structure, including a large single copy region (LSC: 85,074–86,197 bp), a small single copy region (SSC: 17,047–17,132 bp) separated by a pair of inverted repeat regions (IRs: 26,176–26,334 bp). And the seventeen plastomes had similar IR boundaries and the adjacent genes were identical. The rps19 gene was located at the junction of the LSC/IRa, the IRa/SSC junction region was located between the trnN gene and ndhF gene, the ycf1 gene appeared in the SSC/IRb junction and the IRb/LSC boundary was located between rpl12 gene and trnH gene. Twelve specific mutation hotspots (atpF, cemA, accD, rpl22, rbcL, matK, ycf1, trnH-psbA, ycf4-cemA, rbcL-accD, trnE-trnT and trnG-trnR) were identified that can serve as potential DNA barcodes for species identification within the genus Sanicula. Furthermore, the plastomes data and Internal Transcribed Spacer (ITS) sequences were performed to reconstruct the phylogeny of Sanicula. Although the tree topologies of them were incongruent, both provided strong evidence supporting the monophyly of Saniculoideae and Apioideae. In addition, the sister groups between Saniculoideae and Apioideae were strongly suggested. The Sanicula species involved in this study were clustered into a clade, and the Eryngium species were also clustered together. However, it was clearly observed that the sections of Sanicula involved in the current study were not respectively recovered as monophyletic group. Molecular dating analysis explored that the origin of this genus was occurred during the late Eocene period, approximately 37.84 Ma (95% HPD: 20.33–52.21 Ma) years ago and the diversification of the genus was occurred in early Miocene 18.38 Ma (95% HPD: 10.68–25.28 Ma). Conclusion The plastome-based tree and ITS-based tree generated incongruences, which may be attributed to the event of hybridization/introgression, incomplete lineage sorting (ILS) and chloroplast capture. Our study highlighted the power of plastome data to significantly improve the phylogenetic supports and resolutions, and to efficiently explore the evolutionary history of this genus. Molecular dating analysis explored that the diversification of the genus occurred in the early Miocene, which was largely influenced by the prevalence of the East Asian monsoon and the uplift of the Hengduan Mountains (HDM). In summary, our study provides novel insights into the plastome evolution, phylogenetic relationships, taxonomic framework and evolution of genus Sanicula.

IntroductionThe genus Sanicula L. is a taxonomically complicated taxa within Apiaceae, as its high variability in morphology. Although taxonomists have performed several taxonomic revisions for this genus, the interspecific relationships and species boundaries have not been satisfactorily resolved, especially for those endemic to China. This study mainly focused on S. giraldii var. ovicalycina, S. tienmuensis var. pauciflora, and S. orthacantha var. stolonifera and also described two new members of the genus.MethodsWe newly sequenced sixteen plastomes from nine Sanicula species. Combined with eleven plastomes previously reported by us and one plastome downloaded, we performed a comprehensively plastid phylogenomics analysis of 21 Sanicula taxa. Results and DiscussionThe comparative results showed that 21 Sanicula plastomes in their structure and features were highly conserved and further justified that two new species were indeed members of Sanicula. Nevertheless, eleven mutation hotspot regions were still identified. Phylogenetic analyses based on plastome data and the ITS sequences strongly supported that these three varieties were clearly distant from three type varieties. The results implied that these three varieties should be considered as three independent species, which were further justified by their multiple morphological characters. Therefore, revising these three varieties into three independent species was reasonable and convincing. Moreover, we also identified and described two new Sanicula species (S. hanyuanensis and S. langaoensis) from Sichuan and Shanxi, China, respectively. Based on their distinct morphological characteristics and molecular phylogenetic analysis, two new species were included in Sanicula. In summary, our study impelled the revisions of Sanicula members and improved the taxonomic system of the genus.

Abstract In order to combat the impact of the dead zone and reduce vibration of the space robot's elastic base and flexible links, the trajectory tracking and vibration suppression of a multi-flexible-link free-floating space robot system are addressed. First, the elastic connection between the base and the link is considered as a linear spring. Then the assumed mode approach is used to derive the dynamic model of the flexible system. Secondly, a slow subsystem characterizing the rigid motion and a fast subsystem relating to vibration of the elastic base and multiple flexible links are generated utilizing two-time scale hypotheses of singular perturbation. For the slow subsystem with a dead zone in joint input torque, a dynamic surface control method with adaptive fuzzy approximator is designed. Dynamic surface control scheme is adopted to avoid calculation expansion and to simplify calculation. The fuzzy logic function is applied to approximate uncertain terms of the dynamic equation including the dead zone errors. For the fast subsystem, an optimal linear quadratic regulator controller is used to suppress the vibration of the multiple flexible links and elastic base, ensuring the stability and tracking accuracy of the system. Lastly, the simulation results verify the effectiveness of the proposed control strategy.

Abstract Background Mechanical ventilation during general anesthesia may impair airway mucosal function. This study aimed to investigate the effect of pressure-controlled ventilation-volume guaranteed (PCV-VG) on bronchial mucus transport velocity (BTV) in patients during laparoscopic surgery for gynecological oncology compared with volume controlled ventilation (VCV). Methods 66 patients undergoing elective a laparoscopic surgery for gynecological oncology. The patients were randomized into two group receiving either PCV-VG or VCV. a drop of methylene blue was placed on the surface of the airway mucosa under the bronchoscopeand, then the distance the dye movement was measured after 2, 4, and 6 min. Outcomes were assessed at T0 (5 min after endotracheal intubation and before initiation of pneumoperitoneum), T1 and T2 (1 and 2 h after stabilization of pneumoperitoneum respectively). BTV at T0, T1 and T2 was the primary outcome. Secondary outcomes included heart rate (HR), mean arterial pressure (MAP), body temperature, end-tidal CO2 pressure (PETCO2), tidal volume(VT), peak inspiratory pressure (PIP), mean inspiratory pressure (Pmean), respiratory rate (RR), and dynamic compliance (CDyn) at T0, T1, and T2. Results 64 patients were included in the analysis. The median [interquartile range] BTV was significantly lower in VCV group at T1 and T2 that at T0 (P 0.05). Compared with the PCV-VG group, BTV in VCV group significantly decreased at T2 (P

The crown root system is the most important root component in maize at both the vegetative and reproductive stages. However, the genetic basis of maize crown root traits (CRT) is still unclear, and the relationship between CRT and aboveground agronomic traits in maize is poorly understood. In this study, an association panel including 531 elite maize inbred lines was planted to phenotype the CRT and aboveground agronomic traits in different field environments. We found that root traits were significantly and positively correlated with most aboveground agronomic traits, including flowering time, plant architecture and grain yield. Using a genome-wide association study (GWAS) coupled with resequencing, a total of 115 associated loci and 22 high-confidence candidate genes were identified for CRT. Approximately one-third of the genetic variation in crown root was co-located with 46 QTLs derived from flowering and plant architecture. Furthermore, 103 (89.6%) of 115 crown root loci were located within known domestication- and/or improvement-selective sweeps, suggesting that crown roots might experience indirect selection in maize during domestication and improvement. Furthermore, the expression of Zm00001d036901, a high-confidence candidate gene, may contribute to the phenotypic variation in maize crown roots, and Zm00001d036901 was selected during the domestication and improvement of maize. This study promotes our understanding of the genetic basis of root architecture and provides resources for genomics-enabled improvements in maize root architecture.

Phosphorus (P) is an important nutrient for plants, and a lack of available P greatly limits plant growth and development. Phosphate-solubilizing microorganisms (PSMs) significantly enhance the ability of plants to absorb and utilize P, which is important for improving plant nutrient turnover and yield. This article summarizes and analyzes how PSMs promote the absorption and utilization of P nutrients by plants from four perspectives: the types and functions of PSMs, phosphate-solubilizing mechanisms, main functional genes, and the impact of complex inoculation of PSMs on plant P acquisition. This article reviews the physiological and molecular mechanisms of phosphorus solubilization and growth promotion by PSMs, with a focus on analyzing the impact of PSMs on soil microbial communities and its interaction with root exudates. In order to better understand the ability of PSMs and their role in soil P transformation and to provide prospects for research on PSMs promoting plant P absorption. PSMs mainly activate insoluble P through the secretion of organic acids, phosphatase production, and mycorrhizal symbiosis, mycorrhizal symbiosis indirectly activates P via carbon exchange. PSMs can secrete organic acids and produce phosphatase, which plays a crucial role in soil P cycling, and related genes are involved in regulating the P-solubilization ability. This article reviews the mechanisms by which microorganisms promote plant uptake of soil P, which is of great significance for a deeper understanding of PSM-mediated soil P cycling, plant P uptake and utilization, and for improving the efficiency of P utilization in agriculture.

IntroductionSugarcane endophytic nitrogen-fixing bacterium Klebsiella variícola DX120E displayed broad impact on growth, but the exact biological mechanism, especially polyamines (PAs) role, is still meager.MethodsTo reveal this relationship, the content of polyamine oxidase (PAO), PAs, reactive oxygen species (ROS)-scavenging antioxidative enzymes, phytohormones, 1-aminocyclopropane-1-carboxylic synthase (ACS), chlorophyll content, and biomass were determined in sugarcane incubated with the DX120E strain. In addition, expression levels of the genes associated with polyamine metabolism were measured by transcriptomic analysis.ResultsGenomic analysis of Klebsiella variícola DX120E revealed that 39 genes were involved in polyamine metabolism, transport, and the strain secrete PAs in vitro. Following a 7-day inoculation period, DX120E stimulated an increase in the polyamine oxidase (PAO) enzyme in sugarcane leaves, however, the overall PAs content was reduced. At 15 days, the levels of PAs, ROS-scavenging antioxidative enzymes, and phytohormones showed an upward trend, especially spermidine (Spd), putrescine (Put), catalase (CAT), auxin (IAA), gibberellin (GA), and ACS showed a significant up-regulation. The GO and KEGG enrichment analysis found a total of 73 differentially expressed genes, involving in the cell wall (9), stimulus response (13), peroxidase activity (33), hormone (14) and polyamine metabolism (4).DiscussionThis study demonstrated that endophytic nitrogen-fixing bacteria stimulated polyamine metabolism and phytohormones production in sugarcane plant tissues, resulting in enhanced growth. Dual RNA-seq analyses provided insight into the early-stage interaction between sugarcane seedlings and endophytic bacteria at the transcriptional level. It showed how diverse metabolic processes selectively use distinct molecules to complete the cell functions under present circumstances.

Mg-Cu alloys are promising antibacterial implant materials. However, their clinical applications have been impeded by their high initial biodegradation rate, which can be alleviated using nanotechnology by for example surface nanomodification to obtain a gradient nanostructured surface layer. The present work (i) produced a gradient nanostructured surface layer with a ∼500 µm thickness on a Mg-0.2 Cu alloy by a surface mechanical grinding treatment (SMGT), and (ii) studied the biodegradation behavior in Hank's solution. The initial biodegradation rate of the SMGTed samples was significantly lower than that of the unSMGTed original counterparts, which was attributed to the surface nanocrystallization, and the fragmentation and re-dissolution of Mg2Cu particles in the surface of the SMGTed Mg-0.2 Cu alloy. Furthermore, the SMGTed Mg-0.2 Cu alloy had good antibacterial efficacy. This work creatively used SMGT technology to produce a high-performance Mg alloy implant material.

The microwave treatment is commonly applied to flaxseed to release nutrients, inactivate enzymes, remove cyanogens, and intensify flavors. The current study aimed to explore the influences of microwave exposure on the antioxidant and interfacial properties of flaxseed protein isolates (FPI), focusing on the altering composition and molecular structure. The results showed that after microwave exposure (700 W, 1–5 min), more compact assembly of storage proteins and subsequent permeation by membrane fragments of oil bodies occurred for cold-pressing flaxseed flours. Moreover, the particle sizes of FPI was progressively reduced with the decrement ranged from 37.84 to 60.66% (P