Search

Brown algae are multicellular organisms that have evolved independently from plants and animals. Knowledge of the mechanisms involved in their embryogenesis is available only for the Fucus, Dictyota, and Ectocarpus, which are brown algae belonging to three different orders. Here, we address the control of cell growth and cell division orientation in the embryo of Saccharina latissima, a brown alga belonging to the order Laminariales, which grows as a stack of cells through transverse cell divisions until growth is initiated along the perpendicular axis. Using laser ablation, we show that apical and basal cells have different functions in the embryogenesis of this alga, with the apical cell being involved mainly in growth and basal cells controlling the orientation of cell division by inhibiting longitudinal cell division and thereby the widening of the embryo. These functions were observed in the very early development before the embryo reached the 8-cell stage. In addition, the growth of the apical and basal regions appears to be cell-autonomous, because there was no compensation for the loss of a significant part of the embryo upon laser ablation, resulting in smaller and less elongated embryos compared with intact embryos. In contrast, the orientation of cell division in the apical region of the embryo appears to be controlled by the basal cell only, which suggests a polarised, non-cell-autonomous mechanism. Altogether, our results shed light on the early mechanisms of growth rate and growth orientation at the onset of the embryogenesis of Saccharina, in which non-cell-specific cell-autonomous and cell-specific non-cell-autonomous processes are involved. This complex control differs from the mechanisms described in the other brown algal embryos, in which the establishment of embryo polarity depends on environmental cues. [ABSTRACT FROM AUTHOR]

The European flat oyster (Ostrea edulis L.) is a native bivalve of the European coasts. Harvest of this species has declined during the last decades because of the appearance of two parasites that have led to the collapse of the stocks and the loss of the natural oyster beds. O. edulis has been the subject of numerous studies in population genetics and on the detection of the parasites Bonamia ostreae and Marteilia refringens. These studies investigated immune responses to these parasites at the molecular and cellular levels. Several genetic improvement programs have been initiated especially for parasite resistance. Within the framework of a European project (PERLE 2) that aims to produce genetic lines of O. edulis with hardiness traits (growth, survival, resistance) for the purpose of repopulating natural oyster beds in Brittany and reviving the culture of this species in the foreshore, obtaining a reference genome becomes essential as done recently in many bivalve species of aquaculture interest. Here, we present a chromosome‐level genome assembly and annotation for the European flat oyster, generated by combining PacBio, Illumina, 10X linked, and Hi‐C sequencing. The finished assembly is 887.2 Mb with a scaffold‐N50 of 97.1 Mb scaffolded on the expected 10 pseudochromosomes. Annotation of the genome revealed the presence of 35,962 protein‐coding genes. We analyzed in detail the transposable element (TE) diversity in the flat oyster genome, highlighted some specificities in tRNA and miRNA composition, and provided the first insight into the molecular response of O. edulis to M. refringens. This genome provides a reference for genomic studies on O. edulis to better understand its basic physiology and as a useful resource for genetic breeding in support of aquaculture and natural reef restoration. [ABSTRACT FROM AUTHOR]

The study explains the occurrence, classification, as well as the biological function of the hydrogenases that act like the enzyme enabling cells to use molecular hydrogen. These enzymes are present in a large number of organisms and help in their biosynthesis and activity.

Tip growth has been studied in pollen tubes, root hairs, and fungal and oomycete hyphae and is the most widely distributed unidirectional growth process on the planet. It ensures spatial colonization, nutrient predation, fertilization, and symbiosis with growth speeds of up to 800 μm h−1. Although turgor-driven growth is intuitively conceivable, a closer examination of the physical processes at work in tip growth raises a paradox: growth occurs where biophysical forces are low, because of the increase in curvature in the tip. All tip-growing cells studied so far rely on the modulation of cell wall extensibility via the polarized excretion of cell wall–loosening compounds at the tip. Here, we used a series of quantitative measurements at the cellular level and a biophysical simulation approach to show that the brown alga Ectocarpus has an original tip-growth mechanism. In this alga, the establishment of a steep gradient in cell wall thickness can compensate for the variation in tip curvature, thereby modulating wall stress within the tip cell. Bootstrap analyses support the robustness of the process, and experiments with fluorescence recovery after photobleaching (FRAP) confirmed the active vesicle trafficking in the shanks of the apical cell, as inferred from the model. In response to auxin, biophysical measurements change in agreement with the model. Although we cannot strictly exclude the involvement of a gradient in mechanical properties in Ectocarpus morphogenesis, the viscoplastic model of cell wall mechanics strongly suggests that brown algae have evolved an alternative strategy of tip growth. This strategy is largely based on the control of cell wall thickness rather than fluctuations in cell wall mechanical properties. [ABSTRACT FROM AUTHOR]

Mutagenesis is the only process by which unpredicted biological gene function can be identified. Despite that several macroalgal developmental mutants have been generated, their causal mutation was never identified, because experimental conditions were not gathered at that time. Today, progresses in macroalgal genomics and judicious choices of suitable genetic models make mutated gene identification possible. This article presents a comparative study of two methods aiming at identifying a genetic locus in the brown alga Ectocarpus siliculosus: positional cloning and Next-Generation Sequencing (NGS)-based mapping. Once necessary preliminary experimental tools were gathered, we tested both analyses on an Ectocarpus morphogenetic mutant. We show how a narrower localization results from the combination of the two methods. Advantages and drawbacks of these two approaches as well as potential transfer to other macroalgae are discussed. [ABSTRACT FROM AUTHOR]

Laser capture microdissection (LCM) facilitates the isolation of individual cells from tissue sections, and when combined with RNA amplification techniques, it is an extremely powerful tool for examining genome-wide expression profiles in specific cell-types. LCM has been widely used to address various biological questions in both animal and plant systems, however, no attempt has been made so far to transfer LCM technology to macroalgae. Macroalgae are a collection of widespread eukaryotes living in fresh and marine water. In line with the collective effort to promote molecular investigations of macroalgal biology, here we demonstrate the feasibility of using LCM and cell-specific transcriptomics to study development of the brown alga Ectocarpus siliculosus. We describe a workflow comprising cultivation and fixation of algae on glass slides, laser microdissection, and RNA amplification. To illustrate the effectiveness of the procedure, we show qPCR data and metrics obtained from cell-specific transcriptomes generated from both upright and prostrate filaments of Ectocarpus. [ABSTRACT FROM AUTHOR]

Brown algae are multicellular marine organisms evolutionarily distant from both metazoans and land plants. The molecular or cellular mechanisms that govern the developmental patterning in brown algae are poorly characterized. Here, we report the first morphogenetic mutant, étoile (etl), produced in the brown algal model Ectocarpus siliculosus. Genetic, cellular, and morphometric analyses showed that a single recessive locus, ETL , regulates cell differentiation: etl cells display thickening of the extracellular matrix (ECM), and the elongated, apical, and actively dividing E cells are underrepresented. As a result of this defect, the overrepresentation of round, branch-initiating R cells in the etl mutant leads to the rapid induction of the branching process at the expense of the uniaxial growth in the primary filament. Computational modeling allowed the simulation of the etl mutant phenotype by including a modified response to the neighborhood information in the division rules used to specify wild-type development. Microarray experiments supported the hypothesis of a defect in cell–cell communication, as primarily Lin-Notch-domain transmembrane proteins, which share similarities with metazoan Notch proteins involved in binary cell differentiation were repressed in etl. Thus, our study highlights the role of the ECM and of novel transmembrane proteins in cell–cell communication during the establishment of the developmental pattern in this brown alga. [ABSTRACT FROM AUTHOR]

The distant phylogenetic position of brown macroalgae from the other multicellular phyla offers the opportunity to study novel and alternative developmental processes involved in the establishment of multicellularity. At present, however, very little information is available about developmental patterning in this group. Ectocarpus siliculosus (Dillwyn) Lyngb. has uniseriate filaments and displays one of the simplest architectures in the Phaeophyceae. The aim of this study was to decipher the morphogenetic steps that lead to the development of the Ectocarpus sporophyte. We carried out a detailed morphometric study of the events that occurred between gamete germination and the 100-cell stage. This analysis was performed on two ecologically distant isolates to assess plasticity in developmental patterning within this species. Cell sizes were measured in both isolates, allowing the definition of two main cell types based on their shape (round and elongated). On average, the filament is composed of about 40% round cells, which are present in the central region of the filament, but different combinations of the two cell types within filaments were observed and quantified. Young sporophytes grew apically, with elongated cells progressively differentiating into round cells. Secondary filaments emerged preferentially on round cells, primarily from the older central cells. Statistical analyses showed that the pattern of branching was regulated to ensure a stereotyped architecture. This description of the developmental patterning during the growth of the E. siliculosus sporophyte will serve as a base for more detailed studies of development, in this species and in brown algae in general. [ABSTRACT FROM AUTHOR]

Early development of the filamentous brown alga Ectocarpus siliculosus(Dillwyn) Lyngbye involves two cell types that are arranged in a polymorphic, but constrained, pattern. The present study aimed to decipher the cellular processes responsible for the establishment of this pattern. Thorough observations characterised five different events of division and differentiation that occurred during the early development. The hypothesis that a local control is responsible for these processes was tested. To do so, Ectomat, a stochastic automaton in which each cell only interacts with its closest neighbour(s), was created. The probabilities for the five events were adjusted to fit to the observations. Simulations with Ectomat reconstructed most of the essential properties of the sporophyte development, in terms of cell-type proportion, relative position and growth dynamics. The whole organism properties emerged by applying local transition rules. In conclusion, no global position information system was required at this development stage. Randomly occurring cell events, driven by simple contact interactions, are sufficient to account for the early filament development and establishment of the cell-type pattern of E. siliculosus. [ABSTRACT FROM AUTHOR]

We present a new method using nucleic acid secondary structure to assess phylogenetic relationships among species. In this method, which we term “molecular morphometrics,” the measurable structural parameters of the molecules (geometrical features, bond energies, base composition, etc.) are used as specific characters to construct a phylogenetic tree. This method relies both on traditional morphological comparison and on molecular sequence comparison. Applied to the phylogenetic analysis of Cirripedia, molecular morphometrics supports the most recent morphological analyses arguing for the monophyly of Cirripedia sensu stricto (Thoracica + Rhizocephala + Acrothoracica). As a proof, a classical multiple alignment was also performed, either using or not using the structural information to realign the sequence segments considered in the molecular morphometrics analysis. These methods yielded the same tree topology as the direct use of structural characters as a phylogenetic signal. By taking into account the secondary structure of nucleic acids, the new method allows investigators to use the regions in which multiple alignments are barely reliable because of a large number of insertions and deletions. It thus appears to be complementary to classical primary sequence analysis in phylogenetic studies. [ABSTRACT FROM PUBLISHER]

In plants, cell growth is constrained by a stiff cell wall, at least this is the way textbooks usually present it. Accordingly, many studies have focused on the elasticity and plasticity of the cell wall as prerequisites for expansion during growth. With their specific evolutionary history, cell wall composition, and environment, brown algae present a unique configuration offering a new perspective on the involvement of the cell wall, viewed as an inert material yet with intrinsic mechanical properties, in growth. In light of recent findings, we explore here how much of the functional relationship between cell wall chemistry and intrinsic mechanics on the one hand, and growth on the other hand, has been uncovered in brown algae. Highlights There is a current overwhelming paradigm of cell growth that promotes one main scenario: the intrinsic elasticity or plasticity of the cell wall controls growth. In brown algae, which evolved independently from land plants and fungi, both the structure and chemical composition of the cell wall differ from their counterparts (i.e., cell wall of land plants, fungi, oomycetes, and other algae). Beyond a complete inventory of cell wall components, their proportion and potential chemical modifications and interactions (covalent and/or electrostatic) with each other are still largely unknown, even in the most studied organisms, such as land plants. Data on land plants and brown algae show that the propensity of the cell wall to grow does not systematically depend on its intrinsic mechanical properties. Complexity and diversity of cell wall compositions and structures make preconceived transposition of cell wall growth mechanisms hazardous. [ABSTRACT FROM AUTHOR]

Brown algae are multicellular photosynthetic organisms that have evolved independently of plants and other algae. Here, we have studied the determinism of body axis formation in the kelp Saccharina latissima. After microdissection of the embryo, we show that the stalk, an empty cell that retains the embryo on the maternal tissue, represses longitudinal cell divisions in the early embryo, thereby reinforcing the establishment of the initial apico-basal axis. In addition, it promotes cell growth and controls cell shape and arrangement in the flat oblong embryo composed of cells aligned in rows and columns. Although the stalk persists for several weeks until the embryo reaches at least 500 cells, proper embryogenesis requires connection to maternal tissue only during the first 4 days after fertilisation, i.e. before the embryo reaches the 8-cell stage. Transplantation experiments indicate that the maternal signal is not diffused in seawater, but requires contact between the embryo and the maternal tissue. This first global quantitative study of brown algal embryogenesis highlights the role of MUM, an unknown maternal message, in the control of growth axes and tissue patterning in kelp embryos., Competing Interests: Competing interests The authors declare no competing or financial interests., (© 2024. Published by The Company of Biologists Ltd.)

Analysis of the establishment of epithalamic asymmetry in two non-conventional model organisms, a cartilaginous fish and a lamprey, has suggested that an essential role of Nodal signalling, likely to be ancestral in vertebrates, may have been largely lost in zebrafish. In order to decipher the cellular mechanisms underlying this divergence, we have characterised neurogenetic asymmetries during habenular development in the catshark Scyliorhinus canicula and addressed the mechanism involved in this process. As in zebrafish, neuronal differentiation starts earlier on the left side in the catshark habenulae, suggesting the conservation of a temporal regulation of neurogenesis. At later stages, marked, Alk4/5/7 dependent, size asymmetries having no clear counterparts in zebrafish also develop in neural progenitor territories, with a larger size of the proliferative, pseudostratified neuroepithelium, in the right habenula relative to the left one, but a higher cell number on the left of a more lateral, later formed population of neural progenitors. These data show that mechanisms resulting in an asymmetric, preferential maintenance of neural progenitors act both in the left and the right habenulae, on different cell populations. Such mechanisms may provide a substrate for quantitative variations accounting for the variability in size and laterality of habenular asymmetries across vertebrates.

A biomechanical model is proposed for the growth of the brown alga Ectocarpus siliculosus Featuring ramified uniseriate filaments, this alga has two modes of growth: apical growth and intercalary growth with branching. Apical growth occurs upon the mitosis of a young cell at one extremity and leads to a new tip cell followed by a cylindrical cell, whereas branching mainly occurs when a cylindrical cell becomes rounded and swells, forming a spherical cell. Given the continuous interplay between cell growth and swelling, a poroelastic model combining osmotic pressure and volumetric growth is considered for the whole cell, cytoplasm and cell wall. The model recovers the morphogenetic transformations of mature cells: transformation of a cylindrical shape into spherical shape with a volumetric increase, and then lateral branching. Our simulations show that the poro-elastic model, including the Mooney-Rivlin approach for hyper-elastic materials, can correctly reproduce the observations. In particular, branching appears to be a plasticity effect due to the high level of tension created after the increase in volume of mature cells., (© 2017 The Authors.)

Epigenetic response to stress in plants involves changes in DNA methylation, histone modifications, and expression of small noncoding RNAs (sRNA). Here we present the method of analysis of differential expression of sRNA populations using DNA tiling arrays. sRNA extracted from Arabidopsis thaliana plants exposed to pathogen elicitor or control plants were reverse-transcribed into cDNAs, and subsequently hybridized after labeling to a custom-made DNA tiling array covering Arabidopsis chromosome 4. We first designed a control experiment with eight cDNA clones corresponding to sequences located on chromosome 4 and obtained robust and specific hybridization signals. Furthermore, hybridization signals along chromosome 4 were in good agreement with sRNA abundance as previously determined by massive parallel sequence signature (MPSS) in the case of untreated plants, but differed substantially after stress treatment. These results demonstrate the utility of hybridization to DNA tiling arrays to detect major changes in sRNA abundance.

Small RNA (sRNA) populations extracted from Arabidopsis plants submitted or not to biotic stress, were reverse-transcribed into cDNAs, and these were subsequently hybridized after labelling to a custom-made DNA tiling array covering Arabidopsis chromosome 4. We first designed a control experiment with eight cDNA clones corresponding to sequences located on chromosome 4 and obtained robust and specific hybridization signals. Furthermore, hybridization signals along chromosome 4 were in good agreement with sRNA abundance as previously determined by Massive Parallel Sequence Signature (MPSS) in the case of untreated plants, but differed substantially after stress treatment. These results demonstrate the utility of hybridization to DNA tiling arrays to detect major changes in small RNA populations.