Search

The non-linear analysis of hollow-core concrete slabs requires the use of advanced numerical techniques, proper constitutive models both for concrete and steel as well as particular computational skills. If prestressing, cracking, crack opening, material softening, etc. are also to be taken into account, then the computational task can far exceed the capabilities of an ordinary engineer. In order for the calculations to be carried out in a traditional design office, simplified calculation methods are needed. They should be based on the linear finite element (FE) method with a simple approach that takes into account material nonlinearities. In this paper the simplified analysis of hollow-core slabs based on the generalized nonlinear constitutive law is presented. In the proposed method a simple decomposition of the traditional iterative linear finite element analysis and the non-linear algebraic analysis of the plate cross-section is used. Through independent analysis of the plate cross-section in different deformation states, a degraded plate stiffness can be obtained, which allows for iterative update of displacements and rotations in the nodes of the FE model. Which in turn allows to update the deformation state and then correct translations and rotations in the nodes again. The results obtained from the full detailed 3D nonlinear FEM model and from the proposed approach are compared for different slab cross-sections. The obtained results from both models are consistent.

This manuscript provides an overview of the most commonly-produced bitumen roofing sheets, focusing on the types of reinforcements used for their production and the reinforcements’ effects on the durability of tensile mechanical properties of roofing sheets under thermal loads. The paper includes the analysis of working conditions of roof coverings in the mid-European transitional climate, i.e., exposed to temperatures passing through 0 °C for three seasons in a year, periodic exposure to negative temperatures reaching −15 °C and positive temperatures up to +70 °C, justifying the above-mentioned emphasis on thermal load. It draws attention to technical problems related to the cooperation of roofing sheets with roofing substrates, with particular emphasis on concrete substrates. For the purposes of the work, the analyses were carried out with regard to the assessment of the service life of roof coverings made of various reinforcements working in conditions of variable temperatures and thus exposed to the transfer of thermal movements of substrate plates. The analyses also included the impact of different coefficients of thermal expansion of the materials in contact with other materials within roof coverings on the incidence of damage to cover layers. Particular attention was paid to the conditions resulting from the production process of roofing sheets effect on the durability of roof coverings made of these materials. Additionally, there were set directions for further work to calculate the impact of stresses, arising in layers of roof coverings during their operation in changeable negative and positive temperatures, on the incidence of mechanical damage to these coverings.

The principle of sustainable development imposes an obligation on societies to manage natural resources rationally and to care for the quality of the environment, by, among other things, reducing CO2 emissions. Alternative ways of stabilising building substrates by increasing their shear strength (cu) are increasingly being sought. This paper presents how microorganisms can influence cu and thus the load-bearing capacity of building substrates. Tests were performed in a triaxial compression apparatus in three variants. The first variant of testing was carried out on cemented soil samples, which were cemented in situ. The next two series of tests were performed on reconstructed samples, i.e., natural soil and soil inoculated with a solution of Sporosarcina pasteurii bacteria. The results obtained show that carbonate cementation increases the shear strength of the soil; in addition, this biomineralization-induced cementation gives higher cu results than natural carbonate cementation.

The protection and use of historic buildings is a difficult and costly task. Most often, these objects are under conservatory protection and any interference in their structure requires appropriate consent. On the other hand, conducting construction works on historic buildings carries a high risk of their damage or even destruction. Therefore, proper prior diagnostics is an extremely important factor affecting the scope and manner of works to be conducted. The paper presents the use of 3D scanning to determine the deflection of the ceiling under the Column Hall of the historic Palace, the floor of which showed elasticity, recorded during changing service loads. After identifying the places with the greatest deflections, based on data from 3D laser scanning, test holes were made and wood samples from the ceiling were taken to perform moisture content and mycological tests. An endoscopic inspection camera was inserted into test holes, providing the basis for recognizing the structure of the ceiling, i.e. arrangement of layers as well as dimensions and spacing of ceiling beams. Strength calculations were made with the limit state method resulted in the determination of the maximum permissible service load on the ceiling. The presented course of action in diagnostics of the analysed historic building may be an example of a preliminary procedure to be taken before deciding on changes in the manner of use of historic buildings or the functionalities of their individual parts.

Wood is one of the basic building materials. It is a completely biodegradable raw industrial commodity, the resources of which, with proper forest management, are virtually inexhaustible. Additionally, its acquisition and processing does not require large inputs of fossil fuels. At the same time, forest areas which we obtain wood from neutralize the negative effects of producing and acquiring other raw materials, as one hectare of pine forest (the most popular in Poland) can absorb approx. 20–30 tons of CO2. Wood is characterised by low thermal and electrical conductivity, having simultaneously high sound insulation, which perfectly meets the requirements of the present market and its regulations. This study aimed at verifying the technical parameters of wood, i.e., its bending strength, with the use of an innovative method of the correlation between the bending strength measured along and across wood fibres. The procedure was envisaged as effective for testing the strength of beams in historic buildings, in which—due to their valuable structure—only a limited number of sample holes can be made. The aim of this experiment was to create tables and diagrams, from which, based on the correlation between the side and the head of the beam, using in situ tests and the sclerometric method, it will be possible to derive the bending strength of existing wooden beams. In the study of spruce and pine wood, a correlation between the recess from the side and the recess from the head was found, ranging from 0.64 to 0.76, with an average of 0.72 for spruce elements, and 0.66–0.84, with an average of 0.70 for pine elements. This means that when testing an element fixed in a building, measuring the parameters from the head of the beam with a Schmidt hammer (often such elements are more easily accessible, i.e., on the building facade), the obtained values should be multiplied by 0.72 for spruce elements and by 0.70 for pine elements to obtain the strength of the beam. The authors of this article indicate that the confirmation of this observation requires conducting further research on various types of wood. It should also be noted that the material collected from one batch of sawn timber had a different structure, which was proved by analysing it using SEM imaging. Modeling wood numerically is, to some extent, a simplified issue that assumes wood to be an orthotropic, homogeneous (homogeneous) material. In fact, wood is an anisotropic, very heterogeneous material. The analysis of wood (on the technical scale, construction wood) as an anisotropic material is practically impossible. Adopting wood as an isotropic material is too simplistic. Therefore, the most appropriate methods of strength testing are destructive methods, as all non-destructive methods should not be used without verifying the results with other methods. The results obtained by non-destructive testing pose great difficulties in their interpretation. Obtaining reliable results of experiments entails collecting a large number of research samples. The method described in this paper will allow for obtaining the necessary data for effective expertise assessment regarding the safety level of structural elements in historic wooden load-bearing structures, which is crucial for making conservation decisions.

Streszczenie: Biorąc pod uwagę pojęcie płynnych folii z tworzyw sztucznych, należy pomyśleć jednoskładnikowe lub dwuskładnikowe polimeryczne lub polimerowe mieszaniny bitumiczne. Płynne folie z tworzywa sztucznego muszą spełniać wymagania dotyczące izolacji hydroizolacyjnej, co oznacza na przykład: muszą chronić dach przed uszkodzeniami mechanicznymi i muszą być odporne na warunki atmosferyczne. Każdy materiał stosowany jako hydroizolacja musi posiadać certyfikat ETA (ETA-The Electronics Technicians Association). W artykule przedstawiono zalety i wady powłoki hydroizolacyjnej. Przedstawiono również zastosowanie i podział związków uszczelniających z krótkim opisem każdego z nich. Ponadto wskazano również na zjawisko poprawy estetyki dachów dzięki wprowadzeniu niektórych nowoczesnych rozwiązań, takich jak folie plastikowe.