Search

The development of high-performance polymer nanocomposites (NCs) requires a strong interfacial interaction between filler and polymer matrix and an optimal filler nanodispersion. Among layered silicates, sepiolite has attracted researcher attention because of its easy availability, low cost, strong mechanical and chemical stability, and anisotropic particle shape. Even if several applications of sepiolite-polymer materials have been proposed in literature, the use of pristine sepiolite as filler in elastomers is very limited due to its hydrophilic surface and to the consequent low affinity towards polymers. To face with these issues, we explored a new approach to prepare rubber NCs based on the use of nano-sized sepiolite (NS-Sep) fibers. Pristine and organically-modified sepiolites were structurally modified by an acid treatment, which provides NS-Sep fibers with reduced particle size and increased silanol groups on the layer surface, preserving the anisotropic features. NS-Sep fibers were used to prepare by ex-situ blending styrene-butadiene rubber (SBR) NCs. Morphological, spectroscopic, thermal and mechanical analyses were performed for a complete characterization of the hybrid materials.

Nuclear Magnetic Resonance (NMR) is an analytical technique extensively used in almost every chemical laboratory for structural identification. This technique provides statistically equivalent signals in spite of using spectrometer with different hardware features and is successfully used for the traceability and quantification of analytes in food samples. Nevertheless, to date only a few internationally agreed guidelines have been reported on the use of NMR for quantitative analysis. The main goal of the present study is to provide a methodological pipeline to assess the reproducibility of NMR data produced for a given matrix by spectrometers from different manufacturers, with different magnetic field strengths, age and hardware configurations. The results have been analyzed through a sequence of chemometric tests to generate a community-built calibration system which was used to verify the performance of the spectrometers and the reproducibility of the predicted sample concentrations.

Sepiolite clay is a natural filler particularly suitable to be used with polysaccharide matrices (e.g., in starch-based bio-nanocomposites), increasing their attractiveness for a wide range of applications, such as packaging. Herein, the effect of the processing (i.e., starch gelatinization, addition of glycerol as plasticizer, casting to obtain films) and of the sepiolite filler amount on the microstructure of starch-based nanocomposites was investigated by SS-NMR (solid-state nuclear magnetic resonance), XRD (X-ray diffraction) and FTIR (Fourier-transform infrared) spectroscopy. Morphology, transparency and thermal stability were then assessed by SEM (scanning electron microscope), TGA (thermogravimetric analysis) and UV–visible spectroscopy. It was demonstrated that the processing method allowed to disrupt the rigid lattice structure of semicrystalline starch and thus obtain amorphous flexible films, with high transparency and good thermal resistance. Moreover, the microstructure of the bio-nanocomposites was found to intrinsically depend on complex interactions among sepiolite, glycerol and starch chains, which are also supposed to affect the final properties of the starch–sepiolite composite materials.

Ladder-like polysilsesquioxanes (LPSQs) are characterized by a double-stranded siloxane backbone, whose chemical and structural properties depend on both the synthesis parameters and the nature of the organic side-chains. In the case of ladder-like (methacryloxypropyl) polysilsesquioxanes (LPMASQ), polymer matrices can be produced by exploiting the presence of photocurable methacrylate groups. Consequently, they can be used to prepare functional nanocomposites (NCs), either by blending with organic polymers such as polybutadiene or exploiting the inorganic fillers’ dispersion. Since the properties of LPMASQ-based NCs are strongly related to their structure, the structural changes of polymerized LPMASQ were investigated upon addition of low loadings of TiO2 nanoparticles (up to 3 wt%) by solid state nuclear magnetic resonance and X-ray diffraction. The filler addition leads to the reduction of the polymerization capacity of the LPMASQ organic side-chains. Moreover, a different organization of ladder chains has been highlighted, ascribable to the increase in fully condensed linear ladder units at the expenses of folded chains and defective structures. The methodological approach here adopted can be extended to other composite systems and may help to describe the properties at the filler-matrix interface, offering valuable hints for a better design of these materials. Graphical Abstract

The present study reports on the synthesis of a new alkoxysilane-bearing light-responsive cinnamyl group and its application as a surface functionalization agent for the development of SiO2 nanoparticles (NPs) with photoreversible tails. In detail, cinnamic acid (CINN) was activated with N-hydroxysuccinimide (NHS) to obtain the corresponding NHS-ester (CINN-NHS). Subsequently, the amine group of 3-aminopropyltriethoxysilane (APTES) was acylated with CINN-NHS leading to the generation of a novel organosilane, CINN-APTES, which was then exploited for decorating SiO2 NPs. The covalent bond to the silica surface was confirmed by solid state NMR, whereas thermogravimetric analysis unveiled a functionalization degree much higher compared to that achieved by a conventional double-step post-grafting procedure. In light of these intriguing results, the strategy was successfully extended to naturally occurring sepiolite fibers, widely employed as fillers in technological applications. Finally, a preliminary proof of concept of the photoreversibility of the obtained SiO2@CINN-APTES system has been carried out through UV diffuse reflectance. The overall outcomes prove the consistency and the versatility of the methodological protocol adopted, which appears promising for the design of hybrid NPs to be employed as building blocks for photoresponsive materials with the ability to change their molecular structure and subsequent properties when exposed to different light stimuli.

The interaction between activators (ZnO) and co-activators (stearic acid, SA) represents a key step in the vulcanization process, to generate Zn(II) intermediate complexes that enhance the reaction kinetic and promote the shortening of sulfur bridges, leading to highly cross-linked materials. To understand the influence of the structural, morphological and surface properties of ZnO in the reactivity with SA, in this work, pure ZnO nanoparticles (NPs) and ZnO NPs anchored on SiO2 (ZnO/SiO2) were prepared through soft chemistry techniques. Tailoring of morphology and surface features was accomplished through a fine control of the synthetic parameters, as demonstrated by the careful characterization of the activators. Then, the interaction of pure ZnO and ZnO/SiO2 activators with SA in the absence of rubber was investigated by using Differential Scanning Calorimetry (DSC). The occurrence of Zn(II)-SA complexes with different thermal stability and structural properties was assessed by a comprehensive thermogravimetric and spectroscopic survey. The generation and the chemical structure of these specific vulcanization intermediates was related to the peculiar characteristics of the ZnO/SiO2 systems and, in turn, to their ability in imparting faster kinetics and higher curing efficiency to isoprene rubber nanocomposites, compared to bare ZnO. These results, besides proposing a valid benchmark for achieving further insights on the interaction of stearic acid with activators, pave the way to provide specific protocols for a better design and implementation of ZnO-based materials able to effectively enhance the rubber vulcanization process, with significant economic and environmental advantages.

Ladder-like silsesquioxanes (SSQs) and TiO2 have been functionalized with methacryloyloxypropyl chains and embedded in a polybutadiene (PB) matrix giving rise to hybrid (organic–inorganic) nanocomposites (NCs) capable of acting as oxygen scavenging materials. The joint use of infrared spectroscopy, small-angle X-ray scattering, and permittivity measurements highlighted that the presence of TiO2, regardless of its modification, does not significantly alter the structure of the NCs, but just reduces the crosslinking degree and induces a local disorganization of the ladder-like SSQ stacks. The introduction of an optimum amount (0.5 wt%) of modified TiO2 within the polymeric matrix enhanced the oxygen uptake rate of ca. 70% with respect to the sole polymeric material. Moreover, the uptake kinetics changes from the first to second order with respect to the PB amount, clearly indicating different oxidation mechanisms. NCs containing modified TiO2 showed an oxygen uptake rate ranging from 30 to 60% higher than that achievable in the presence of bare TiO2. The superior activity of the materials containing modified TiO2 has been related to mechanistic aspects. Fluorescence and electron spin resonance spectroscopies allowed to underline the role of singlet oxygen within the polymeric matrix, although the known photochemical oxidation of PB and the TiO2 induced hydroxyl radical mediated oxidation cannot be excluded. These results open the route to highly efficient flexible oxygen scavenging materials for the protection of electronic devices such as organic based light emitting diodes, solar cells, and liquid crystal displays, which require high targets of protection from oxygen and water.

ZnO is a worldwide used activator for a rubber vulcanization process, which promotes fast curing kinetics and high cross-linking densities of rubber nanocomposites (NCs). However, its extended use together with leaching phenomena occurring during the production and life cycle of rubber products, especially tires, entails potential environmental risks, as ecotoxicity toward aquatic organisms. Pushed by this issue, a novel activator was developed, which introduces highly dispersed and active zinc species in the vulcanization process, reducing the amount of employed ZnO and keeping high the curing efficiency. The activator is constituted by Zn(II) single sites, anchored on the surface of SiO2 nanoparticles (NPs) through the coordination with functionalizing amino silane groups. It behaves as a double-function material, acting at the same time as a rubber reinforcing filler and a curing activator. The higher availability and reactivity of the single-site Zn(II) centers toward curative agents impart faster kinetics and higher efficiency to the vulcanization process of silica/isoprene NCs, compared to conventionally used ZnO activators. Moreover, the NCs show a high cross-linking degree and improved dynamic mechanical properties, despite the remarkably lower amount of zinc employed than that normally used for rubber composites in tires. Finally, the structural stability of Zn(II) single sites during the curing reactions and in the final materials may represent a turning point toward the elimination of zinc leaching phenomena.

The present study explores the exploitation of ladder-like polysilsesquioxanes (PSQs) bearing reactive functional groups in conjunction with SiO2 nanoparticles (NPs) to produce UV-curable nanocomposite coatings with increased hydrophobicity and good thermal resistance. In detail, a medium degree regular ladder-like structured poly (methacryloxypropyl) silsesquioxane (LPMASQ) and silica NPs, either naked or functionalized with a methacrylsilane (SiO2@TMMS), were blended and then irradiated in the form of a film. Material characterization evidenced significant modifications of the structural organization of the LPMASQ backbone and, in particular, a rearrangement of the silsesquioxane chains at the interface upon introduction of the functionalized silica NPs. This leads to remarkable thermal resistance and enhanced hydrophobic features in the final nanocomposite. The results suggest that the adopted strategy, in comparison with mostly difficult and expensive surface modification and structuring protocols, may provide tailored functional properties without modifying the surface roughness or the functionalities of silsesquioxanes, but simply tuning their interactions at the hybrid interface with silica fillers.

The development of advanced polymer nanocomposites requires a strong filler-polymer interfacial interaction and an optimal filler nanodispersion. The incorporation of the clays into a polymer matrix frequently does not improve the composite mechanical properties, owing to both poor dispersion and macroscopic particle dimensions. In this work, pristine and organically-modified sepiolites (Sep) were structurally modified by an acid treatment, which provides nano-sized sepiolite (NS-Sep) fibers with reduced particle size and increased silanol groups on the surface layer. NS-Sep fibers were used to prepare styrene-butadiene rubber nanocomposites with enhanced mechanical properties. Dynamic-mechanical analysis of clay polymer nanocomposites demonstrated that the NS-Sep fibers provided an excellent balance between reinforcing and hysteretic behavior, compared to the large-sized pristine Sep and isotropic silica. This was related to the enhanced interfacial chemical interaction between NS-Sep and rubber, as well as to the size and self-assembly of anisotropic nanofibers to form filler network structures, as supported by transmission electron microscopy analysis. The preparation of nanocomposites, based on Sep nanofibers obtained by a simple and versatile acid treatment, can thus be considered an alternative approach for the designing of advanced clay polymer nanocomposites.

A novel hybrid nanofiller, SiO2@POSS, where the silica nanoparticles (NPs) and the POSS belong to the same functional structure, has been synthesized by grafting different loadings of OctaMethacrylPOSS onto silanized commercial SiO2, using a surface reaction mediated by dicumylperoxide (DCP). The peroxide, besides anchoring the nanocages onto the silica surface, ensures the presence of methacryl functionalities in the final structure, which are still available for cross-linking reactions with a polymer host. The hybrid SiO2@POSS NPs were used to prepare, by ex situ blending, SBR nanocomposites. The dynamic-mechanical analysis performed on the cured SBR/SiO2@ POSS composites indicated that the presence of POSS induces a remarkable increase of modulus either at low or at high strain, and a considerable decrease of hysteresis. This has been associated with the peculiar hybrid structure of the SiO2@POSS filler, in which silica NP aggregates are partially interconnected and surrounded by a thin shell of POSS nanounits which, thanks to their high number of reactive functionalities, promote the formation of "sticky regions'' among the silica aggregates and, consequently, a tight filler network wherein rubber is immobilized. This grants a relevant reinforcement and increased hysteretic properties, suggesting SiO2@POSS as a promising filler system for decreasing the energy loss under strain and for leading to a potential reduction of filler utilization in rubber composite formulations.

ZnO nanoparticles (NPs) were anchored to SiO 2 spherical nanoparticles by hydrolysis and condensation of Zn(CH 3 COO) 2 in the presence of SiO 2 . The ZnO/SiO 2 NPs were then blended with isoprene rubber. The immobilization of ZnO NPs on the silica surface, due to covalent Si O Zn bonds provides a homogeneous dispersion of zinc in the rubber matrix and increases the accessibility of the curative reactants to Zn 2+ ions. This improves the efficiency of the rubber curing and reduces the amount of used ZnO.