Search

Research suggests that National Collegiate Athletic Association (NCAA) Division I student-athletes have higher levels of stress and other behavioral health issues, including substance use, than nonathletes. For several reasons, student-athletes [...]

An electroosmotic flow (EOF)-based pump, integrated with a sol--gel stationary phase located in the electric field-free region of a microchip, enabled the separation of six nitroaromatic and nitramine explosives and their degradation products via liquid chromatography (LC). The integrated pump and LC system were fabricated within a single quartz substrate. The pump region consisted of a straight channel (3.0 cm x 230 [micro]m x 100 [micro]m) packed with 5-[micro]m porous silica beads. The sol--gel stationary phase was derived from a precursor mixture of methyltrimethoxy-and phenethyltrimethoxysilanes and was synthesized in the downstream, field-free region of the microchip, resulting in a stationary-phase monolith with dimensions of 2.6 cm x 230 [micro]m x 100 [micro]m. Fluid dynamic design considerations are discussed, especially as they relate to integrating the EOF pump with the LC system. Pump and separation performance, as characterized by flow rate measurements, injection, elution, separation, and detection, point to a viable analytical chemistry platform that encompasses all of the benefits expected of portable, laboratory-on-chip systems, including reduced sample requirements and small packaging.

In order to understand the role of stacked micelles in sample preconcentration, it is necessary to understand the factors that contribute to the micelle stacking phenomenon. Various MEKC background electrolyte (BGE) solutions were prepared in the presence of Sudan III in order to monitor the micelle stacking phenomenon in the anionic sodium dodecyl sulfate and sodium cholate micelle systems. The data show that micelle stacking is a dynamic process that is strongly dependent upon the relative conductivities of the sample matrix and BGE, the relative column length of the sample plug, and the mobilities of the ions involved in the stacking process regardless of electric field conditions (i.e., field-amplified stacking, sweeping, or high-salt stacking). Conditions under which micelle stacking can be expected to occur are presented, and the extent of micelle stacking is quantified. The micelle stacking phenomenon is correlated to the separation performance of a series of neutral alkaloids. It is shown that neutral analytes migrate rapidly through the evolving stacked micelle region in the initial moments of the separation. As a consequence of this transient interaction, analytes with small retention factors spend less time in the stacked micelle region and experience lower stacked micelle concentrations than analytes with large retention factors that spend more time in the growing stacked micelle region. It is also demonstrated that the extent of analyte enrichment generally increases with injection length, by facilitating greater interaction time with stacked micelles; however, enrichment will eventually plateau with increasing injection length as a function of an analyte's affinity for the micelle. Finally, it is shown that, in contrast to conventional wisdom, a range of long injection plugs exist where separation efficiency can be dramatically improved due to analyte interaction with an actively growing stacked micelle region.

A microchip-based, displacement immunoassay for the sensitive laser-induced fluorescence detection of staphylococcal enterotoxin B is presented. The glass microchip device consists of a microchannel that contains a double weir structure for supporting antibody-functionalized microbeads. After a 30-min sample preparation step, the displacement assay was performed without user intervention and produced quantitative results in an additional 20 min. Linear detection responses were observed over 6 orders of magnitude and provided detection limits down to 1 fM (28.5 fg/mL). The surprisingly low detection limits are hypothesized to arise from field-based enrichment analogous to field-amplified stacking, chromatographic effects, and limited diffusion lengths in the microbead bed. The assay was challenged with bovine serum albumin, casein, and milk sample matrixes. This system has the potential to provide highly sensitive detection capabilities for target biomolecules.

The ability to detect sub-nanomolar concentrations of ricin using fluorescently tagged RNA aptamers is demonstrated. Aptamers rival the specificity of antibodies and have the power to simplify immunoassays using capillary electrophoresis. Under nonequilibrium conditions, a dissociation constant, [K.sub.d], of 134 nM has been monitored between the RNA aptamer and ricin A-chain. With use of this free-solution assay, the detection of 500 pM (~14 ng/mL) or 7.1 amol of ricin is demonstrated. The presence of interfering proteins such as bovine serum albumin and casein do not inhibit this interaction at sub-nanomolar concentrations. When spiked with RNAse A, ricin can still be detected down to 1 nM concentrations despite severe aptamer degradation. This approach offers a promising method for the rapid, selective, and sensitive detection of biowarfare agents.

An integrated microdevice was utilized for the autonomous coupling of solid-phase extraction (SPE) to micellar electrokinetic chromatography (MEKC). Porous plugs of polymethacrylate polymer (~200 [micro]m in length) were fabricated by ultraviolet irradiation in microchannels. Microcolumns of hydrophobic beads packed against the polymethacrylate plugs were utilized for the quantitative extraction of rhodamine B, yielding preconcentration factors over 200 for a 90-s extraction. The calculated detection limit for this dye was 60 fM. A sample of coumarin dyes were concentrated by SPE, eluted in a nonaqueous solvent from a separate on-chip reservoir, and injected by a gated valve onto a separate column for MEKC analysis. Using the integrated device, a completely automated sequence of extraction, elution, injection, separation, and detection were performed in less than 5 min. Observed separation efficiencies were high, with plate heights below 2 [micro]m. The analysis was at least 3 times faster than semiautomated, conventional, solid-phase extraction, while requiring no user intervention. The design, fabrication, and autonomous operation of the device is discussed.

Signal amplification using enzyme multilayers on carbon nanotube (CNT) templates is shown to yield a remarkably sensitive electrochemical detection of proteins and nucleic acids. The electrostatic layer-by-layer (LBL) self-assembly onto CNT carders maximizes the ratio of enzyme tags per binding event to offer the greatest amplification factor reported to date. Absorption spectroscopy, TEM, and electrochemical characterization confirm the formation of LBL enzyme nanostructures on individual CNT carders. The enzymatic activity is found to increase with the number of enzyme layers. The new protocol is illustrated for monitoring sandwich hybridization and antibody-antigen interactions in connection with alkaline phosphatase tracers. Factors affecting the enzyme loading and the analytical performance have been optimized. Such amplified bioelectronic assays allow detection of DNA and proteins down to 80 copies (5.4 aM) and 2000 protein molecules (67 aM), respectively. Given the enormous amplification afforded by the new CNT-LBL biolabel, such route offers great promise for ultrasensitive detection of infectious agents and disease markers.

An electrochemical immunoassay protocol for the simultaneous measurements of proteins, based on the use of different inorganic nanocrystal tracers is described. The multiprotein electrical detection capability is coupled to the amplification feature of electrochemical stripping transduction (to yield fmol detection limits) and with an efficient magnetic separation (to minimize nonspecific adsorption effects). The multianalyte electrical sandwich immunoassay involves a dual binding event, based on antibodies linked to the nanocrystal tags and magnetic beads. Carbamate linkage is used for conjugating the hydroxyl-terminated nanocrystals with the secondary antibodies. Each biorecognition event yields a distinct voltammetric peak, whose position and size reflects the identity and level, respectively, of the corresponding antigen. The concept is demonstrated for a simultaneous immunoassay of [beta.sub.2]-microglobulin, IgG, bovine serum albumin, and C-reactive protein in connection with ZnS, CdS, PbS, and CuS colloidal crystals, respectively. These nanocrystal labels exhibit similar sensitivity. Such electrochemical coding could be readily multiplexed and scaled up in multiwell microtiter plates to allow simultaneous parallel detection of numerous proteins or samples and is expected to open new opportunities for protein diagnostics and biosecurity.

A microchip protocol for the capillary electrophoresis separation and electrochemical detection of thiol-containing degradation products of V-type nerve agents is described. The microchip assay relies on the derivatization reaction of 2-(dimethylamino)ethanethiol (DMAET), 2-(diethylamino)ethanethiol (DEAET), and 2-mercaptoethanol (ME) with o-phthaldialdehyde in the presence of the amino acid valine along with amperometric monitoring of the isoindole derivatives. Both off-chip and on-chip derivatization reactions have led to highly sensitive and rapid detection of the thiol degradation products. Various parameters influencing the derivatization, separation, and detection processes were examined and optimized. These include the amino acid co-reagent, reagent-mixing ratio, reaction time, injection time, separation voltage, and detection potential. The chip microsystem offers a rapid (< 4 min) simultaneous detection of micromolar concentrations of DMAET, DEAET, and ME. Linear calibration plots were observed for the V-type nerve agent thiol degradation products, along with good stability and reproducibility (RSD < 8.0%). Detection limits of 5 and 8 [micro]M were obtained for the off-chip reaction of DMAET and DEAET, respectively, following a 2-s injection. The suitability for assays of environmental matrixes was demonstrated for the determination of DMAET and DEAET in untreated tap and river water samples. The favorable analytical performance makes the new microfluidic device attractive for addressing the needs of various security scenarios.

The continual or on-demand delivery of aerosol is important for sensor validation and the development of trace particle detection methodologies. The system presented here operates by introducing aerosolized analytical standard solutions in a heated air flow, generating vapor phase analytes that are subsequently transported and cooled to provide aerosolized particles. The notable design feature was a small concentric air flow device that blends chilled dry air with vapor phase analyte to induce a phase transition without the need for volatile organic solvents. While organic solvents accelerate solvent evaporation, they present potential interferences for downstream sensors. Cyclotrimethylenetrinitramine (RDX) particles were generated and optically counted from the exhaust plume aerosol. The solid RDX material was binned into 1–2.5, 2.5–5, 5–10, and 10+ µm diameter sizes and when the system was actively cooled, the generation of particles exhibited a relative increase of 4.9%, 27.6%, 95.6%, and 78.0% in production, respectively. When observed under a microscope, collected RDX particles ranged from about 1 to 7 µm in diameter. It was determined that the production of solid material was proportional to the temperature and mass loading of the vapor, as dictated by the feed solution concentration; cooler temperatures and higher concentrations led to the increased production of particles ranging from 1 to 10 μm in diameter for the low-vapor pressure analytes studied: RDX (cyclotrimethylenetrinitramine), PETN (pentaerythritol tetranitrate), TNT (2-methyl-1,3,5-trinitrobenzene), and 2,6-DNT (2,6-dinitrotoluene). [ABSTRACT FROM AUTHOR]

Molecular mechanisms underlying cardiac dysfunction and subsequent heart failure in diabetic cardiomyopathy are incompletely understood. Initially we intended to test the role of G protein-coupled receptor kinase 2 (GRK2), a potential mediator of cardiac dysfunction in diabetic cardiomyopathy, but found that control animals on HFD did not develop cardiomyopathy. Cardiac function was preserved in both wild-type and GRK2 knockout animals fed high-fat diet as indicated by preserved left ventricular ejection fraction (LVEF) although heart mass was increased. The absence of cardiac dysfunction led us to rigorously evaluate the utility of diet-induced obesity to model diabetic cardiomyopathy in mice. Using pure C57BL/6J animals and various diets formulated with different sources of fat-lard (32% saturated fat, 68% unsaturated fat) or hydrogenated coconut oil (95% saturated fat), we consistently observed left ventricular hypertrophy, preserved LVEF, and preserved contractility measured by invasive hemodynamics in animals fed high-fat diet. Gene expression patterns that characterize pathological hypertrophy were not induced, but a modest induction of various collagen isoforms and matrix metalloproteinases was observed in heart with high-fat diet feeding. PPARa-target genes that enhance lipid utilization such as Pdk4, CD36, AcadL, and Cpt1b were induced, but mitochondrial energetics was not impaired. These results suggest that although long-term fat feeding in mice induces cardiac hypertrophy and increases cardiac fatty acid metabolism, it may not be sufficient to activate pathological hypertrophic mechanisms that impair cardiac function or induce cardiac fibrosis. Thus, additional factors that are currently not understood may contribute to the cardiac abnormalities previously reported by many groups. [ABSTRACT FROM AUTHOR]

The transport efficiency of 2,4-dinitrotoluene (2,4-DNT), 2,4,6-trinitrotoluene (TNT) and 1,3,5-trinitro-1,3,5-triazinane (RDX) trace vapors through tubing materials that commonly constitute vapor handling infrastructures have been determined for a variety of tubing dimensions and sampling conditions. Using a programmable temperature vaporization inlet coupled with a gas chromatography mass spectrometer (PTV-GC-MS), the explosive vapors were quantified both with and without a length of tubing of a specific material in the sampling flow path. At vapor temperatures of 30 °C and 66 °C, minimal attenuations were observed for 2,4-DNT and TNT vapor concentrations when the tubing material was in-line with the sampling flow path, indicating that the transport is largely unaffected by interactions with the surface of the tubing materials. In contrast, RDX vapors showed large attenuations as a function of both sampling conditions and tubing materials/dimensions. For those experiments where attenuated RDX vapor transport was observed, the mass sequestered by interactions between the flowing vapor and the internal tubing surface was determined to be in the range of tens to hundreds of picograms. Of all the materials examined for RDX transport, fluorinated ethylene propylene (FEP) tubing resulted in the least amount of mass loss to surface interactions, with vapor transport efficiencies (VTEs) between 95–100%. However, for some materials, the combination of tubing dimensions and sampling conditions resulted in no RDX transport, even after sampling more than 250.0 L of vapor through the tubing. [ABSTRACT FROM AUTHOR]

The Trace Vapor Generator for Explosives and Narcotics (TV-Gen) is a portable and compact instrument designed to deliver a continuous source of trace-level vapors and vapor mixtures. It provides a tool to assist in the independent validation and verification of new materials and sensors under development for the vapor detection of explosives and narcotics. The design was conceived for use with a broad range of analytes, detection systems, materials, and sensors and to switch easily between the clean and analyte vapor streams. The TV-Gen system utilizes nebulization of aqueous analyte solutions, an oven to promote efficient transport, and a control box that provides dedicated computer control with logging capabilities. Resultant vapor streams are stable over several hours, with the vapor concentration controlled by a combination of aqueous analyte solution concentration, liquid flow rate through the nebulizer, and volume flow rate of air through the TV-Gen manifold. [ABSTRACT FROM AUTHOR]

A study presents the use of quantum-dot (QD) semiconductor nanocrystal tracers for designing multi-analyte electrochemical aptamer biosensors with subpicomolar, attomole detection limits. The coupling of aptamers with the coding and amplification features of inorganic nanocrystals offers a highly sensitive and selective simultaneous bioelectronic detection of several protein targets.