Search

The Derbyshire Platform is a Mississippian aged flat‐topped, steep sided platform that forms the westernmost expression of the Derbyshire‐East Midlands Platform. On the south‐east platform margin, 60 km2 of Visean limestone has been dolomitised, forming two distinct bodies. One of these bodies forms along a major NW–SE trending basement fault and smaller, associated, N–S trending faults and fractures. This study uses outcrop, petrographic and geochemical analysis to better constrain the timing and mechanism for this fault‐controlled dolomitisation. Field relationships demonstrate dolomitisation was multi‐phase and initiated after the main phase of matrix pore‐occluding calcite cementation on the Derbyshire Platform and terminated prior to the main phase of mineralisation. Fluids are interpreted to have fluxed from adjacent basins, primarily along strike‐slip crustal faults that were reactivated during basin inversion at the onset of the Variscan Orogeny. Fluid supply was episodic and progressively confined to fractures as matrix porosity became occluded. The study demonstrates the complex interplay between basin kinematics, host rock permeability and timing of fluid supply through seismic valving along faults that connect the carbonate platform to basin compartments. This ultimately controlled the position of dolomite geobodies along faults and provides a record of fluid flow during the transition from thermal subsidence to post‐rift basin inversion. The findings have implications for the exploration of both minerals and hydrocarbon within dolomitised host rocks and can inform studies of fluid transfer and reaction on carbonate platforms within the burial realm. [ABSTRACT FROM AUTHOR]

Landslide susceptibility modelling in tropical climates is hindered by incomplete inventory due to rapid development and natural processes that obliterate field evidence, making validation a challenge. Susceptibility modelling was conducted in Kuala Lumpur, Malaysia using a new spatial partitioning technique for cross-validation. This involved a series of two alternating east-west linear zones, where the first zone served as the training dataset and the second zone was the test dataset, and vice versa. The results show that the susceptibility models have good compatibility with the selected landslide conditioning factors and high predictive accuracy. The model with the highest area under curve (AUC) values (SRC = 0.92, PRC = 0.90) was submitted to the City Council of Kuala Lumpur for land use planning and development control. Rainfall-induced landslides are prominent within the study area, especially during the monsoon period. An extreme rainfall event in December 2021 that triggered 122 landslides provided an opportunity to conduct retrospective validation of the model; the high predictive capability (AUC of PRC = 0.93) was reaffirmed. The findings proved that retrospective validation is vital for landslide susceptibility modelling, especially where the inventory is not of the best quality. This is to encourage wider usage and acceptance among end users, especially decision-makers in cities, to support disaster risk management in a changing climate. [ABSTRACT FROM AUTHOR]

The systematic study of a brachiopod fauna collected from a Brigantian, uppermost Visean, Mississippian, mud mound complex on the Derbyshire Carbonate Platform (England, United Kingdom) recognises 45 species, representing 36 genera and seven orders (Productida, Orthotetida, Orthida, Rhynchonellida, Spiriferida, Spiriferinida, and Terebratulida). The mound complex is a decametre-scale lens-shaped buildup composed of three facies associations: the basal tabular unit made of skeletal packstone beds and tabular mounds, the complex core formed by metre-scale lens-shaped massive mounds and the surrounding inclined skeletal packstone flank beds. Brachiopods are widespread and very abundant in all three facies associations. Spinose, concavo-convex productides are dominant in the mud mound fauna, both in terms of the number of specimens, species, and biovolume. Productide success is related to scattered and scarce food resources, which they better exploited using their simple, unsupported feeding apparatus in comparison with that of the spiriferides. Spiriferides with a wide interarea are common and large in the basal tabular unit, but are rare and small in the complex core, probably due to greater availability of food resources during the deposition of the basal unit. Substrate type also played a role in controlling brachiopod diversity: varied substrates in the mound complex core allowed small-sized pedicle-attached rhynchonellides, spiriferides, and terebratulides to extensively colonise the seafloor, whereas they are rare in the basal unit. [ABSTRACT FROM AUTHOR]

The species of the brachiopod Gigantoproductus are giants within the Palaeozoic sedentary benthos. This presents a dilemma as living brachiopods have low‐energy lifestyles. Although brachiopod metabolic rates were probably higher during the Palaeozoic than today, the massive size reached by species of Gigantoproductus is nevertheless unusual. By examining the diet of Gigantoproductus species from the Visean (Mississippian, Carboniferous) of Derbyshire (UK), we seek to understand the mechanisms that enabled those low‐metabolism brachiopod species to become giants. Were they suspension feeders, similar to all other brachiopods, or did endosymbiosis provide a lifestyle that allowed them to have higher metabolic rates and become giants? We suggest that the answer to this conundrum may be solved by the identification of the biogeochemical signatures of symbionts, through combined analyses of the carbon and nitrogen‐isotopic compositions of the occluded organic matrix within their calcite shells. The shells are formed of substructured columnar units that are remarkably long and a few hundreds of microns wide, deemed to be mostly pristine based on multiple analyses (petrography, cathodoluminescence (CL), scanning electron microscopy (SEM), electron backscatter diffraction (EBSD), transmission electron microscopy (TEM)); they contain occluded organic fractions detected by TEM, nuclear magnetic resonance (NMR) and gas chromatography mass spectrometry (GC‐MS) analyses. We conclude that the gigantic size reached by the species of Gigantoproductus is probably the result of a mixotroph lifestyle, by which they could rely on the energy and nutrients derived both from photosymbiotic microbes and from filtered particulate food. [ABSTRACT FROM AUTHOR]

Satellite Interferometric Synthetic Aperture Radar (InSAR), geological data and Small Unmanned Aerial Vehicle (SUAV) surveying was used to enhance our understanding of ground movement at five areas of interest in Northern Ireland. In total 68 ERS-1/2 images 1992-2000 were processed with the Small Baseline Subset (SBAS) InSAR technique to derive the baseline ground instability scenario of key areas of interest for five stakeholders: TransportNI, Northern Ireland Railways, Department for the Economy, Arup, and Belfast City Council. These stakeholders require monitoring of ground deformation across either their geotechnical infrastructure (i.e., embankments, cuttings, engineered fills and earth retaining structures) or assessment of subsidence risk as a result of abandoned mine workings, using the most efficient, cost-effective methods, with a view to minimising and managing risk to their businesses. The InSAR results provided an overview of the extent and magnitude of ground deformation for a 3000 km² region, including the key sites of the disused salt mines in Carrickfergus, the Belfast-Bangor railway line, Throne Bend and Ligoniel Park in Belfast, Straidkilly and Garron Point along the Antrim Coast Road, plus other urbanised areas in and around Belfast. Tailored SUAV campaigns with a X8 airframe and generation of very high resolution ortho-photographs and a 3D surface model via the Structure from Motion (SfM) approach at Maiden Mount salt mine collapse in Carrickfergus in 2016 and 2017 also demonstrate the benefits of very high resolution surveying technologies to detect localised deformation and indicators of ground instability. [ABSTRACT FROM AUTHOR]

Abstract: In this study we investigated the sulphidic mine tailings from Frongoch and Grogwynion, two abandoned lead zinc mines in mid-Wales, UK. Despite falling within the same ore field the mine waste characterisation has identified differences in the tailings from the two sites. Bulk concentrations range from 10 to 52 g kg−1 for Pb, 1.1 to 2.9 g kg−1 for Zn in Grogwynion and from 1.0 to 130 g kg−1 for Pb, 11 to 110 g kg−1 for Zn in Frongoch. An experimental (European standard leaching tests TS 14429 and TS 14405) and geochemical modelling approach was used to study the leaching composition as a function of pH and liquid/solid ratio. There was little correlation between the tailings bulk metal concentrations and the leachate composition, but variations in Pb and Zn concentrations were found to be consistent with control of dissolved Pb and Zn by secondary minerals and the mechanisms of dissolution/precipitation/sorption involving them. Specifically, the Grogwynion mine tailings with near-neutral pH have predominantly lead and zinc carbonates controlling Pb and Zn solubility in the leachates, whereas the Pb and Zn concentrations in Frongoch leachates are best modelled with a surface complexation model for metal sorption to oxyhydroxides. The different speciation results in a greater sensitivity of Grogwynion tailings to acidification with a potential release of Pb in solution up to 10 times higher than in Frongoch, despite similar bulk Pb concentrations. At acid pH, Zn is similarly dissolved to a greater extent in Grogwynion than in Frongoch tailings. There was no evidence of sulphide oxidation during the batch and column leaching tests and the suitability of using these European leaching standards for the characterisation of sulphidic mine waste materials for waste management purposes has been considered. [Copyright &y& Elsevier]