Search

Elastic degree of anisotropy (DoA) is a diagnostically relevant biomarker in muscle, kidney, breast, and other organs. Previously, elastic DoA was qualitatively assessed as the ratio of peak displacements (PD) achieved with the long-axis of a spatially asymmetric Acoustic Radiation Force Impulse (ARFI) excitation point spread function (PSF) aligned along versus across the axis of symmetry (AoS) in transversely isotropic materials. However, to better enable longitudinal and cross-sectional analyses, a quantitative measure of elastic DoA is desirable. In this study, qualitative ARFI PD ratios are converted to quantitative DoA, measured as the ratio of longitudinal over transverse shear elastic moduli, using a model empirically derived from Field II and finite element method (FEM) simulations. In silico, the median absolute percent error (MAPE) in ARFI-derived shear moduli ratio (SMR) was 1.75%, and predicted SMRs were robust to variations in transverse shear modulus, Young's moduli ratio, speed of sound, attenuation, density, and ARFI excitation PSF dimension. Further, ARFI-derived SMRs distinguished two materials when the true SMRs of the compared materials differed by as little as 10%. Experimentally, ARFI-derived SMRs linearly correlated with the corresponding ratios measured by Shear Wave Elasticity Imaging (SWEI) in excised pig skeletal muscle ( [Formula: see text], MAPE = 13%) and in pig kidney, in vivo ( [Formula: see text], MAPE = 5.3%). These results demonstrate the feasibility of using the ARFI PD to quantify elastic DoA in biological tissues.

In magnetomotive ultrasound (MMUS) imaging, an oscillating external magnetic field displaces tissue loaded with super-paramagnetic iron oxide (SPIO) particles. The induced motion is on the nanometer scale, which makes its detection and its isolation from background motion challenging. Previously, a frequency and phase locking (FPL) algorithm was used to suppress background motion by subtracting magnetic field off (B-off) from on (B-on) data. Shortcomings to this approach include long tracking ensembles and the requirement for B-off data. In this article, a novel blind source separation based FPL (BSS-FPL) algorithm is presented for detecting motion using a shorter ensemble length than FPL and without B-off data. MMUS imaging of 2 phantoms containing an SPIO-laden cubical inclusion and 1 control phantom was performed using an open-air MMUS system. When background subtraction was used, contrast, and contrast to noise ratio (CNR) were respectively 1.20 ± 0.20 and 1.56 ± 0.34 times higher in BSS-FPL as compared to FPL-derived images for ensemble lengths < 3.5s. However, contrast and CNR were similar for BSS-FPL and FPL for ensemble lengths ≥ 3.5s. When only B-on data was used, contrast and CNR were 1.94 ± 0.21 and 1.56 ± 0.28 times higher respectively in BSS-FPL as compared to FPL-derived images for all ensemble lengths. Percent error in the estimated width and height was 39.30 ± 19.98 % and 110.37 ± 6.5 % for FPL and was 7.30 ± 7.6 % and 16.21 ± 10.29 % for BSS-FPL algorithm. This study is an important step toward translating MMUS imaging to in vivo application, where long tracking ensembles would increase acquisition time and B-off data may be misaligned with B-on due to physiological motion.

Acute cerebrovascular accidents are associated with the rupture of vulnerable atherosclerotic plaques in the carotid arteries. Fibrous cap thickness has been shown to be an important predictor of plaque rupture, but has been challenging to measure accurately with clinical noninvasive imaging modalities. The goals of this investigation were first, to evaluate the feasibility of using transcutaneous acoustic radiation force impulse (ARFI) ultrasound to quantify fibrous cap thickness and second, to optimize both imaging and motion tracking parameters to support such measurements. Fibrous caps with varying thickness (0.1 – 1.0 mm) were simulated using a simple layered geometry, and their mechanical response to an impulse of radiation force was solved using finite element method (FEM) modeling. Ultrasound tracking of FEM displacements was performed in Field II utilizing three center frequencies (6, 9, and 12 MHz) and eight motion tracking kernel lengths (0.5λ – 4λ). Additionally, fibrous cap thickness in two carotid plaques imaged in vivo was measured with ARFI and compared to matched histology. The results of this study demonstrate that 1) tracking pulse frequencies around 12 MHz are necessary to resolve caps around 0.2 mm, 2) large motion-tracking kernel sizes introduce bias into thickness measurements and overestimate the true cap thickness, and 3) color saturation settings on ARFI peak displacement images can impact thickness measurement accuracy substantially.

Acoustic radiation force impulse (ARFI) imaging is an elastography technique that uses ultrasonic pulses to displace and track tissue motion. Previous modeling studies have shown that ARFI displacements are susceptible to underestimation due to lateral and elevational shearing that occurs within the tracking resolution cell. In this study, optical tracking was utilized to experimentally measure the displacement underestimation achieved by acoustic tracking using a clinical ultrasound system. Three optically translucent phantoms of varying stiffness were created, embedded with subwavelength diameter microspheres, and ARFI excitation pulses with F/1.5 or F/3 lateral focal configurations were transmitted from a standard linear array to induce phantom motion. Displacements were tracked using confocal optical and acoustic methods. As predicted by earlier finite element method studies, significant acoustic displacement underestimation was observed for both excitation focal configurations; the maximum underestimation error was 35% of the optically measured displacement for the F/1.5 excitation pulse in the softest phantom. Using higher F/#, less tightly focused beams in the lateral dimension improved accuracy of displacements by approximately 10 percentage points. This work experimentally demonstrates limitations of ARFI implemented on a clinical scanner using a standard linear array and sets up a framework for future displacement tracking validation studies.

The ability to image platelets in vivo can provide insight into blood clotting processes and coagulopathies, and aid in identifying sites of vascular endothelial damage related to trauma or cardiovascular disease. Toward this end, we have developed a magnetomotive ultrasound (MMUS) system that provides contrast-enhanced imaging of superparamagnetic iron oxide (SPIO) labeled platelets via magnetically-induced vibration. Platelets are a promising platform for functional imaging contrast because they readily take up SPIOs and are easily harvested from blood. Here we report a novel MMUS system that accommodates an arbitrarily thick sample while maintaining portability. We employed a frequency- and phase-locked motion detection algorithm based on bandpass filtering of the differential RF phase, which allows for the detection of sub-resolution vibration amplitudes on the order of several nanometers. We then demonstrated MMUS in homogenous tissue phantoms at SPIO concentrations as low as 0.09?mg ml?1?Fe (p < 0.0001, n = 6, t-test). Finally, we showed that our system is capable of three-dimensional imaging of a 185??L simulated clot containing SPIO-platelets. This highlights the potential utility for non-invasive imaging of platelet-rich clots, which would constitute a fundamental advance in technology for the study of hemostasis and detection of clinically relevant thrombi.

Background Studies published in the 1970s by Mostafa S. Fahim and colleagues showed that a short treatment with ultrasound caused the depletion of germ cells and infertility. The goal of the current study was to determine if a commercially available therapeutic ultrasound generator and transducer could be used as the basis for a male contraceptive. Methods Sprague-Dawley rats were anesthetized and their testes were treated with 1 MHz or 3 MHz ultrasound while varying power, duration and temperature of treatment. Results We found that 3 MHz ultrasound delivered with 2.2 Watt per square cm power for fifteen minutes was necessary to deplete spermatocytes and spermatids from the testis and that this treatment significantly reduced epididymal sperm reserves. 3 MHz ultrasound treatment reduced total epididymal sperm count 10-fold lower than the wet-heat control and decreased motile sperm counts 1,000-fold lower than wet-heat alone. The current treatment regimen provided nominally more energy to the treatment chamber than Fahim's originally reported conditions of 1 MHz ultrasound delivered at 1 Watt per square cm for ten minutes. However, the true spatial average intensity, effective radiating area and power output of the transducers used by Fahim were not reported, making a direct comparison impossible. We found that germ cell depletion was most uniform and effective when we rotated the therapeutic transducer to mitigate non-uniformity of the beam field. The lowest sperm count was achieved when the coupling medium (3% saline) was held at 37 degrees C and two consecutive 15-minute treatments of 3 MHz ultrasound at 2.2 Watt per square cm were separated by 2 days. Conclusions The non-invasive nature of ultrasound and its efficacy in reducing sperm count make therapeutic ultrasound a promising candidate for a male contraceptive. However, further studies must be conducted to confirm its efficacy in providing a contraceptive effect, to test the result of repeated use, to verify that the contraceptive effect is reversible and to demonstrate that there are no detrimental, long-term effects from using ultrasound as a method of male contraception.

In ultrasound images, clutter is a noise artifact most easily observed in anechoic or hypoechoic regions. It appears as diffuse echoes overlying anatomical structures of diagnostic importance, obscuring tissue borders and reducing image contrast. A novel clutter reduction method for abdominal images is proposed, wherein the abdominal wall is displaced during successive-frame image acquisitions. A region of clutter distal to the abdominal wall was observed to move with the abdominal wall, and finite impulse response (FIR) and blind source separation (BSS) motion filters were implemented to reduce this clutter. The proposed clutter reduction method was tested in simulated and phantom data and applied to fundamental and harmonic in vivo bladder and liver images from 2 volunteers. Results show clutter reductions ranging from 0 to 18 dB in FIR-filtered images and 9 to 27 dB in BSS-filtered images. The contrast-to-noise ratio was improved by 21 to 68% and 44 to 108% in FIR- and BSS-filtered images, respectively. Improvements in contrast ranged from 4 to 12 dB. The method shows promise for reducing clutter in other abdominal images.

Seventy percent of cardiovascular disease (CVD) deaths are attributed to atherosclerosis. Despite their clinical significance, nonstenotic atherosclerotic plaques are not effectively detected by conventional atherosclerosis imaging methods. Moreover, conventional imaging methods are insufficient for describing plaque composition, which is relevant to cardiovascular risk assessment. Atherosclerosis imaging technologies capable of improving plaque detection and stratifying cardiovascular risk are needed. Acoustic radiation force impulse (ARFI) ultrasound, a novel imaging method for noninvasively differentiating the mechanical properties of tissue, is demonstrated for in vivo detection of nonstenotic plaques and plaque material assessment in this pilot investigation. In vivo ARFI imaging was performed on four iliac arteries: (1) of a normocholesterolemic pig with no atherosclerosis as a control, (2) of a familial hypercholesterolemic pig with diffuse atherosclerosis, (3) of a normocholesterolemic pig fed a high-fat diet with early atherosclerotic plaques and (4) of a familial hypercholesterolemic pig with diffuse atherosclerosis and a small, minimally occlusive plaque. ARFI results were compared with spatially matched immunohistochemistry, showing correlations between elastin and collagen content and ARFI-derived peak displacement and recovery time parameters. Faster recoveries from ARFI-induced peak displacements and smaller peak displacements were observed in areas of higher elastin and collagen content. Importantly, spatial correlations between tissue content and ARFI results were consistent and observable in large and highly evolved as well as small plaques. ARFI imaging successfully distinguished nonstenotic plaques, while conventional B-mode ultrasound did not. This work validates the potential relevance of ARFI imaging as a noninvasive imaging technology for in vivo detection and material assessment of atherosclerotic plaques.

We introduce a new method for automatic classification of acoustic radiation force impulse (ARFI) displacement profiles using what have been termed "robust" methods for principal component analysis (PCA) and clustering. Unlike classical approaches, the robust methods are less sensitive to high variance outlier profiles and require no a priori information regarding expected tissue response to ARFI excitation. We first validate our methods using synthetic data with additive noise and/or outlier curves. Second, the robust techniques are applied to classifying ARFI displacement profiles acquired in an atherosclerotic familial hypercholesterolemic (FH) pig iliac artery in vivo. The in-vivo classification results are compared with parametric ARFI images showing peak induced displacement and time to 67% recovery and to spatially correlated immunohistochemistry. Our results support that robust techniques outperform conventional PCA and clustering approaches to classification when ARFI data are inclusive of low to relatively high noise levels (up to 5 dB average signal-to-noise [SNR] to amplitude) but no outliers: for example, 99.53% correct for robust techniques vs. 97.75% correct for the classical approach. The robust techniques also perform better than conventional approaches when ARFI data are inclusive of moderately high noise levels (10 dB average SNR to amplitude) in addition to a high concentration of outlier displacement profiles (10% outlier content): for example, 99.87% correct for robust techniques vs. 33.33% correct for the classical approach. This work suggests that automatic identification of tissue structures exhibiting similar displacement responses to ARFI excitation is possible, even in the context of outlier profiles. Moreover, this work represents an important first step toward automatic correlation of ARFI data to spatially matched immunohistochemistry.

Optical coherence tomography (OCT) provides 3D tissue imaging by contrasting light backscattering. OCT also senses nanoscale motions from optical phase shifts. We employ temporally modulated magnetic field gradients to mechanically displace superparamagnetic iron oxide nanoparticles (SPIOs). By locking in to the modulation frequency, SPIOs are contrasted in OCT, dubbed magnetomotive OCT (MMOCT).Rehydrated lyophilized human platelets (“RL platelets”), are chemically stabilized infusion hemostatic agents retaining viability. We investigate similar dried platelets with intracellular SPIOs (“SPIO platelets”) as imaging therapeutics. SPIOs are uptaken into the surface connected open canalicular system of platelets where they form clusters. Platelets are then stabilized and dried with the same methods as RL platelets. These SPIO platelets retain the primary hemostatic functions of RL and fresh platelets.We found that MMOCT provides highly specific contrast to SPIO platelets at 1.5e6/μL in 1% agarose scaffolding (see figure). Furthermore, by sweeping the modulation frequency, a mechanical frequency spectrum is obtained, and resonance peaks are associated with the sample elasticity. This has potential for imaging sites of vascular damage and monitoring the local mechanical microenvironment to provide more detailed information about vascular pathologies.View Large Image | View Hi-Res Image | Download PowerPoint Slide