Search

Abstract The triboelectric effect is a ubiquitous phenomenon in which the surfaces of two materials are easily charged during the contact‐separation process. Despite the widespread consequences and applications, the charging mechanisms are not sufficiently understood. Here, the authors report that, in the presence of a strain gradient, the charge transfer is a result of competition between flexoelectricity and triboelectricity, which could enhance charge transfer during triboelectric measurements when the charge transfers of both effects are in the same direction. When they are in the opposite directions, the direction and amount of charge transfer could be modulated by the competition between flexoelectric and triboelectric effects, which leads to a distinctive phenomenon, that is, the charge transfer is reversed with varying forces. The subsequent results on the electrical power output signals from the triboelectrification support the proposed mechanism. Therefore, the present study emphasizes the key role of the flexoelectric effect through experimental approaches, and suggests that both the amount and direction of charge transfer can be modulated by manipulating the mixed triboelectric and flexoelectric effects. This finding may provide important information on the triboelectric effect and can be further extended to serve as a guideline for material selection during a nanopatterned device design.

Abstract Piezoelectric and ferroelectric materials have garnered significant interest owing to their excellent physical properties and multiple potential applications. Accordingly, the need for evaluating piezoelectric and ferroelectric properties has also increased. The piezoelectric and ferroelectric properties are evaluated macroscopically using laser interferometers and polarization–electric field loop measurements. However, as the research focus is shifted from bulk to nanosized materials, scanning probe microscopy (SPM) techniques have been suggested as an alternative approach for evaluating piezoelectric and ferroelectric properties. In this Progress Report, the recent progress on the nanoscale evaluation of piezoelectric and ferroelectric properties of diverse materials using SPM‐based methods is summarized. Among the SPM techniques, the focus is on recent studies that are related to piezoresponse force microscopy and conductive atomic force microscopy; further, the utilization of these two modes to understand piezoelectric and ferroelectric properties at the nanoscale level is discussed. This work can provide guidelines for evaluating the piezoelectric and ferroelectric properties of materials based on SPM techniques.

Electromechanical (EM) response in ion conductive ceramics with piezoelectric inclusions was spatially explored using strain-based atomic force microscopy. Since the sample is composed of two dominant phases of ionic and piezoelectric phases, it allows us to explore two different EM responses of electrically induced ionic response and piezoresponse over the same surface. Furthermore, EM response of the ionic phase, i.e., electrochemical strain, was quantitatively investigated from the comparison with that of the piezoelectric phase, i.e., piezoresponse. These results could provide additional information on the EM properties, including the electrochemical strain at nanoscale. [ABSTRACT FROM AUTHOR]

Piezoresponse force microscopy (PFM) has provided advanced nanoscale understanding and analysis of ferroelectric and piezoelectric properties. In PFM-based studies, electromechanical strain induced by the converse piezoelectric effect is probed and analyzed as a PFM response. However, electromechanical strain can also arise from several non-piezoelectric origins that may lead to a misinterpretation of the observed response. Among them, electrostatic interaction can significantly affect the PFM response. Nonetheless, previous studies explored solely the influence of electrostatic interaction on the PFM response under the situation accompanied with polarization switching. Here, we show the influence of the electrostatic interaction in the absence of polarization switching by using unipolar voltage sweep. The obtained results reveal that the electromechanical neutralization between piezoresponse of polarization and electrostatic interaction plays a crucial role in the observed ferroelectric-like hysteresis loop despite the absence of polarization switching. Thus, our work can provide a basic guideline for the correct interpretation of the hysteresis loop in PFM-based studies. [ABSTRACT FROM AUTHOR]

The manipulation of local ionic behavior via external stimuli in oxide systems is of great interest because it can help in directly tuning material properties. Among external stimuli, mechanical force has attracted intriguing attention as novel stimulus for ionic modulation. Even though effectiveness of mechanical force on local ionic modulation has been validated in terms of static effect, its real-time i.e., dynamic, behavior under an application of the force is barely investigated in spite of its crucial impact on device performance such as force or pressure sensors. In this study, we explore dynamic ionic behavior modulated by mechanical force in NiO thin films using electrochemical strain microscopy (ESM). Ionically mediated ESM hysteresis loops were significantly varied under an application of mechanical force. Based on these results, we were able to investigate relative relationship between the force and voltage effects on ionic motion and, further, control effectively ionic behavior through combination of mechanical and electrical stimuli. Our results can provide comprehensive information on the effect of mechanical forces on ionic dynamics in ionic systems. [ABSTRACT FROM AUTHOR]

We explored the transfer of a single-layered graphene membrane assisted by substrate adhesion. A relatively larger adhesion force was measured on the SiO2 substrate compared with its van der Waals contribution, which is expected to result from the additional contribution of the chemical bonding force. Density functional theory calculations verified that the strong adhesion force was indeed accompanied by chemical bonding. The transfer of single-layered graphene and subsequent deposition of the dielectric layer were best performed on the SiO2 substrate exhibiting a larger adhesion force. This study suggests the selection and/or modification of the underlying substrate for proper transfer of graphene as well as other 2D materials similar to graphene. [ABSTRACT FROM AUTHOR]

Scanning probe microscopy (SPM)-based approaches have been extensively studied as methods to control the structure and properties of materials on the nanoscale. In many cases, the SPM probe is physically utilized to control structure and properties. In addition to physical modulation, it has been reported that voltage can be effectively used to modulate electrochemical phenomena on the sample surface. These studies suggest that electrochemical modulation of the structure and properties is possible by applying a voltage. Herein, in order to demonstrate voltage induced modulation of surface structure, we explored surface nanosculpting by creating electrochemically induced pits on the surface of TiO2 thin films through the application of voltage using the atomic force microscope tip. Using a unipolar negative voltage sweep, pits were successfully generated. Further, the electric potential distribution was simulated to unravel the relationship between the pit volume and the magnitude of the applied voltage. Finally, surface protrusion induced by positive voltage sweep was also observed to elucidate the complete process of electrochemically induced surface modulation. These results can offer fundamental information for understanding how surface structure can be modulated by electrochemical phenomena. [ABSTRACT FROM AUTHOR]