Search

the best ways in order to reduce fuel consumption for vehicles. It consists of associating an electric motor next to the classical thermal machine. In this embedded system, the efficiency and the torque per unit mass are very important. So it seems to be a good idea to use a permanent magnet synchronous machine, which is recognized for satisfying these two objectives. Since the allocated volume is rather flat, axial flux topologies are interesting. This paper’s goal is to propose an optimal first design method for such structures, given the allocated volume and the machine requirements. La traction hybride semble actuellement un des moyens les plus prometteurs pour réduire la consommation de carburant des véhicules. Ce procédé consiste à associer un moteur électrique au moteur thermique traditionnel. Pour une telle application embarquée, le rendement, ainsi que le couple massique, sont des critères de conception de première importance. Dans ce contexte, le recours à une machine synchrone à aimants permanents, reconnue pour satisfaire ces deux critères, semble être approprié. Vu que le volume alloué à la machine électrique est de forme discoïde, les topologies à flux axial semblent les plus intéressantes. L’objectif de cet article est de proposer une méthodologie de pré-dimensionnement de tels actionneurs, en ayant fixé au préalable le volume maximal permis ainsi que le cahier des charges de la machine.

Comprehensive assessment of the magnetic behavior of grain-oriented steel (GO) Fe–Si sheets, going beyond the conventional characterization at power frequencies along the rolling direction (RD), can be the source of much needed information for the optimal design of transformers and efficient rotating machines. However, the quasi-monocrystal character of the material is conducive, besides an obviously strong anisotropic response, to a dependence of the measured properties on the sample geometry whenever the field is applied along a direction different from the rolling and the transverse (TD) directions. In this work, we show that the energy losses, measured from 1 to 300 Hz on GO sheets cut along directions ranging from 0° to 90° with respect to RD, can be interpreted in terms of linear composition of the same quantities measured along RD and TD. This feature, which applies to both the DC and AC properties, resides on the sample geometry-independent character of the RD and TD magnetization and on the loss separation principle. This amounts to state that, as substantiated by magneto-optical observations, the very same domain wall mechanisms making the magnetization to evolve in the RD and TD sheets, respectively, independently combine and operate in due proportions in all the other cases. By relying on these concepts, which overcome the limitations inherent to the semi-empirical models of the literature, we can consistently describe the magnetic losses as a function of cutting angle and stacking fashion of GO strips at different peak polarization levels and different frequencies. [ABSTRACT FROM AUTHOR]

We investigate in theory and experiment the frequency dependence of magnetic losses in Grain-Oriented 0.29 mm thick high-permeability steel sheets up to 10 kHz. Such an unusually broad frequency range, while responding to increasing trends towards high-frequency regimes in applications, is conducive to a complex evolution of the magnetization process, as imposed by increasing frequencies to a non-linear high-permeability saturable material. We show that the concept of loss decomposition, supported by observations of the domain wall dynamics through Kerr experiments, is effective in the assessment of the broadband frequency dependence of the energy loss. By calculating, in particular, the instantaneous and time averaged macroscopic induction profiles across the sheet thickness through the Maxwell's diffusion equation, the classical loss component Wclass, versus frequency f and peak polarization Jp, is obtained. A simplified theoretical approach is pursued in this case by identifying the normal magnetization curve with the magnetic constitutive equation of the material. While the hysteresis loss Whyst is shown to invariably increase with frequency, the excess loss Wexc, the quantity directly associated with the eddy currents circulating around the moving domain walls, tends to vanish upon increasing both frequency and induction values. The Kerr experiments actually show that, while the oscillating 180° domain walls can adjust to the depth of the induction profile by bowing at low Jp values, the magnetization reversal at high inductions and high frequencies occurs by inward motion of symmetric fronts originating at the sheet surface, according to a classical framework. [ABSTRACT FROM AUTHOR]

By means of a newly developed broadband measuring setup we have overcome the usual upper limit for the test frequency, around a few hundred Hz, which is encountered in the two-dimensional characterization of magnetic steel sheets at technical inductions and we have measured the rotational losses in low-carbon steels up to 1 kHz and peak induction 1.7 T. An important piece of information is thus retrieved upon a frequency range useful to predict the performance of high-speed electrical machines. Our experiments, performed on thick (0.640 mm) laminations, have brought to light the emergence of the skin effect under rotational fields. This is revealed by an abrupt deviation of the excess loss component, calculated under the conventional loss separation procedure, from its well-known linear dependence on the square root of the frequency. A simple magnetic constitutive law under rotating induction is proposed and introduced into the electromagnetic diffusion equation, which is solved by finite elements coupled to a non-linear algorithm. The classical rotational eddy current loss, largely prevalent with respect to the hysteresis and excess loss components on approaching the kHz frequencies in low-carbon steels, is then calculated in the presence of skin effect, permitting one to achieve full analysis of the rotational losses and good predicting capability upon a broad range of frequencies and peak inductions. [ABSTRACT FROM AUTHOR]

We describe a 3-D analytical model based on formal resolution of Maxwell's equations of a permanent-magnet linear actuator, with circular-shaped magnets. We present all details of the 3-D analytical calculation for the no-load flux and then compare results obtained by this model to those obtained by 3-D finite-element analysis. The comparisons show a good agreement between the two models and so validate our analytical model. Unlike 3-D finite-element analyses, which are time consuming, the analytical models that we present in this paper are suitable for an optimization process of such a structure. [ABSTRACT FROM AUTHOR]

In this paper, an analytical method for the calculation of the electromagnetic field in the airgap of a permanent-magnet synchronous machine is developed, so as to compute the torque of the machine. Such a work is applicable to different machine topologies (even for salient rotor ones), when a two dimensional approximation of the structure is possible. This analytical model can be useful in an optimization task. In the first part, the analytical method of the field computation is explained in detail, both for the magnet's field, and for the armature reaction field. The results are compared to finite elements analysis. [ABSTRACT FROM AUTHOR]

This paper deals with the problem of loss evaluation in Soft Magnetic Composites (SMCs), focusing on the classical loss component. It is known that eddy currents can flow in these granular materials at two different scales, that of the single particle (microscopic eddy currents) and that of the specimen cross-section (macroscopic eddy currents), the latter ensuing from imperfect insulation between particles. It is often argued that this macroscopic loss component can be calculated considering an equivalent homogeneous material of same bulk resistivity. This assumption has not found so far clear and general experimental validation. In this paper, we discuss energy loss experiments in two different SMC materials, obtained using different binder types, and we verify that a classical macroscopic loss component, the sole size-dependent term, can be separately identified. It is also put in evidence that, depending on the material, the measured sample resistivity and the equivalent resistivity entering the calculation of the macroscopic eddy currents may not be the same. A corrective coefficient is, therefore, introduced and experimentally identified. This coefficient appears to depend on the material type only. An efficient way to calculate the macroscopic classical loss in these materials is thus provided. [ABSTRACT FROM AUTHOR]

We present novel results on magnetic losses in soft magnetic composites (SMCs) excited with rotating field. Soft composites are very promising in electrical engineering applications, where new topologies of electrical machines with two- and three-dimensional induction loci are increasingly found. An experimental characterization of industrial SMC products has, therefore, been carried out, up to the kilohertz range, under alternating and circular flux loci, making use of a specifically designed and optimized loss measuring setup. The obtained results have been analyzed for all kinds of excitation, according to the loss separation concept, with the emphasis being placed on the relationship between the rotational and the alternating loss components. In particular, it is found that the ratio between the rotational and the alternating losses is, for any given peak induction, independent of frequency. [ABSTRACT FROM AUTHOR]

We report and discuss significant results on the magnetic losses and their frequency dependence insoft magnetic composites. Two types of bonded Fe-based materials have been characterized atdifferent inductions from dc to 10 kHz and analyzed by extending the concept of loss separation and the related statistical theory to the case of heterogeneous materials. Starting from the experimental evidence of eddy current confinement inside the individual particles, the classical losscomponent is calculated for given particle size distribution. Taking then into account thecontribution of the experimentally determined quasistatic (hysteresis) loss, the excess losscomponent is obtained and quantitatively assessed. Its behavior shows that the dynamichomogenization of the magnetization process with frequency, a landmark feature of magnetic laminations, is restrained in these materials. This results into a partial offset of the loss advantage offered by the eddy current confinement. [ABSTRACT FROM AUTHOR]