Search

A novel micro saw was fabricated using a combination of photolithography and electroplating techniques, resembling a miniature timing belt with sideways blades. The rotation or oscillation direction of the micro saw is designed to be perpendicular to the cutting direction so that transverse cutting of the bone is attainable to extract a preoperatively planned bone-cartilage donor for osteochondral auto-graft transplantation. The mechanical property of the fabricated micro saw obtained using the nanoindentation test shows that the mechanical properties of the micro saw are almost an order of magnitude higher than bone, which indicates its potential bone-cutting application. To demonstrate the cutting capability of the fabricated micro saw, an in vitro animal bone cutting was performed using a custom test rig consisting of a microcontroller, 3D printer, and other readily available parts. [ABSTRACT FROM AUTHOR]

A facile and digital do‐it‐yourself technique is proposed to fabricate inexpensive sensors on flexible substrates (paper, cloth, and plastic film). A set of office‐grade equipment (i.e., laserjet printer, thermal laminator, computer‐aided paper cutter), and commercially available supplies (i.e., baking wax paper, furniture restoration metal‐leaf) are used. Forming electrodes through traditional printing and defining a fluidic confinement region through crafting practice enable fabrication of a wide range of devices without requiring customized specialty instruments, costly infrastructure, and complicated fabrication steps, unlike previously introduced methods. Three different levels of experiments are designed to assess the comprehensiveness and responsiveness of the proposed method to the needs of existing research fields. The performances of the fabricated features at each level are evaluated to cover various application domains in environmental monitoring and biomedical diagnostics utilizing conductometric, colorimetric, biochemical, and chemoresistive detection principles. Devices with varying size of features, from nanometers to centimeters, are fabricated and characterized. This method provides an alternative route to decentralized production of low‐cost flexible sensors and other devices, with a minimal step, time, and facilities. The operation of such devices is simple and can be further empowered by smartphones for data analysis and transmission. [ABSTRACT FROM AUTHOR]

Graphene known for its superb physical properties, such as high transparency and thermal conductivity, is proposed as a solution to the problem of thermal management of the electronic devices, requiring transparency and cooling. It is shown that graphene heat spreader layer drives the heat out of the device more efficiently as compared with the commercially used metal thin films for integrated circuit cooling. An application of graphene heat spreader is proposed and tested in chip-on-film packaging. Graphene performance is compared with a gold layer with a similar transparency experimentally and theoretically as a proof of the efficient thermal management capability of graphene. [ABSTRACT FROM AUTHOR]

A layer of self-assembled 1-octadecanethiol was used to fabricate a palladium (Pd)/zinc oxide (ZnO) nanoparticle-based flexible hydrogen sensor with enhanced response and high selectivity at room temperature. A palladium film was first deposited using DC sputtering technique and later annealed to form palladium nanoparticles. The formation of uniform, surfactant-free palladium nanoparticles contributed to improved sensor response towards hydrogen gas at room temperature. The obtained sensor response was higher than for previously reported room temperature Pd/ZnO sensors. Furthermore, the use of the polymer membrane suppressed the sensor's response to methane, moisture, ethanol, and acetone, resulting in the selective detection of hydrogen in the presence of the common interfering species. This study shows a viable low-cost fabrication pathway for highly selective room temperature flexible hydrogen sensors for hydrogen-powered vehicles and other clean energy applications. [ABSTRACT FROM AUTHOR]

Flexible sensors with low fabrication cost, high sensitivity, and good stability are essential for the development of smart devices for wearable electronics, soft robotics, and electronic skins. Herein, we report a nanocomposite material based on carbon nanotube and metal oxide semiconductor for ultraviolet (UV) sensing applications, and its sensing behavior. The sensors were prepared by a screen-printing process under a low-temperature curing condition. The formation of a conducting string node and a sensing node could enhance a UV sensing response, which could be attributed to the uniform mixing of functionalized multi-walled carbon nanotubes and zinc oxide nanoparticles. A fabricated device has shown a fast response time of 1.2 s and a high recovery time of 0.8 s with good mechanical stability. [ABSTRACT FROM AUTHOR]

Taxis has been reported in many cells and microorganisms, due to their tendency to migrate toward favorable physical situations and avoid damage and death. Thermotaxis and chemotaxis are two of the major types of taxis that naturally occur on a daily basis. Understanding the details of the thermo- and chemotactic behavioral response of cells and microorganisms is necessary to reveal the body function, diagnosing diseases and developing therapeutic treatments. Considering the length-scale and range of effectiveness of these phenomena, advances in microfluidics have facilitated taxis experiments and enhanced the precision of controlling and capturing microscale samples. Microfabrication of fluidic chips could bridge the gap between in vitro and in situ biological assays, specifically in taxis experiments. Numerous efforts have been made to develop, fabricate and implement novel microchips to conduct taxis experiments and increase the accuracy of the results. The concepts originated from thermo- and chemotaxis, inspired novel ideas applicable to microfluidics as well, more specifically, thermocapillarity and chemocapillarity (or solutocapillarity) for the manipulation of single- and multi-phase fluid flows in microscale and fluidic control elements such as valves, pumps, mixers, traps, etc. This paper starts with a brief biological overview of the concept of thermo- and chemotaxis followed by the most recent developments in microchips used for thermo- and chemotaxis experiments. The last section of this review focuses on the microfluidic devices inspired by the concept of thermo- and chemotaxis. Various microfluidic devices that have either been used for, or inspired by thermo- and chemotaxis are reviewed categorically. [ABSTRACT FROM AUTHOR]

A layer of self-assembled 1-octadecanethiol was used to fabricate a palladium (Pd)/zinc oxide (ZnO) nanoparticle-based flexible hydrogen sensor with enhanced response and high selectivity at room temperature. A palladium film was first deposited using DC sputtering technique and later annealed to form palladium nanoparticles. The formation of uniform, surfactant-free palladium nanoparticles contributed to improved sensor response towards hydrogen gas at room temperature. The obtained sensor response was higher than for previously reported room temperature Pd/ZnO sensors. Furthermore, the use of the polymer membrane suppressed the sensor's response to methane, moisture, ethanol, and acetone, resulting in the selective detection of hydrogen in the presence of the common interfering species. This study shows a viable low-cost fabrication pathway for highly selective room temperature flexible hydrogen sensors for hydrogen-powered vehicles and other clean energy applications.

This paper reviews the past and recent studies on thermocapillarity in relation to microfluidics. The role of thermocapillarity as the change of surface tension due to temperature gradient in developing Marangoni flow in liquid films and conclusively bubble and drop actuation is discussed. The thermocapillary-driven mass transfer (the so-called Benard-Marangoni effect) can be observed in liquid films, reservoirs, bubbles and droplets that are subject to the temperature gradient. Since the contribution of a surface tension-driven flow becomes more prominent when the scale becomes smaller as compared to a pressure-driven flow, microfluidic applications based on thermocapillary effect are gaining attentions recently. The effect of thermocapillarity on the flow pattern inside liquid films is the initial focus of this review. Analysis of the relation between evaporation and thermocapillary instability approves the effect of Marangoni flow on flow field inside the drop and its evaporation rate. The effect of thermocapillary on producing Marangoni flow inside drops and liquid films, leads to actuation of drops and bubbles due to the drag at the interface, mass conservation, and also gravity and buoyancy in vertical motion. This motion can happen inside microchannels with a closed multiphase medium, on the solid substrate as in solid/liquid interaction, or on top of a carrier liquid film in open microfluidic systems. Various thermocapillary-based microfluidic devices have been proposed and developed for different purposes such as actuation, sensing, trapping, sorting, mixing, chemical reaction, and biological assays throughout the years. A list of the thermocapillary based microfluidic devices along with their characteristics, configurations, limitations, and improvements are presented in this review.

The alloy nanowires are more prospective magnetic and shape memory materials. Fabrication of binary or more alloy nanowires using electrochemical deposition process is generally challenging due to the different synthesis conditions of individual elements. In the present work, binary NiCo alloy nanowire arrays have been fabricated by electrochemical deposition using anodic aluminum oxide template medium technique. The optimum conditions (temperature, voltage and time) for synthesis of NiCo alloy nanowire array were achieved based on the ideal experimental conditions of single Ni and Co nanowire arrays. The synthesized NiCo alloy nanowire arrays were characterized by X-ray diffraction, field emission scanning electron microscopy and energy dispersive X-ray spectrometer. The amorphous NiCo alloy nanowires were crystallized by annealing of 800 degrees C for 1 hour in argon atmosphere. The controlled composition of electrolyte provided to achieve a uniformly distributed chemical composition of Ni and Co (49.26:50.74) in nanowires.

A Laplace pressure gradient between a droplet and a liquid meniscus was utilized to create an on-demand constant flow rate capillary pump. Electrowetting on dielectric was implemented to induce the pressure gradient in the microchannel. For an initial droplet volume of 0.3 μL and a power of 12 nW a constant flow rate of 0.02 μL s(-1) was demonstrated. The effects of the wetting line energy on the static contact angle and the wetting line velocity on the dynamic contact angle in the pump operation were studied. Sample loading on-demand could be achieved by regulating an electric potential.