Search

Optical interferometric sensors have acquired significant importance in metrology and information technology, especially in terms of their potential application in launching size, selectivity, sensitivity, resolution, spectral tuning ranges, efficiency, and cost. However, these demands are often contradictory and counteract one another, and are thus difficult to simultaneously fulfill during their interaction. This review focuses on a detailed comparison of seven different strongly miniaturized sensor concepts investigating the limits of these demands. For the visible and near-infrared spectral range, seven optical sensors were reviewed based on the following methodologies: classical optical transmission and reflection gratings, arrayed waveguide gratings, static Fabry–Pérot (FP) filter arrays, MEMS tunable FP interferometers, MEMS tunable photonic crystals, plasmonic filters, and fiber tip sensors. The comparison between the selected concepts concentrates on (i) the minimum space required for a particular spectral range, (ii) resolution, (iii) the integration in optical fiber technology, (iv) tunability to save space, (v) efficiency in using available light, (vi) multiplexing, (vii) miniaturization limits, and (viii) the potential of nanoimprint for cost reduction. Technologies for enhancing efficiency to obtain more available light and their applicability to the different methodologies were studied.

Optical spectrometers and sensors have gained enormous importance in metrology and information technology, frequently involving the question of size, resolution, sensitivity, spectral range, efficiency, reliability, and cost. Nanomaterials and nanotechnological fabrication technologies have huge potential to enable an optimization between these demands, which in some cases are counteracting each other. This paper focuses on the visible and near infrared spectral range and on five types of optical sensors (optical spectrometers): classical grating-based miniaturized spectrometers, arrayed waveguide grating devices, static Fabry–Pérot (FP) filter arrays on sensor arrays, tunable microelectromechanical systems (MEMS) FP filter arrays, and MEMS tunable photonic crystal filters. The comparison between this selection of concepts concentrates on (i) linewidth and resolution, (ii) required space for a selected spectral range, (iii) efficiency in using available light, and (iv) potential of nanoimprint for cost reduction and yield increase. The main part of this review deals with our own results in the field of static FP filter arrays and MEMS tunable FP filter arrays. In addition, technology for efficiency boosting to get more of the available light is demonstrated.

Different concepts for active windows for dynamic light regulation and vibrant climatization support in buildings are compared, followed by a MEMS concept using millions of micromirrors inside insulation or vacuum glazing to guide and control light by electrostatic mirror actuation. The concept enables energy saving, tailored personalized lighting, security, and smart personalized environments in buildings. The window transmission is controlled continuously, showing the eye a variable-tone pane. The amount, direction, and degree of steering of the guided light are tailored to winter, summer, and variable daytime requirements, protecting rooms and persons inside from sun-light while providing tailored natural daylight illumination. The concept is based on reflection, in contrast to existing concepts based on absorption. These micromirror arrays have been designed, fabricated, and characterized. Experimental results on electrostatic actuation voltages, extrapolated lifetime, power consumption, and heat impact regulation are presented. [ABSTRACT FROM AUTHOR]

Miniaturized spectrometers can be implemented using Fabry–Pérot (FP) filter arrays. Such filters are defined by two parallel mirrors with a resonance cavity in between. For high optical quality, ion beam sputtered distributed Bragg reflectors (DBRs), with alternating high and low refractive index material pairs, can be used as the FP mirrors; while 3D nanoimprint technology provides an efficient way of implementing multiple organic FP cavities of different heights in a single step. However, the high residual stress in ion beam sputtered films results in poor adhesion between the DBR films and the organic polymer cavities, causing debonding of the DBR. Therefore, the residual stress of the ion beam sputtered films forming the DBRs must be reduced. Niobium pentoxide (Nb2O5) and silicon dioxide (SiO2) are used as the DBR materials in this work due to their high index contrast, resulting in high reflectivity for only a few alternating pairs. Stress relaxation in ion beam sputtered Nb2O5 and SiO2 films is achieved in this work by deposition under simultaneous high energy ion bombardment (oxygen and argon gas mixture) from a second ion source. Using this technique, the film density and hence compressive film stress for both Nb2O5 and SiO2 films is reduced without introducing any additional optical absorption in the films. FP filter arrays fabricated with stress reduced Nb2O5 and SiO2 as DBR films exhibit high optical and mechanical performance, with good adhesion between the films and the polymer cavity. [ABSTRACT FROM AUTHOR]