Search

Antibiotic abuse, particularly the excessive use of tetracycline (TC), a drug with significant environmental risk, has gravely harmed natural water bodies and even posed danger to human health. In this study, a three-dimensional self-supported MoS2/MXene nanohybrid with an expanded layer spacing was synthesized via a facile one-step hydrothermal method and used to activate peroxydisulfate (PDS) for the complete degradation of TC. The results showed that a stronger •OH signal was detected in the aqueous solution containing MoS2/MXene, demonstrating a superior PDS activation effect compared to MoS2 or Ti3C2TX MXene alone. Under the conditions of a catalyst dosage of 0.4 g/L, a PDS concentration of 0.4 mM, and pH = 5.0, the MoS2/MXene/PDS system was able to fully eliminate TC within one hour, which was probably due to the presence of several reactive oxygen species (ROS) (•OH, SO4•−, and O2•−) in the system. The high TC degradation efficiency could be maintained under the influence of various interfering ions and after five cycles, indicating that MoS2/MXene has good anti-interference and reusability performance. Furthermore, the possible degradation pathways were proposed by combining liquid chromatography–mass spectrometry (LC-MS) data and other findings, and the mechanism of the MoS2/MXene/PDS system on the degradation process of TC was elucidated by deducing the possible mechanism of ROS generation in the reaction process. All of these findings suggest that the MoS2/MXene composite catalyst has strong antibiotic removal capabilities with a wide range of application prospects. [ABSTRACT FROM AUTHOR]

Transition metals and their oxide compounds exhibit excellent chemical reactivity; however, their easy agglomeration and high cost limit their catalysis applications. In this study, an interpolation structure of a Myriophyllum verticillatum L. biochar-supported Mn/Mg composite (Mn/Mg@MV) was prepared to degrade triphenyl phosphate (TPhP) from wastewater through the activating periodate (PI) process. Interestingly, the Mn/Mg@MV composite showed strong radical self-producing capacities. The Mn/Mg@MV system degraded 93.34% TPhP (pH 5, 10 μM) within 150 min. The experimental results confirmed that the predominant role of IO3· and the auxiliary ·OH jointly contributed to the TPhP degradation. In addition, the TPhP pollutants were degraded to various intermediates and subsequent Mg mineral phase mineralization via mechanisms like interfacial processes and radical oxidation. DFT theoretical calculations further indicated that the synergy between Mn and Mg induced the charge transfer of the carbon-based surface, leading to the formation of an ·OH radical-enriched surface and enhancing the multivariate interface process of ·OH, IO3, and Mn(VII) to TPhP degradation, resulting in the further formation of Mg PO4 mineralization. [ABSTRACT FROM AUTHOR]

Microwave-absorbing materials have attracted extensive attention due to the development of electronic countermeasures. In this study, novel nanocomposites with core–shell structures based on the core of Fe-Co nanocrystals and the shell of furan methylamine (FMA)-modified anthracite coal (Coal-F) were designed and fabricated. The Diels-Alder (D-A) reaction of Coal-F with FMA creates a large amount of aromatic lamellar structure. After the high-temperature treatment, the modified anthracite with a high degree of graphitization showed an excellent dielectric loss, and the addition of Fe and Co effectively enhanced the magnetic loss of the obtained nanocomposites. In addition, the obtained micro-morphologies proved the core–shell structure, which plays a significant role in strengthening the interface polarization. As a result, the combined effect of the multiple loss mechanism promoted a remarkable improvement in the absorption of incident electromagnetic waves. The carbonization temperatures were specifically studied through a setting control experiment, and 1200 °C was proved to be the optimum parameter to obtain the best dielectric loss and magnetic loss of the sample. The detecting results show that the 10 wt.% CFC-1200/paraffin wax sample with a thickness of 5 mm achieves a minimum reflection loss of −41.6 dB at a frequency of 6.25 GHz, indicating an excellent microwave absorption performance. [ABSTRACT FROM AUTHOR]

Herein, we first design a model of reversible redox‐switching metal–organic framework single‐unit‐cell sheets, where the abundant metal single sites benefit for highly selective CO2 reduction, while the reversible redox‐switching metal sites can effectively activate CO2 molecules. Taking the synthetic Cu‐MOF single‐unit‐cell sheets as an example, synchrotron‐radiation quasi in situ X‐ray photoelectron spectra unravel the reversible switching CuII/CuI single sites initially accept photoexcited electrons and then donate them to CO2 molecules, which favors the rate‐liming activation into CO2δ−, verified by in situ FTIR spectra and Gibbs free energy calculations. As an outcome, Cu‐MOF single‐unit‐cell sheets achieve near 100 % selectivity for CO2 photoreduction to CO with a high rate of 860 μmol g−1 h−1 without any sacrifice reagent or photosensitizer, where both the activity and selectivity outperform previously reported photocatalysts evaluated under similar conditions. [ABSTRACT FROM AUTHOR]

The chemical conversion of CO2 to long‐chain chemicals is considered as a highly attractive method to produce value‐added organics, while the underlying reaction mechanism remains unclear. By constructing surface vacancy‐cluster‐mediated solid frustrated Lewis pairs (FLPs), the 100 % atom‐economical, efficient chemical conversion of CO2 to dimethyl carbonate (DMC) was realized. By taking CeO2 as a model system, we illustrate that FLP sites can efficiently accelerate the coupling and conversion of key intermediates. As demonstrated, CeO2 with rich FLP sites shows improved reaction activity and achieves a high yield of DMC up to 15.3 mmol g−1. In addition, by means of synchrotron radiation in situ diffuse reflectance infrared Fourier‐transform spectroscopy, combined with density functional theory calculations, the reaction mechanism on the FLP site was investigated systematically and in‐depth, providing pioneering insights into the underlying pathway for CO2 chemical conversion to long‐chain chemicals. [ABSTRACT FROM AUTHOR]

Objectives. Conventional approaches for patients with nonerosive gastroesophageal reflux disease (NERD) were not satisfactory. This study aimed to evaluate the effectiveness and mechanisms of Chinese herbal medicine Hewei Jiangni Decoction (HWJND) as a novel and promising regimen for NERD. Methods. A total of 128 patients with NERD were randomly assigned to the Treatment group and Control group. The patients from the Treatment group were administered HWJND (81 g) plus dummy omeprazole (20 mg) daily for 8 weeks, and the others were given dummy HWJND granules (81 g) plus omeprazole (20 mg). The clinical efficacy was assessed using the gastroesophageal reflux disease questionnaire (GERD-Q) scale, patient reported outcomes (PRO) scale, and short form health survey 36 (SF-36) scale at week 4. Moreover, its pharmacological and molecular mechanisms were elucidated based on network pharmacology and molecular docking. Results. Due to case shedding and other reasons, 109 patients, including 56 in the Treatment group and 53 in the Control group completed this study. Our results showed that HWJND significantly improved heartburn, regurgitation, epigastric pain, nausea, and sleep disturbance, which led to a significant reduction of GERD-Q scores in NERD patients. In addition, PRO scores of NERD patients with HWJND administration were improved, and sufficient relief of physical role, body pain, general health, social function, and mental health on the SF-36 scale was also observed in patients after HWJND treatment. We further showed that the curative effect of HWJND was close to that of omeprazole, except for the better improvement of general health and social function. What's more, the main active ingredients of HWJND included quercetin, beta-sitosterol, naringenin, baicalein, and kaempferol were retrieved, and the protective effects of HWJND against NERD may be closely related to targets such as TNF, IL6, IL1B, MMP9, CXCL8, and EGFR, which were mainly enriched in IL-17 signaling pathway and TNF signaling pathway. Conclusion. Our findings demonstrate that HWJND is noninferior to oral omeprazole for the treatment of patients with NERD, plays a therapeutic role through multiple targets and diverse pathways, and holds promise for complementary and alternative therapy for the treatment of NERD. This trial is registered with http://www.chictr.org.cn, Chinese Clinical Trials Registry [ChiCTR2200055960]. [ABSTRACT FROM AUTHOR]

Highlights: nZVI/MXene@CNTs with a three-dimensional intercalation structure was successfully synthesized. nZVI/MXene@CNTs exhibited a high adsorption and catalytic oxidation capacity for As(III). nZVI/MXene@CNTs showed good anti-interference ability. nZVI/MXene@CNTs possessed excellent recyclability and reusability. Transition metal compounds demonstrated good performance in the removal of environmentally harmful contaminants, such as arsenic, while the aggregation propensity and poor chemical stability should be noticed. In this study, the nZVI/MXene@CNTs was adequately prepared by liquid reduction precipitation method for adsorption and oxidation of As(III) from the aqueous solution. The results of batch removal experiments showed that the maximum removal capacity of the nZVI/MXene@CNTs for As(III) was 443.32 mg/g with the pH = 3.0 at 25 °C. The effects of initial pH, dosage of materials and ionic strength on As(III) removal were explored. According to the various characterization analyses, the most plausible mechanisms of As(III) removal were the surface complexation, solid phase precipitation and the catalytic oxidation by the •OH. Furthermore, the nZVI/MXene@CNTs could be readily activated and reused via leaching with 0.1 M NaOH solution, due to the three-dimensional mesh intercalation structure. Therefore, it is a potential nanocomplex for removing and recovering As(III) from water with excellent capacity and environmental friendliness. [ABSTRACT FROM AUTHOR]

Abstract Background Lignin materials are abundant and among the most important potential sources for biofuel production. Development of an efficient lignin degradation process has considerable potential for the production of a variety of chemicals, including bioethanol. However, lignin degradation using current methods is inefficient. Given their immense environmental adaptability and biochemical versatility, bacterial could be used as a valuable tool for the rapid degradation of lignin. Kraft lignin (KL) is a polymer by-product of the pulp and paper industry resulting from alkaline sulfide treatment of lignocellulose, and it has been widely used for lignin-related studies. Results Beta-proteobacterium Cupriavidus basilensis B-8 isolated from erosive bamboo slips displayed substantial KL degradation capability. With initial concentrations of 0.5–6 g L-1, at least 31.3% KL could be degraded in 7 days. The maximum degradation rate was 44.4% at the initial concentration of 2 g L-1. The optimum pH and temperature for KL degradation were 7.0 and 30°C, respectively. Manganese peroxidase (MnP) and laccase (Lac) demonstrated their greatest level of activity, 1685.3 U L-1 and 815.6 U L-1, at the third and fourth days, respectively. Many small molecule intermediates were formed during the process of KL degradation, as determined using GC-MS analysis. In order to perform metabolic reconstruction of lignin degradation in this bacterium, a draft genome sequence for C. basilensis B-8 was generated. Genomic analysis focused on the catabolic potential of this bacterium against several lignin-derived compounds. These analyses together with sequence comparisons predicted the existence of three major metabolic pathways: β-ketoadipate, phenol degradation, and gentisate pathways. Conclusion These results confirmed the capability of C. basilensis B-8 to promote KL degradation. Whole genomic sequencing and systematic analysis of the C. basilensis B-8 genome identified degradation steps and intermediates from this bacterial-mediated KL degradation method. Our findings provide a theoretical basis for research into the mechanisms of lignin degradation as well as a practical basis for biofuel production using lignin materials.

Di-n-octyl phthalate (DOP), a plasticizer used in many different industrial products, is a frequently observed pollutant in the environment. Biodegradation by microorganisms is considered to be a realistic choice for the remediation of DOP contamination. In the present research, the halotolerant bacterial consortium (LF) enriched in our previous research was used to degrade DOP. It was found that the optimal conditions for LF to degrade DOP was temperature 30oC, pH 6.0, inoculum size >5%, and salt content <3%. LF could degrade a high concentration of DOP (2000 mg/L) with the removal efficiency of 96.33%. Substrate inhibition analyses indicated that the inhibition constant, maximum specific degradation rate and half-saturation constant were 2544.6 mg/L, 0.7 d−1 and 59.1 mg/L, respectively. Based on the analysis of the gas chromatography-mass spectrometry (GC-MS), the biodegradation pathway for DOP by LF was proposed. Furthermore, LF could degrade DOP in soil (100 mg/kg) with the highest removal efficiency of 89.3%. This study is the first report on DOP biodegradation by bacterial consortium. These results suggest that LF can be used to remediate DOP-contaminated environment. [ABSTRACT FROM AUTHOR]

Herein, we first design a fast low‐pressure ultraviolet light irradiation strategy for easily regenerating the nearly equivalent surface vacancies. Taking the defective Bi2O2CO3 nanosheets as an example, nearly equal amount of oxygen vacancies can be regenerated under UV light irradiation. Synchrotron‐radiation quasi in situ X‐ray photoelectron spectra disclose the Bi sites in the O‐defective Bi2O2CO3 nanosheets can act as the highly active sites, which not only help to activate CO2 molecules, but also contribute to stabilizing the rate‐limiting COOH* intermediate. Also, in situ Fourier transform infrared spectroscopy and in situ mass spectrometry unravel the UV light irradiation contributes to accelerating CO desorption process. As a result, the O‐defective Bi2O2CO3 nanosheets achieve a stability up to 2640 h over 110 cycling tests and a high evolution rate of 275 μmol g−1 h−1 for visible‐light‐driven CO2 reduction to CO. [ABSTRACT FROM AUTHOR]

Ovarian aging leads to reproductive and endocrine dysfunction, causing the disorder of multiple organs in the body and even declined quality of offspring's health. However, few studies have investigated the changes in gene expression profile in the ovarian aging process. Here, we applied integrated bioinformatics to screen, identify, and validate the critical pathogenic genes involved in ovarian aging and uncover potential molecular mechanisms. The expression profiles of GSE84078 were downloaded from the Gene Expression Omnibus (GEO) database, which included the data from ovarian samples of 10 normal C57BL/6 mice, including old (21–22 months old, ovarian failure period) and young (5–6 months old, reproductive bloom period) ovaries. First, we filtered 931 differentially expressed genes (DEGs), including 876 upregulated and 55 downregulated genes through comparison between ovarian expression data from old and young mice. Functional enrichment analysis showed that biological functions of DEGs were primarily immune response regulation, cell–cell adhesion, and phagosome pathway. The most closely related genes among DEGs (Tyrobp , Rac2 , Cd14 , Zap70 , Lcp2 , Itgb2 , H2-Ab1 , and Fcer1g) were identified by constructing a protein–protein interaction (PPI) network and consequently verified using mRNA and protein quantitative detection. Finally, the immune cell infiltration in the ovarian aging process was also evaluated by applying CIBERSORT, and a correlation analysis between hub genes and immune cell type was also performed. The results suggested that plasma cells and naïve CD4+ T cells may participate in ovarian aging. The hub genes were positively correlated with memory B cells, plasma cells, M1 macrophages, Th17 cells, and immature dendritic cells. In conclusion, this study indicates that screening for DEGs and pathways in ovarian aging using bioinformatic analysis could provide potential clues for researchers to unveil the molecular mechanism underlying ovarian aging. These results could be of clinical significance and provide effective molecular targets for the treatment of ovarian aging. [ABSTRACT FROM AUTHOR]

Copyright of Canadian Journal of Microbiology is the property of Canadian Science Publishing and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

This article provides an overview of key features pertaining to CSI reporting and beam management for the 5G New Radio (NR) currently being standardized in 3GPP. For CSI reporting, the modular design framework and high-resolution spatial information feedback offer not only flexibility in a host of use cases and deployment scenarios, but also improved average user throughput over state-of-the-art 4G LTE. To accommodate cellular communications in the milimeter-wave regime where a combination of analog and digital beamforming is typically used at both a base station and user equipment, beam management procedures such as measurement, reporting, and recovery are introduced. The utility and joint usage of these two features are demonstrated along with some potential upgrades for the next phase of 5G NR. Introduction [ABSTRACT FROM AUTHOR]

A 6 weeks pot culture experiment was carried out to investigate the stabilization effects of a modified biochar (BCM) on metals in contaminated soil and the uptake of these metals by wheat seedlings. The results showed that the application of BCM significantly increased the soil fertility, the biomass of wheat seedling roots increased by more than 50%, and soil dehydrogenase (DHA) and catalase (CAT) activities increased by 369.23% and 12.61%, respectively. In addition, with the application of BCM, the diethylenetriaminepentaacetic acid extractable (DTPA-extractable) Cd, Pb, Cu and Zn in soil were reduced from 2.34 to 0.38 mg/kg, from 49.27 to 25.65 mg/kg, from 3.55 mg/kg to below the detection limit and from 4.05 to 3.55 mg/kg, respectively. Correspondingly, the uptake of these metals in wheat roots and shoots decreased by 62.43% and 79.83% for Cd, 73.21% and 66.32% for Pb, 57.98% and 68.92% for Cu, and 40.42% and 43.66% for Zn. Furthermore, BCM application decreased the abundance and alpha diversity of soil bacteria and changed the soil bacterial community structure dramatically. Overall, BCM has great potential for the remediation of metal-contaminated soils, but its long-term impact on soil metals and biota need further research. [Display omitted] • Modified biochar (BCM) significantly reduced activity of metals in the soil. • BCM inhibited the uptake of metals by wheat seedlings. • BCM improved soil properties and increased soil enzyme activity. • BCM decreased soil bacterial diversity and changed the soil bacterial community. [ABSTRACT FROM AUTHOR]

Layer-structured graphene oxide excellent carrier for modifications; however, its poor recoverability and stability preclude its application in wastewater treatment fields. Herein, three-dimensional magnetic fungal hyphal/graphene oxide nanofibers (MFHGs) were assembled by a reductive self-assembly (RSA) strategy for the efficient capture of Co(II) and Ni(II) from high-salinity aqueous solution. The RSA strategy is inexpensive, eco-friendly and easy to scale up. The obtained MFHGs enhanced the dispersity and stability of graphene oxide and exhibited excellent magnetization and large coercivity, leading to satisfactory solid-liquid separation performance and denser sediment. The results of batch removal experiments showed that the maximum removal capacity of MFHGs for Ni(II) and Co(II) was 97.44 and 104.34 mg/g, respectively, in 2 g/L Na 2 SO 4 aqueous solution with a pH of 6.0 at 323 K, and the effects of initial pH and ionic strength on Co(II) and Ni(II) removal were explored. Yield residue analysis indicated that the high porosity and oxygen-containing functional groups of MFHGs remarkably improved their Co(II)- and Ni(II)-removal capacities. According to the analysis, hydroxyl groups and amine groups participated in the chemical reaction of Co(II) and Ni(II) removal, and cation-exchange chemical adsorption was dominant during the Co(II)- and Ni(II)-removal process. Based on the attributes of MFHGs, a continuous-flow recycle reactor (CFRR) was proposed for emergency aqueous solution treatment and exhibited satisfactory removal efficiency and regeneration performance. The combination of MFHGs and the proposed CFRR is a promising water treatment strategy for rapid treatment applications. Unlabelled Image • The adsorbent (MFHGs) exhibited a high capture capacity for Co(II) and Ni(II). • MFHGs exhibited fast separation performance and denser sediment. • MFHGs enhanced the stability and reusability of graphene oxide nanosheets. • A reactor (CFRR) was designed for Co and Ni recovery from high-salinity aqueous solution. • CFRR presented a satisfactory removal efficiency and regeneration performance. [ABSTRACT FROM AUTHOR]

Heavy metal contamination in soil has attracted great attention worldwide. In situ stabilization has been considered an effective way to remediate soils contaminated by heavy metals. In the present research, a multiple-modified biochar (BCM) was prepared to stabilize Cd and Cu contamination in two different soils: a farmland soil (JYS) and a vegetable soil (ZZS). The results showed that BCM was a porous-like flake material and that modification increased its specific surface area and surface functional groups. The incubation experiment indicated that BCM decreased diethylenetriaminepentaacetic (DTPA)-extractable Cd and Cu by 92.02% and 100.00% for JYS and 90.27% and 100.00% for ZZS, respectively. The toxicity characteristic leaching procedure (TCLP)-extractable Cd and Cu decreased 66.46% and 100.00% for JYS and 46.33% and 100.00% for ZZS, respectively. BCM also reduced the mobility of Cd and Cu in soil and transformed them to more stable fractions. In addition, the application of BCM significantly increased the soil dehydrogenase, organic matter content and available K (p < 0.05). These results indicate that BCM has great potential in the remediation of Cd- and Cu-contaminated soil. Image 1 • Multiple modifications improved the specific surface area and surface active groups of biochar. • BCM efficiently reduced the bioavailability Cd and Cu. • BCM reduced the leachability of Cd and Cu. • BCM transformed Cd and Cu to a more stable fraction. • BCM improved the properties of Cd- and Cu-contaminated soils. [ABSTRACT FROM AUTHOR]

Water pollution has caused the ecosystem to be in a state of imbalance for a long time. It has become a major global ecological and environmental problem today. Solving the potential hidden dangers of pollutants and avoiding unauthorized access to resources has become the necessary condition and important task to ensure the sustainable development of human society. To solve such problems, this review summarizes the research progress of nanomaterials in the field of water aimed at the treatment of water pollution and the development and utilization of new energy. The paper also tries to seek scientific solutions to environmental degradation and to create better living environmental conditions from previously published cutting edge research. The main content in this review article includes four parts: advanced oxidation, catalytic adsorption, hydrogen, and oxygen production. Among a host of other things, this paper also summarizes the various ways by which composite nanomaterials have been combined for enhancing catalytic efficiency, reducing energy consumption, recycling, and ability to expand their scope of application. Hence, this paper provides a clear roadmap on the status, success, problems, and the way forward for future studies. [ABSTRACT FROM AUTHOR]

A constructed wetland system, consisting of a surface-flow wetland cell connected in series with three vertical subsurface-flow wetland cells, was tested for treatment of domestic sewage from rural families in southern China. Diatomite, vermiculate, zeolite and hydrotalcite, were used, respectively, as filler adsorbents in the sequenced subsurface-flow cells for adsorption of organic, cationic and anionic pollutants. Selected trees, shrubs and annual herbs were planted to form a wetland plant community. The total treatment capacity, hydraulic loading rate and water retention time were 2 m3/d, 0.5 m/d and 48 h, respectively. Experimental data obtained from a year operation confirmed that the treatment process followed the dynamic pathway of pollutant transformation. The constructed system was effective to remove TSS, CODCr and BOD5 and their effluent concentrations met the first grade of the discharge standards legislated in China. The removal rates of TN, NH3-N and TP were relatively lower, and their effluent concentrations fell within the range between the first and second grade of the standards. An increase in initial pollutant loading and a decrease in temperature in winter caused apparent accumulation of TN, NH3-N and TP in the system. Discharge of sludge at adequate intervals was shown to be effective to enhance the treatment efficiency. [ABSTRACT FROM AUTHOR]

Single-user multi-antenna technologies are well upported in current standard specifications like LTE Release 8/9. Further development of the specification (LTE-Advanced) is expected to conform to the requirements for IMT-Advanced systems. One of the key enabling features of LTE-Advanced to meet IMT-Advanced downlink performance requirements is multi-user MIMO, where a transmitter serves multiple users simultaneously on the same frequency resource, primarily relying on spatial separation. In general, multi-user MIMO is beneficial for improving average user spectral efficiency. However, cell edge user spectral efficiency may be reduced if multi-user MIMO is used exclusively, due to residual inter-user interference arising from practical multi-user beamforming and reduced transmit power allocated to each user. Therefore, it should be possible to configure the UE-specific transmission mode to support dynamic switching between single-user MIMO and multi-user MIMO to balance the cell edge user spectral efficiency as well as the average cell user spectral efficiency. In this article, we study various aspects of multi-user MIMO including design philosophy, multi-user precoding, and control signaling. The associated feedback schemes, including those that facilitate dynamic switching, are discussed. Performance evaluation is conducted to demonstrate the gain of dynamically switched single-user and multiuser MIMO as opposed to traditional single-user MIMO. [ABSTRACT FROM PUBLISHER]