Search

A novel directive and nondispersive antenna is presented: the ultrawideband (UWB) leaky lens. It is based on the broad band Cherenkov radiation occurring at a slot printed between different infinite homogeneous dielectrics. The first part of the paper presents the antenna concept and the UWB design. The issues that are specifically addressed include the impedance matching, the radiation pattern and the phase purity. Subsequently the hardware demonstrator and the results of the measurement campaign are shown. The results fully validate the antenna concept. The antenna presents decade bandwidth impedance matching, directive and frequency independent patterns in the H-plane over two octaves, negligible cross-polarization levels, weak amplitude dispersivity and, according to the authors, the most stable phase center for a directive antenna over an ultra wide frequency range. Index Terms--Cross polarization, pulse excited antennas, transfer functions, ultrawideband (UWB) antennas, ultrawideband radiation.

Problem matched basis functions are proposed for the method of moments analysis of printed slot coupled microstrips. The appropriate equivalent currents of the integral equation kernel are represented in terms of two sets of entire domain basis functions. These functions synthesize on one hand the resonant behavior of slots, microstrips or dipoles and on the other hand the field in proximity of the feeding source and of the discontinuities. In order to define these basis functions, canonical geometries are identified, whose Green's functions have been found in semi-analytical form. The accuracy and the effectiveness of the method in terms of convergence rate and number of unknowns is demonstrated by comparison with a standard fine meshing full-wave analysis. The method is extremely convenient for large arrays, where the subwavelength details should be treated together with large global dimensions. Since the proposed solution is independent of the dimensions of these details, it provides dramatic reduction of the number of unknowns and improvement of condition number. Index Terms--Entire domain basis functions, Green's functions, method of moments (MoM).

A novel type of leaky-wave antenna is presented. Differently from previously reported leaky-wave antennas, it is characterized by a constant beam direction over a very wide range of frequencies. The radiation originates at a slot etched at the interface between air and a dense dielectric, which is shaped to form a cylinder of elliptical cross sections of decreasing dimensions. Two prototypes have been designed, manufactured, and tested. The measurements are in very good agreement with the expectations, demonstrating the potentials of the leaky lens concept to realize integrated transmitters or receivers that are extremely broadband and directive. Index Terms--Broad-band antennas, leaky waves, lens antennas, slot antennas.

Low relative permittivity plastic elliptical lenses in combination with integrated focal plane arrays are a promising solution to be used in the future mm- and sub-mm-wave systems. Their appeal lies in the availability of materials with moderate loss and lightweight, and the possibility to use cost-effective manufacturing techniques. However, the achievable scanning angular range is relatively small with low permittivity lenses. In this article, we explore the use of dielectric gratings with modulated height integrated in the lens material, with the aim of enlarging the steering angle. The dielectric gratings synthesize a tilted feed pattern, reducing the reflection loss and spillover when illuminating the lens off-focus. A quasi-analytic approach based on the Floquet mode analysis of the gratings is used to synthesize the grating profile. This method is combined with an analysis in reception of the lens antenna. A wideband prototype in $G$ -band (140–220 GHz) has been fabricated, achieving a field of view of ±25° with gain >30 dBi. [ABSTRACT FROM AUTHOR]

In this contribution, a broadband $G$ -band leaky-wave (LW) fed lens antenna with an integrated dielectric grid polarizer is presented. The proposed wideband polarizer unit cell geometry enables its fabrication at frequencies higher than 100 GHz, presenting high transmission properties and low axial ratio (AR). A quasi-analytic technique based on multilayer spectral Green’s function combined with a numerical Floquet modes’ solver is used to optimize the lens aperture efficiency and AR. The proposed technique is validated via full-wave (FW) simulations. A design is proposed in low dielectric permittivity material, achieving FW simulated aperture efficiency higher than 75% over 44% relative bandwidth, and an AR lower than 3 dB over 35% relative bandwidth. The antenna is able to achieve multiple directive circularly polarized (CP) beams when fed by a focal plane array, preserving the AR bandwidth. A prototype has been fabricated and measured, exhibiting an excellent agreement with quasi-analytic and FW simulations. [ABSTRACT FROM AUTHOR]

In order to fulfill the exponential increase in the demand of high-speed wireless links, future XG wireless networks will be developed at higher carrier signal frequencies, reaching the hundreds of gigahertz. In this contribution, a leaky-wave-fed HDPE lens antenna working at ${G}$ -band which can be useful for future XG communications is presented. The proposed lens design enables the generation of up to 40 beams, with gains higher than 30 dB. Analytical tools have been applied to optimize the lens aperture efficiency, validating the results via full-wave simulations. The reached aperture efficiency for the broadside beam is higher than 80% over a 44% relative bandwidth. The measurement results for a fabricated prototype show excellent agreement with the simulated performance. [ABSTRACT FROM AUTHOR]

This article proposes an innovative method for extending the scan range of phased arrays based on Rotman lens by a factor two. The main objective is to take advantage of the performance of the Rotman lens as beamforming network, resolving its intrinsic increase of phase error and coupling losses when wide scan angles are required. The proposed concept aims to overcome these limitations by introducing the combination of two specific operations called “complete beam shifting (CBS)” and “beam mirroring (BM).” The described technique is applied to a 24 GHz scanning array antenna system, designed and manufactured by taking into consideration fabrication and related cost issues. Finally, the proposed concept has been validated through measurements. [ABSTRACT FROM AUTHOR]

Problem matched basis functions are proposed for the method of moments analysis of printed slot coupled microstrips. The appropriate equivalent currents of the integral equation kernel are represented in terms of two sets of entire domain basis functions. These functions synthesize on one hand the resonant behavior of slots, microstrips or dipoles and on the other hand the field in proximity of the feeding source and of the discontinuities. In order to define these basis functions, canonical geometries are identified, whose Green's functions have been found in semi-analytical form. The accuracy and the effectiveness of the method in terms of convergence rate and number of unknowns is demonstrated by comparison with a standard fine meshing full-wave analysis. The method is extremely convenient for large arrays, where the subwavelength details should be treated together with large global dimensions. Since the proposed solution is independent of the dimensions of these details, it provides dramatic reduction of the number of unknowns and improvement of condition number. [ABSTRACT FROM AUTHOR]