Search

The investigation of a simple and self-assembling method for realizing polymeric micro-bottle resonators is reported. By dispensing precise amounts of SU-8 onto a cleaved optical fiber, employed as mechanical support, bottle microcavities with different shapes and diameters are fabricated. The balancing of surface energy between glass fiber and polymeric microresonator with surface tension of SU-8 confers different shape to these microstructures. Planar single-mode SU-8 based waveguide, realized on polymethylmethacrylate, is chosen for exciting the micro-bottle resonators by evanescent wave. The reliability of the fabrication process and the shape of the bottle microcavities are investigated through optical analysis. We observe whispering gallery modes in these resonant microstructures by a robust coupling with single mode planar waveguides around 1.5 im wavelength. The resonance spectra of micro-bottle resonators and the spectral characteristics, such as Quality-factor (Q factor) and free spectral range, are evaluated for all the realized microstructures. SU-8 micro-bottle resonators show high Q-factors up to 3.8 x 104 and present a good mechanical stability. These features make these microcavities attractive for sensing and/or lasing applications in a planar platform. [ABSTRACT FROM AUTHOR]

Rare-earth-doped (Er-, Yb- and Er+Yb-doped) silica glasses have been produced and characterized. Their spectroscopic properties have been assessed and optical amplification devices have been produced therefrom and characterized. [ABSTRACT FROM AUTHOR]

Abstract: Irradiation with N+ ions of the 1.5–3.5MeV energy range was applied to optical waveguide formation. Planar and channel waveguides have been fabricated in an Er-doped tungsten–tellurite glass, and in both types of bismuth germanate (BGO) crystals: Bi4Ge3O12 (eulytine) and Bi12GeO20 (sillenite). Multi-wavelength m-line spectroscopy and spectroscopic ellipsometry were used for the characterisation of the ion beam irradiated waveguides. Planar waveguides fabricated in the Er-doped tungsten–tellurite glass using irradiation with N+ ions at 3.5MeV worked even at the 1550nm telecommunication wavelength. 3.5MeVN+ ion irradiated planar waveguides in eulytine-type BGO worked up to 1550nm and those in sillenite-type BGO worked up to 1330nm. [Copyright &y& Elsevier]

A novel all-in-fiber method for coupling light to high-Q silica whispering gallery mode (WGM) optical micro-resonators is presented, which is based on a pair of long period fiber gratings (LPGs) written in the same silica fiber, along with a thick fiber taper (15-18 μm in waist) in between the LPGs. The proposed coupling structure is robust and can be replicated many times along the same fiber simply cascading LPGs with different bands. Typical Q-factors of the order of 10(8) and total coupling efficiency up to 60% were measured collecting the resonances of microspheres or microbubbles at the fiber end. This approach uniquely allows quasi-distributed and wavelength selective addressing of different micro-resonators along the same fiber.

We report on a comprehensive theoretical and experimental analysis of the feed-forward method for external frequency stabilization of a continuous wave laser against a frequency comb. Application of the method to a distributed feedback diode laser at 1.55 μm allows line narrowing from 800 to 10 kHz, with frequency noise reduction by more than 2 decades up to a Fourier frequency of 100 kHz and a maximum control bandwidth of 0.8 MHz. The results are consistent with a relative phase fluctuation of 1.4 rad rms, as limited by uncompensated high-frequency noise of the slave laser.

Homogeneous polymeric thin layers have been used as functionalizing agents on silica microspherical resonators in view of the implementation of an immunosensor. We have characterized the microspheres functionalized with poly-L-lactic acid and Eudragit L100, as an alternative to the commonly used 3-Aminopropyltrimethoxysilane. It is shown that polymeric functionalization does not affect the high quality factor (Q greater than 10(7)) of the silica microspheres, and that the Q factor is about 3 x 10(5) after chemical activation and covalent binding of immunogammaglobulin (IgG). This functionalizing process of the microresonator constitutes a promising step towards the achievement of an ultra sensitive immunosensor., ((c) 2009 Optical Society of America)

We present the characterization of highly photorefractive Er3+/Yb3+-doped 75SiO2-25GeO2 planar waveguides, single mode at 1550 nm, deposited by radio-frequency-magnetron-sputtering (RFMS) technique. Details of the deposition process are reported. The material presents an intense absorption band (alpha approximately 10;3/10;4 cm;-1) in the UV region. Irradiations by a KrF excimer laser source at lambda = 248 nm have produced large positive (up to 310-3) refractive index changes, without the need of particular sensitization procedures. Direct measurements of UV photo-induced volume densification demonstrates that glass compaction accounts for large part of the refractive index change. Highly efficient photo-induced phase gratings have thus been fabricated in the waveguide.