Search

Abstract Background Paired sets and alternative set configurations (e.g., cluster sets) are frequently employed by strength and conditioning practitioners; however, their synergistic impact remains underexplored in research. This study aimed to elucidate whether the set configuration used in a lower-body exercise affects mechanical performance during paired sets of upper-body exercises. Methods Twenty-one resistance-trained individuals (14 men and 7 women) randomly completed three experimental sessions that involved four sets of five repetitions at 75%1RM during both the bench press and bench pull exercises. The three experimental sessions varied solely in the activity conducted during the inter-set rest periods of each upper-body exercise: (i) Traditional squat – six squat repetitions without intra-set rest at 65%1RM; (ii) Rest redistribution squat – two clusters of three repetitions of the squat exercise at 65%1RM with 30 s of intra-set rest; and (iii) Passive rest – no exercise. Results The rest redistribution set configuration allowed the sets of the squat exercise to be performed at a faster velocity than the traditional set configuration (p = 0.037). However, none of the mechanical variables differed between the exercise protocols neither in the bench press (p ranged from 0.279 to 0.875) nor in the bench pull (p ranged from 0.166 to 0.478). Conclusions Although rest redistribution is an effective strategy to alleviate fatigue during the sets in which it is implemented, it does not allow subjects to perform better in subsequent sets of the training session.

Background: The use of elastomeric technology in sports garments is increasing in popularity; however, its specific impact on physiological and psychological variables is not fully understood. Thus, we aimed to analyze the physiological (muscle activation of the pectoralis major, triceps brachii, anterior deltoid, and rectus abdominis, capillary blood lactate, systolic and diastolic blood pressure, and heart rate) and psychological (global and respiratory rating of perceived exertion [RPE]) responses during an incremental treadmill test wearing a new sports garment for the upper body that incorporates elastomeric technology or a placebo garment.Methods: Eighteen physically active young adults participated in two randomized sessions, one wearing the elastomeric garment and the other wearing a placebo. Participants performed in both sessions the same treadmill incremental test (i.e., starting at 8 km/h, an increase of 2 km/h each stage, stage duration of 3 min, and inclination of 1%; the test ended after completing the 18 km/h Stage or participant volitional exhaustion). The dependent variables were assessed before, during, and/or after the test. Nonparametric tests evaluated differences.Results: The elastomeric garment led to a greater muscle activation (p < 0.05) in the pectoralis major at 16 km/h (+33.35%, p = 0.01, d = 0.47) and 18 km/h (+32.09%, p = 0.02, d = 0.55) and in the triceps brachii at 10 km/h (+20.28%, p = 0.01, d = 0.41) and 12 km/h (+34.95%, p = 0.04, d = 0.28). Additionally, lower lactate was observed at the end of the test (−7.81%, p = 0.01, d = 0.68) and after 5 min of recovery (−13.71%, p < 0.001, d = 1.00) with the elastomeric garment. Nonsignificant differences between the garments were encountered in the time to exhaustion, cardiovascular responses, or ratings of perceived exertion.Conclusion: These findings suggest that elastomeric garments enhance physiological responses (muscle activation and blood lactate) during an incremental treadmill test without impairing physical performance or effort perception.

Bodybuilding is characterized by high-rates of sport supplementation. This is the first study to compare the supplementation patterns of winners (WB) and non-winners (NWB) among international natural bodybuilders during contest preparation. Fifty-six natural bodybuilders (5 women) (age = 28.85 ± 8.03 years; final body mass = 71.50 ± 10.28 kg), 19 WB (athletes who had achieved victory in an official natural bodybuilding championship at least once) and 37 NWB (athletes who never achieved victory), from 18 countries (55.36% from Spain) responded to this cross-sectional online survey related to their nutritional habits, strategies and supplementation practices. WB were significantly older (p = 0.024), completed more competitive seasons (p = 0.027) and participated in more competitions in the last contest year (p = 0.011). There were no significant differences between WB and NWB for years training for bodybuilding (p = 0.055), weeks of dieting for competition (p = 0.392), and body weight at the start (p = 0.553) and end (p = 0.330) of the season. Beverage and supplement consumption, purchasing patterns, and information sources did not differ between groups (p > 0.05). In conclusion, natural bodybuilding WB tended to be older and had more competitive experience, but shared similar supplementation protocols to NWB. Athletes' supplementation patterns were influenced by different sources of information. However, these natural bodybuilders mainly purchased their supplements through the internet without guidance from a coach or dietitian.

This study aimed to explore whether the relationship between perceptual (rating of perceived exertion; RPE) and mechanical (maximal number of repetitions completed [MNR], fastest set velocity, and mean velocity decline) variables is affected by the length of inter-set rest periods during resistance training sets not leading to failure. Twenty-three physically active individuals (15 men and eight women) randomly completed 12 testing sessions resulting from the combination of two exercises (bench press and bench pull), three inter-set rest protocols (1, 3, and 5 min), and two minimal velocity thresholds (farther from muscular failure [MVT0.45 for bench press and MVT0.65 for bench pull] and closer to muscular failure [MVT0.35 for bench press and MVT0.55 for bench pull]). The duration of inter-set rest periods did not have a significant impact on RPE values (p ranged from 0.061 to 0.951). Higher proximities to failure, indicated by lower MVTs, were associated with increased RPE values (p < 0.05 in 19 out of 24 comparisons). Moreover, as the number of sets increased, an upward trend in RPE values was observed (p < 0.05 in seven out of 12 comparisons). Finally, while acknowledging some inconsistencies, it was generally observed that higher magnitudes of the mechanical variables, especially MNR (rs < −0.55 in three out of four comparisons), were associated with lower RPE values. These results, which were comparable for the bench press and bench pull exercises, suggest that post-set RPE values are affected by the fatigue experienced at both the beginning and end of the set.

Background: Strength and conditioning experts widely recognize the dynamic strength index (DSI) as a tool for assessing an athlete’s ability to utilize strength in dynamic actions. The DSI is calculated as the ratio of peak force in dynamic actions versus isometric ones. To date, the influence of fatigue on the DSI is still not fully understood. This study aimed to explore the effects of both dynamic and isometric fatigue tasks on the DSI. Methods: A total of 24 physically active participants underwent fatigue tests involving repeated countermovement jumps (dynamic) and repeated isometric mid-thigh pulls (isometric) in separate visits. Results: The results revealed a marked drop in performance, with dynamic force showing a more significant reduction (p < 0.001; d = 1.57) than isometric force (p = 0.015; d = 0.30). After the isometric fatigue task, the DSI increased, indicating a more substantial decline in isometric force (p < 0.001; d = 1.75) compared to dynamic force (p = 0.313; d = 0.08). Following this trend, the DSI decreased post-dynamic fatigue (p < 0.001; d = 0.99) and increased post-isometric fatigue (p < 0.001; d = 3.11). Conclusion: This research underscores the need to consider fatigue’s task-specific effects on the DSI, enabling more tailored training methodologies for athletes.

Objective: Phenylcapsaicin (PC) is a new capsaicin analog which has exhibited a higher bioavailability. This sudy assessed the effects of a low dose (LD) of 0.625 mg and a high dose (HD) of 2.5 mg of PC on aerobic capacity, substrate oxidation, energy metabolism and exercise physiological variables in young males.Materials and methods: Seventeen active males (age = 24.7 ± 6.0 years) enrolled to this randomized, triple-blinded, placebo-controlled, crossover trial. Participants attended the laboratory on 4 sessions separated by 72–96 h. A submaximal exercise test [to determine maximal fat oxidation (MFO) and the intensity at MFO (FATmax)] followed by a maximal incremental test (to determine VO2max) were performed in a preliminary session. The subsequent sessions only differed in the supplement ingested [LD, HD or placebo (PLA)] and consisted of a steady-state test (60 min at FATmax) followed by a maximal incremental test. Energy metabolism, substrate oxidation, heart rate, general (gRPE) and quadriceps (RPEquad) rate of perceived exertion, skin temperature and thermal perception were tested.Results: Clavicle thermal perception was lower in HD compared to PLA and LD (p = 0.04) across time. HD reduced maximum heart rate in comparison to PLA and LD (p = 0.03). LD reported higher general RPE (RPEg) values during the steady-state test compared to PLA and HD across time (p = 0.02). HD and LD elicited higher peak of fat oxidation during the steady-state test compared with PLA (p = 0.05). Intra-test analyses revealed significant differences for fat oxidation (FATox) in favor of HD and LD compared to PLA (p = 0.002 and 0.002, respectively), and for carbohydrate oxidation (CHOox) (p = 0.05) and respiratory exchange ratio (RER) (p = 0.03) for PLA. In the incremental test, only general RPE at 60% of the maximal intensity (W) differed favoring HD (p ≤ 0.05).Conclusion: Therefore, PC may contribute to increase aerobic capacity through the improvement of fat oxidation, maximum heart rate and perceptual responses during exercise.

Background: Trunk rotator strength plays an important role in sports performance and health. A reliable method to assess these muscles with functional electromechanical dynamometer has not been described. Therefore, the objectives of this paper were (I) to explore the reliability of different strength variables collected in isokinetic and isometric conditions during two trunk rotator exercises, and (II) to determine the relationship of isometric and dynamic strength variables collected in the same exercise. Methods: A repeated measures design was performed to evaluate the reliability of the horizontal cable woodchop (HCW) and low cable woodchop (LCW) exercises. Reliability was assessed using t-tests of paired samples for the effect size, the standard error of measurement, the coefficient of variation (CV) and the intraclass correlation coefficient (ICC). The Pearson’s (r) correlation coefficient was used to explore the association between isometric and isokinetic tests. Results: HCW exercise is more reliable than LCW exercise in assessing trunk rotator muscles. The strength manifestation that should be used is the average strength, and the most reliable evaluation was the HCW at 0.40 m·s−1 concentric (ICC = 0.89; CV = 10.21%) and eccentric (ICC = 0.85; CV = 9.33%) contraction and the dynamic condition that most correlated with the isometric was LWC at 0.50 m·s−1 (r = 0.83; p < 0.01). Conclusion: HCW is a reliable exercise to measure trunk rotator muscles.

Background The aim of the present study was to explore whether military-specific reaction time (RT) test performance is affected by individuals’ physical and visual skills. Method In a single testing session, the military-specific Simple and Go, No-Go RT, aerobic power (20-m Multistage Shuttle Run test), maximal upper- and lower-body mechanical capacities (bench press and squat against different loads), and visual skills (multiple object tracking and dynamic visual acuity) of 30 young men (15 active-duty military personnel and 15 sport science students) were evaluated. Results The main findings revealed that the Simple RT and Go, No-Go RT presented (1) with aerobic power non-significant small correlations in military personnel (r = −0.39 and −0.35, respectively) and non-significant negligible correlations in sport science students (r = −0.10 and 0.06, respectively), (2) inconsistent and generally non-significant correlations with the maximal mechanical capacities of the upper- and lower-body muscles (r range = −0.10, 0.67 and −0.27, 0.48, respectively), (3) non-significant correlations with visual skills (r magnitude ≥ 0.58) with the only exception of the Go, No-Go RT that was significantly correlated to all visual variables in the group of students (i.e., students who achieved better results during visual tests had shorter RT; r magnitude ≥ 0.58), and (4) none of the physical and visual variables significantly predicted the Simple RT or Go, No-Go RT. Conclusion Altogether, these results indicate that military-specific RT performance is generally independent of physical and visual skills in both military personnel and active university students.

The purpose of the present study was (i) to explore the reliability of the most commonly used countermovement jump (CMJ) metrics, and (ii) to reduce a large pool of metrics with acceptable levels of reliability via principal component analysis to the significant factors capable of providing distinctive aspects of CMJ performance. Seventy-nine physically active participants (thirty-seven females and forty-two males) performed three maximal CMJs while standing on a force platform. Each participant visited the laboratory on two occasions, separated by 24–48 h. The most reliable variables were performance variables (CV = 4.2–11.1%), followed by kinetic variables (CV = 1.6–93.4%), and finally kinematic variables (CV = 1.9–37.4%). From the 45 CMJ computed metrics, only 24 demonstrated acceptable levels of reliability (CV ≤ 10%). These variables were included in the principal component analysis and loaded a total of four factors, explaining 91% of the CMJ variance: performance component (variables responsible for overall jump performance), eccentric component (variables related to the breaking phase), concentric component (variables related to the upward phase), and jump strategy component (variables influencing the jumping style). Overall, the findings revealed important implications for sports scientists and practitioners regarding the CMJ-derived metrics that should be considered to gain a comprehensive insight into the biomechanical parameters related to CMJ performance.

This study aimed to elucidate whether ballistic, maximal strength and strength-endurance performances are affected by the sex of the evaluator. Sixteen young male handball players attended two testing sessions that only differed in the sex of the evaluators (2 women vs. 2 men). The two sessions were performed in a counterbalanced order. Ballistic performance (countermovement jump height and throwing velocity), maximal strength performance (squat and bench press [BP] one-repetition maximum [1RM]), and strength-endurance performance (number of repetitions-to-failure in BP and average velocity of the set in the squat) were assessed in both sessions. BP 1RM was greater in the presence of women evaluators (p = 0.036, ES = 0.09), whereas no differences were observed for the remaining variables (p ≥ 0.254, ES ≤ 0.19). Low correlations (r median [range] = -0.074 [-0.693, 0.326]) were observed between the different performance tests for the percent differences between both testing sessions. The sex of the evaluators has minimal influence on a number of physical traits in young male handball players when they are tested in the presence of other members of the team, while the low correlations indicate that a higher performance in one test under the presence of women does not imply a higher performance under the presence of women in other performance tests.

This study aimed to evaluate the between-session reliability of single-leg performance and asymmetry variables during unilateral and bilateral countermovement jumps (CMJ). Twenty-three basketball players completed two identical sessions which consisted of four unilateral CMJs (two with each leg) and two bilateral CMJs. Mean and peak values of force, velocity and power, impulse, and jump height were obtained separately for each leg using a dual force platform. All performance variables presented an acceptable reliability (CVrange = 4.05-9.98%) with the exceptions of jump height for the unilateral CMJs and mean power, peak velocity, peak power, and impulse for the left leg during the bilateral CMJ (CV≥11.0%). Nine out of 14 variables were obtained with higher reliability during the unilateral CMJ (CVratio≥1.16), and 4 out of 14 during the bilateral CMJ (CVratio≥1.32). Asymmetry variables always showed an unacceptable reliability (ICCrange = 0.15-0.64) and poor/slight levels of agreement in direction (Kapparange = -0.10 to 0.15) for the unilateral CMJ, while an acceptable reliability (ICCrange = 0.74-0.77) and substantial levels of agreement in direction (Kapparange = 0.65 to 0.74) were generally obtained for the bilateral CMJ. These results suggest that single-leg performance can be obtained with higher reliability during the unilateral CMJ, while the bilateral CMJ provides more consistent measures of inter-limb asymmetries.

Background This study aimed to determine the reliability of the velocity achieved during the last repetition of sets to failure (Vlast) and the association of Vlast with the velocity of the 1-repetition maximum (V1RM) during the paused and touch-and-go bench press (BP) exercises performed in a Smith machine. Methods A total of 96 healthy men participated in this study that consisted of two testing sessions. A single BP variant (paused BP or touch-and-go BP) was evaluated on each session in a randomized order. Each session consisted of an incremental loading test until reaching the 1RM, followed by two sets of repetitions to failure against a load ranging from 75% to 90% of 1RM. Results The reliability of Vlast was unacceptable for both BP variants (CV > 18.3%, ICC < 0.60). The correlations between V1RM and Vlast were small for the paused BP (r = 0.18) and moderate for the touch-and-go BP (r = 0.37). Conclusions Although these results suggest that Vlast could be a better indicator of the minimal velocity threshold than V1RM, the low reliability of Vlast and the similar values of Vlast for both BP variants suggest that a standard V1RM should be used to estimate the 1RM from the individualized load-velocity relationship.

Background This study aimed (I) to assess the inter-rater agreement for measuring the mean velocity (MV) of the barbell with the iLOAD® app, and (II) to compare the magnitude of the MV and total work of a training session between the iLOAD® app and a linear encoder (reference method). Method Sixteen young healthy individuals (four women and 12 men) were tested in two sessions separated by 48 h. The 10 repetition maximum (RM) load was determined in the first testing session in the half squat exercise. The second testing session consisted of 3 sets of 10 repetitions during the half squat exercise performed against the 10RM load. Both the iLOAD® app and a linear encoder were used to calculate the MV and total work of each training set. MV was recorded with the iLOAD® app by two independent researchers to evaluate the inter-rater agreement. Results Trivial differences and nearly perfect correlations were observed between raters for the MV values collected under individual sets (effect size [ES] ≤ 0.02, r ≥ 0.987), as well as for the whole training session (ES = 0.01, r = 0.997). Trivial-small differences and nearly perfect correlations were observed between the iLOAD® app and the linear encoder (Chronojump, Barcelona, Spain) for MV (EV ≤ 0.25, r ≥ 0.903) and total work (ES ≤ 0.05, r ≥ 0.973). Bland-Altman plots did not reveal heteroscedasticity of the errors between the iLOAD® app and the linear encoder for MV (r2 = 0.010) and total work (r2

This aims of this study were (I) to determine the velocity variable and regression model which best fit the load-velocity relationship during the free-weight prone bench pull exercise, (II) to compare the reliability of the velocity attained at each percentage of the one-repetition maximum (1RM) between different velocity variables and regression models, and (III) to compare the within- and between-subject variability of the velocity attained at each %1RM. Eighteen men (14 rowers and four weightlifters) performed an incremental test during the free-weight prone bench pull exercise in two different sessions. General and individual load-velocity relationships were modelled through three velocity variables (mean velocity [MV], mean propulsive velocity [MPV] and peak velocity [PV]) and two regression models (linear and second-order polynomial). The main findings revealed that (I) the general (Pearson's correlation coefficient [r] range = 0.964-0.973) and individual (median r = 0.986 for MV, 0.989 for MPV, and 0.984 for PV) load-velocity relationships were highly linear, (II) the reliability of the velocity attained at each %1RM did not meaningfully differ between the velocity variables (coefficient of variation [CV] range = 2.55-7.61% for MV, 2.84-7.72% for MPV and 3.50-6.03% for PV) neither between the regression models (CV range = 2.55-7.72% and 2.73-5.25% for the linear and polynomial regressions, respectively), and (III) the within-subject variability of the velocity attained at each %1RM was lower than the between-subject variability for the light-moderate loads. No meaningful differences between the within- and between-subject CVs were observed for the MV of the 1RM trial (6.02% vs. 6.60%; CVratio = 1.10), while the within-subject CV was lower for PV (6.36% vs. 7.56%; CVratio = 1.19). These results suggest that the individual load-MV relationship should be determined with a linear regression model to obtain the most accurate prescription of the relative load during the free-weight prone bench pull exercise.