Search

Optical coherence tomography angiography (OCTA) can provide rapid, volumetric, and noninvasive imaging of tissue microvasculature without the requirement of exogenous contrast agents. To investigate how A-scan rate and interscan time affected the contrast and dynamic range of OCTA, we developed a 1.06-µm swept-source OCT system enabling 100-kHz or 200-kHz OCT using two light sources. After system settings were carefully adjusted, almost the same detection sensitivity was achieved between the 100-kHz and 200-kHz modalities. OCTA of ear skin was performed on five mice. We used the variable interscan time analysis algorithm (VISTA) and the designated scanning protocol with OCTA images reconstructed through the correlation mapping method. With a relatively long interscan time (e.g., 12.5 ms vs. 6.25 ms for 200-kHz OCT), OCTA can identify more intricate microvascular networks. OCTA image sets with the same interscan time (e.g., 12.5 ms) were compared. OCTA images acquired with a 100-kHz A-scan rate showed finer microvasculature than did other imaging modalities. We performed quantitative analysis on the contrast from OCTA images reconstructed with different A-scan rates and interscan time intervals in terms of vessel area, total vessel length, and junction density.

Fourier-domain optical coherence tomography (FD-OCT), including spectral-domain OCT (SD-OCT) and swept-source OCT (SS-OCT), allows the volumetric imaging of the tissue architecture with a faster speed and higher detection sensitivity than does time-domain OCT. Although the hardware implementations of SD-OCT and SS-OCT are different, these technologies share very similar signal processing steps for image reconstruction. In this study, we developed hardware implementations and software architectures to design a generic framework for FD-OCT. For SD-OCT systems, an external synchronization approach was used to realize a data acquisition schematic similar to that used in SS-OCT by carefully managing the timing clocks in the detection unit and for the waveform generation. In addition, by utilizing modules and factory concepts, a software engine can be developed that supports various acquisition devices and software operations or image processing functions with high operation flexibility while maintaining its robustness. Data processing and data saving were optimized using the parallel computing method with the OpenMP library and by leveraging the parallelism within the acquired data, respectively.