Search

Invited for this month's cover is the group of Bert M. Weckhuysen at the Utrecht University (The Netherlands). The cover picture shows an attenuated Total Reflection Infrared spectroscopy (ATR-IR) probe monitoring a chemical reaction in the liquid phase, particularly water, at demanding conditions. The light penetrates few microns deep in proximity of the ATR-IR probe and thus any IR-active entity in that range is probed. This research systematically addresses the challenges associated with acquiring operando ATR-IR spectra for liquid/aqueous phase reactions, which is essential for better understanding of chemical reactions in the liquid phase. Read the full text of their Full Paper at 10.1002/cmtd.202100041.

The Front Cover shows an attenuated Total Reflection Infrared spectroscopy (ATR-IR) probe monitoring a chemical reaction in the liquid phase, particularly water, at demanding conditions. The light penetrates few microns deep in proximity of the ATR-IR probe and thus any IR-active entity in that range is probed. This research systematically addresses the challenges associated with acquiring operando ATR-IR spectra for liquid/aqueous phase reactions, which is essential for better understanding of chemical reactions in the liquid phase. More information can be found in the Full Paper by Khaled N. M. Khalili et al.

The Diels-Alder (DA) reaction of furans is a versatile tool in synthetic organic chemistry and in the production of sustainable building blocks and smart materials. Numerous experimental and theoretical investigations suggest that the diene scope is effectively limited to electron-rich furans, which excludes the most abundant and readily accessible renewable derivatives: furfural and its 5-hydroxymethyl homologue. Herein we show for the first time that electron-poor 2-formylfurans can also directly engage in Diels-Alder couplings. The key to success is the use of aqueous medium, which supplies an additional thermodynamic driving force by coupling the unfavorable DA equilibrium to the exergonic hydration of the carbonyl functionality in the adducts to form geminal diols. This finding enables the direct access to various novel DA adducts derived from renewable furfurals and maleimides, via a mild, simple and environmentally-friendly synthetic protocol.

Detailed structural analysis of industrial and model kraft lignins reveals an important new reaction intermediate and condensation pathway operating during kraft pulping., Kraft lignin, the main by-product of the pulping industry, is an abundant, yet highly underutilized renewable aromatic polymer. During kraft pulping, the lignin undergoes extensive structural modification, with many labile native bonds being replaced by new, more recalcitrant ones. Currently little is known about the nature of those bonds and linkages in kraft lignin, information that is essential for its efficient valorization to renewable fuels, materials or chemicals. Here, we provide detailed new insights into the structure of softwood kraft lignin, identifying and quantifying the major native as well as kraft pulping-derived units as a function of molecular weight. De novo synthetic kraft lignins, generated from (isotope labelled) dimeric and advanced polymeric models, provided key mechanistic understanding of kraft lignin formation, revealing different process dependent reaction pathways to be operating. The discovery of a novel kraft-derived lactone condensation product proved diagnostic for the identification of a previously unknown homovanillin based condensation pathway. The lactone marker is found in various different soft- and hardwood kraft lignins, suggesting the general pertinence of this new condensation mechanism for kraft pulping. These novel structural and mechanistic insights will aid the development of future biomass and lignin valorization technologies.

Ex situ catalytic biomass pyrolysis was investigated at both laboratory and bench scale by using a zeolite ZSM-5-based catalyst for selectively upgrading the bio-oil vapors. The catalyst consisted of nanocrystalline ZSM-5, modified by incorporation of ZrO2 and agglomerated with attapulgite (ZrO2 /n-ZSM-5-ATP). Characterization of this material by means of different techniques, including CO2 and NH3 temperature-programmed desorption (TPD), NMR spectroscopy, UV/Vis microspectroscopy, and fluorescence microscopy, showed that it possessed the right combination of accessibility and acid-base properties for promoting the conversion of the bulky molecules formed by lignocellulose pyrolysis and their subsequent deoxygenation to upgraded liquid organic fractions (bio-oil). The results obtained at the laboratory scale by varying the catalyst-to-biomass ratio (C/B) indicated that the ZrO2 /n-ZSM-5-ATP catalyst was more efficient for bio-oil deoxygenation than the parent zeolite n-ZSM-5, producing upgraded bio-oils with better combinations of mass and energy yields with respect to the oxygen content. The excellent performance of the ZrO2 /n-ZSM-5-ATP system was confirmed by working with a continuous bench-scale plant. The scale-up of the process, even with different raw biomasses as the feedstock, reaction conditions, and operation modes, was in line with the laboratory-scale results, leading to deoxygenation degrees of approximately 60 % with energy yields of approximately 70 % with respect to those of the thermal bio-oil.

The choice of TiO2 crystal phase (i. e., anatase, rutile, or brookite) greatly influences catalyst performance in the gas‐phase ketonization of small volatile fatty acids, such as acetic acid and propionic acid. Rutile TiO2 was found to perform best, combining superior activity, as exemplified by an exceptional reaction rate of 141.8 mmol h−1 gcat −1 (at 425 °C and 24 h−1) with excellent ketone selectivity when propionic acid was used. Brookite, to the best of our knowledge never reported before as a viable ketonization catalyst, was found to outperform the well‐studied anatase phase, but not rutile. Operando Fourier‐transform IR spectroscopy measurements combined with on‐line mass spectrometry showed that bidentate carboxylates were the most abundant surface species on the rutile and brookite surfaces, while on anatase both monodentate and bidentate carboxylates co‐existed. The bidendate carboxylates were thought to be precursors to the active ketonization species, likely monodentate intermediates more prone to C−C coupling. Ketonization activity did not directly correlate with acidity; the observed, strong crystal phase effect did suggest that ketonization activity is influenced strongly by geometrical factors that determine the ease of formation of the relevant surface intermediates., Rutile rules! Rutile proves highly active in the gas‐phase ketonization of volatile fatty acids, a versatile acid upgrading reaction. Operando IR measurements provide insight into why rutile outperforms other titania crystal phases.

A novel route for the production of the versatile chemical building block phthalide from biorenewable furfuryl alcohol and acrylate esters is presented. Two challenges that limit sustainable aromatics production via Diels–Alder (DA) aromatisation—an unfavourable equilibrium position and undesired regioselectivity when using asymmetric addends—were addressed using a dynamic kinetic trapping strategy. Activated acrylates were used to speed up the forward and reverse DA reactions, allowing for one of the four DA adducts to undergo a selective intramolecular lactonisation reaction in the presence of a weak base. The adduct is removed from the equilibrium pool, pulling the system completely to the product with a fixed, desired regiochemistry. A single 1,2‐regioisomeric lactone product was formed in up to 86 % yield and the acrylate activating agent liberated for reuse. The lactone was aromatised to give phthalide in almost quantitative yield in the presence of Ac2O and a catalytic amount of strong acid, or in 79 % using only catalytic acid., An intramolecular trapping strategy allows inherent problems in the Diels–Alder reaction of biomass‐derived furfuryl alcohol, such as regioselectivity and unfavourable equilibrium yields, to be overcome on the way to biomass‐derived aromatics. This strategy provides a high yielding, redox and atom economical approach to produce the versatile phthalide synthon.

Dehydrogenation promoters greatly enhance the performance of SiO2-MgO catalysts in the Lebedev process. Here, the effect of preparation method and order of addition of Cu on the structure and performance of Cu-promoted SiO2-MgO materials is detailed. Addition of Cu to MgO via incipient wetness impregnation (IWI) or coprecipitation (CP) prior to wet-kneading with SiO2 gave similar butadiene yields (similar to 40%) as when Cu was added to the already wet-kneaded catalyst. In contrast, the catalyst prepared by impregnation of Cu on SiO2 first proved to be the worst catalyst of the series. TEM, XRD, and XPS analyses suggested that, for all catalyst materials, Cu2+ forms a solid solution with MgO. This was confirmed by UV-vis, XANES, and EXAFS data, with Cu being found in a distorted octahedral geometry. As a result, the acid base properties, as determined by Pyridine- and CDCl3-IR as well as NH3-TPD, are modified, contributing to the improved performance. Operando XANES and EXAFS studies of the evolution of the copper species showed that Cu2+, the only species initially present, is extensively reduced to a mixture of Cu-0 and Cu+, leaving only a limited amount of unreduced Cu2+. This formation of Cu-0 is the result of the reducing environment of the Lebedev process and is thought to be mainly responsible for the improved performance of the Cu-promoted catalysts.

We used single-molecule fluorescence microscopy to study self-diffusion of a feedstock-like probe molecule with nanometer accuracy in the macropores of a micrometer-sized, real-life fluid catalytic cracking (FCC) particle. Movies of single fluorescent molecules allowed their movement through the pore network to be reconstructed. The observed tracks were classified into three different states by machine learning and all found to be distributed homogeneously over the particle. Most probe molecules (88%) were immobile, with the molecule most likely being physisorbed or trapped; the remainder was either mobile (8%), with the molecule moving inside the macropores, or showed hybrid behavior (4%). Mobile tracks had an average diffusion coefficient of D = 8 × 10-14 ± 1 × 10-13 m2 s-1, with the standard deviation thought to be related to the large range of pore sizes found in FCC particles. The developed methodology can be used to evaluate, quantify and map heterogeneities in diffusional properties within complex hierarchically porous materials. ispartof: JOURNAL OF THE AMERICAN CHEMICAL SOCIETY vol:139 issue:39 pages:13632-13635 ispartof: location:United States status: published

The presence of biogenic or process‐derived impurities poses a major problem on the efficient catalytic hydrogenation of biomass‐derived levulinic acid to γ‐valerolactone; hence, studies on their influence on catalyst stability are now required. Herein, the influence of sulfuric acid as feed impurity on the performance of Ru‐based heterogeneous catalysts, including Ru/ZrO2 and mono‐ and bimetallic Ru‐on‐carbon catalysts in dioxane as solvent, was investigated. The carbon‐supported Ru catalysts proved to be very sensitive to minor amounts of sulfuric acid. In stark contrast, Ru/ZrO2 showed a remarkable stability in the presence of the same impurity, which is attributed to the sulfate‐ion adsorption capacity of the support. Preferential sulfate adsorption onto the surface of ZrO2 effectively protects the Ru active phase from deactivation by sulfur poisoning. A simple catalyst regeneration strategy was effective in removing adsorbed impurities, allowing efficient catalyst recycling.

Lignin and humins are both (by-)products of biorefining processes aimed at the valorization of lignocellulosic biomass. In order to improve the efficiency of such biorefineries and to develop new valorization pathways for these polymeric materials, detailed insight into their complex chemical structure and functional group distribution is required. Here, we report on the quantification and classification of the ketone and aldehyde carbonyl functional groups contained in these two polymers by 19F NMR. The known method of carbonyl derivatization with 4-(trifluoromethyl)phenylhydrazine to the corresponding hydrazone has been improved and simplified, allowing derivatization directly in an NMR tube, requiring no additional workup before quantification by 19F NMR. Furthermore, the scope of the method was assessed and expanded, with model compound studies, which included monomeric and dimeric compounds as well as synthetic polymers, showing that the carbonyl functions can indeed be reproducibly quantified. Using this model compound library, the carbonyl functional groups in two technical lignins (Indulin Kraft and Alcell) and, for the first time, an industrial humin could be quantified and classified. The industrial humin was found to contain 6.6 wt % of carbonyl functions, with aliphatic and conjugated carbonyls being detected. The relatively high abundance of such functional groups, which are amenable to further chemical modification, provides opportunities for the use of these humin byproducts in various applications, e.g., as materials after derivatization.

Bio‐based furanics can be aromatized efficiently by sequential Diels–Alder (DA) addition and hydrogenation steps followed by tandem catalytic aromatization. With a combination of zeolite H‐Y and Pd/C, the hydrogenated DA adduct of 2‐methylfuran and maleic anhydride can thus be aromatized in the liquid phase and, to a certain extent, decarboxylated to give high yields of the aromatic products 3‐methylphthalic anhydride and o‐ and m‐toluic acid. Here, it is shown that a variation in the acidity and textural properties of the solid acid as well as bifunctionality offers a handle on selectivity toward aromatic products. The zeolite component was found to dominate selectivity. Indeed, a linear correlation is found between 3‐methylphthalic anhydride yield and the product of (strong acid/total acidity) and mesopore volume of H‐Y, highlighting the need for balanced catalyst acidity and porosity. The efficient coupling of the dehydration and dehydrogenation steps by varying the zeolite‐to‐Pd/C ratio allowed the competitive decarboxylation reaction to be effectively suppressed, which led to an improved 3‐methylphthalic anhydride/total aromatics selectivity ratio of 80 % (89 % total aromatics yield). The incorporation of Pd nanoparticles in close proximity to the acid sites in bifunctional Pd/H‐Y catalysts also afforded a flexible means to control aromatic products selectivity, as further demonstrated in the aromatization of hydrogenated DA adducts from other diene/dienophile combinations.

Catalyst stability in the liquid phase under polar conditions, typically required for the catalytic conversion of renewable platform molecules, is a major concern but has been only sparsely studied. Here, the activity, selectivity, and stability of Ru-based catalysts supported on TiO2, ZrO2, and C in the conversion of levulinic acid (LA) to γ-valerolactone (GVL) has been studied at 30 bar of H2 and 423 K in dioxane as solvent. All catalysts showed excellent yields of GVL when used fresh, but only the Ru/ZrO2 catalyst could maintain these high yields upon multiple recycling. Surprisingly, the widely used Ru/TiO2 catalyst showed quick signs of deactivation already after the first catalytic test. XPS, CO/FT-IR, TGA, AC-STEM, and physisorption data showed that the partial deactivation is not due to Ru sintering or coking but rather due to reduction of the titania support in combination with partial coverage of the Ru nanoparticles, i.e. due to a detrimental strong metal–support interaction. In contrast, the zirconia support showed no signs of reduction and displayed high morphological and structural stability even after five recycling tests. Remarkably, in the fresh Ru/ZrO2 catalyst, Ru was found to be fully atomically dispersed on the fresh catalyst even at 1 wt % Ru loading, with some genesis of Ru nanoparticles being observed upon recycling. Further studies with the Ru/ZrO2 catalyst showed that dioxane can be readily replaced by more benign solvents, including GVL itself. The addition of water to the reaction mixture was furthermore shown to promote the selective hydrogenation reaction.

© 2016 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.Lignin is an abundant biopolymer with a high carbon content and high aromaticity. Despite its potential as a raw material for the fuel and chemical industries, lignin remains the most poorly utilised of the lignocellulosic biopolymers. Effective valorisation of lignin requires careful fine-tuning of multiple “upstream” (i.e., lignin bioengineering, lignin isolation and “early-stage catalytic conversion of lignin”) and “downstream” (i.e., lignin depolymerisation and upgrading) process stages, demanding input and understanding from a broad array of scientific disciplines. This review provides a “beginning-to-end” analysis of the recent advances reported in lignin valorisation. Particular emphasis is placed on the improved understanding of lignins biosynthesis and structure, differences in structure and chemical bonding between native and technical lignins, emerging catalytic valorisation strategies, and the relationships between lignin structure and catalyst performance.

Large zeolite crystals of ferrierite have been used to study the deactivation, at the single particle level, of the alkyl isomerisation catalysis of oleic acid and elaidic acid by a combination of visible micro-spectroscopy and fluorescence microscopy (both polarised wide-field and confocal modes). The large crystals did show the desired activity, albeit only traces of the isomerisation product were obtained and low conversions were achieved compared to commercial ferrierite powders. This limited activity is in line with their lower external non-basal surface area, supporting the hypothesis of pore mouth catalysis. Further evidence for the latter comes from visible micro-spectroscopy, which shows that the accumulation of aromatic species is limited to the crystal edges, while fluorescence microscopy strongly suggests the presence of polyenylic carbocations. Light polarisation associated with the spatial resolution of fluorescence microscopy reveals that these carbonaceous deposits are aligned only in the larger 10-MR channels of ferrierite at all crystal edges. The reaction is hence further limited to these specific pore mouths.

Renewable aromatics can be conveniently synthesized from furanics by introducing an intermediate hydrogenation step in the Diels–Alder (DA) aromatization route, to effectively block retro‐DA activity. Aromatization of the hydrogenated DA adducts requires tandem catalysis, using a metal‐based dehydrogenation catalyst and solid acid dehydration catalyst in toluene. Herein it is demonstrated that the hydrogenated DA adducts can instead be conveniently converted into renewable aromatics with up to 80 % selectivity in a solid‐phase reaction with shorter reaction times using only an acidic zeolite, that is, without solvent or dehydrogenation catalyst. Hydrogenated adducts from diene/dienophile combinations of (methylated) furans with maleic anhydride are efficiently converted into renewable aromatics with this new route. The zeolite H‐Y was found to perform the best and can be easily reused after calcination.

Humin by-products are formed during the acid-catalyzed dehydration of carbohydrates to bio-based platform molecules, such as hydroxymethylfurfural and levulinic acid. The molecular structure of these humins has not yet been unequivocally established. 1D C-13 solid-state NMR data reported have, for example, provided considerable insight, but do not allow for the unambiguous assignment of key structural motifs. Complementary (2D) techniques are needed to gain additional insight into the molecular structure of humins. Here, the preparation of C-13-enriched humins is reported, together with the reactive solubilization of these labeled humins and their characterization with complementary 1D and 2D solid-state NMR techniques. 1D cross polarization (CP) and direct excitation (DE) C-13 solid-state NMR spectra, 2D C-13-detected double-quantum single-quantum (DQSQ) as well as 2D H-1-detected heteronuclear correlation (HETCOR) were recorded with different excitation schemes. These experiments unambiguously established that the original humins have a furan-rich structure with aliphatic linkers and allowed for a refinement of the molecular structure proposed previously. Solid-state NMR data of alkali-treated C-13-labeled humins showed that an arene-rich structure is formed at the expense of the furanic network during alkaline pretreatment.

A method for the regioselective transformation of dienes to carbonyl compounds has been developed. Electron-rich olefins react selectively to yield valuable aldehydes and ketones. The method is based on the catalyst [Fe(OTf)2(mix-BPBP)] with an oxidant combination of H2O2 (1.0 equiv.) and NaIO4 (1.5 equiv.); it uses mild conditions and short reaction times, and it outperforms other olefin cleavage methodologies. The combination of an Fe-based catalyst, [Fe(OTf)2(mix-BPBP)], and the oxidants H2O2 and NaIO4 can discriminate between electronically different double bonds and oxidatively cleave the electron-rich bond in dienes to yield aldehydes and ketones in a regioselective manner. The reaction requires mild conditions (0-50 C) and short reaction times (70 min).

Glycerol is an attractive renewable building block for the synthesis of polyglycerols, which find application in the cosmetic and pharmaceutical industries. The selective etherification of glycerol to higher oligomers was studied in the presence of CaO colloids and the data are compared with those obtained from NaOH and CaO. The materials were prepared by dispersing CaO, CaCO3, or Ca(OH)2 onto a carbon nanofiber (CNF) support. Colloidal nanoparticles were subsequently dispensed from the CNF into the reaction mixture to give CaO colloids that have a higher activity than equimolar amounts of bulk CaO and NaOH. Optimization of the reaction conditions allowed us to obtain a product with Gardner color number

The catalytic hydrogenation of levulinic acid, a key platform molecule in many biorefinery schemes, into gamma-valerolactone is considered as one of the pivotal reactions to convert lignocellulose-based biomass into renewable fuels and chemicals. Here we report on the development of highly active, selective and stable supported metal catalysts for this reaction and on the beneficial effects of metal nano-alloying. Bimetallic random alloys of gold-palladium and ruthenium-palladium supported on titanium dioxide are prepared with a modified metal impregnation method. Gold-palladium/titanium dioxide shows a marked, similar to 27-fold increase in activity (that is, turnover frequency of 0.1 s(-1)) compared with its monometallic counterparts. Although ruthenium-palladium/titanium dioxide is not only exceptionally active (that is, turnover frequency of 0.6 s(-1)), it shows excellent, sustained selectivity to g-valerolactone (99%). The dilution and isolation of ruthenium by palladium is thought to be responsible for this superior catalytic performance. Alloying, furthermore, greatly improves the stability of both supported nano-alloy catalysts.