Search

Spectropolarimetric reconstructions of the photospheric vector magnetic field are intrinsically limited by the 180$^\circ$-ambiguity in the orientation of the transverse component. So far, the removal of such an ambiguity has required assumptions about the properties of the photospheric field, which makes disambiguation methods model-dependent. The basic idea is that the unambiguous line-of-sight component of the field measured from one vantage point will generally have a non-zero projection on the ambiguous transverse component measured by the second telescope, thereby determining the ``true'' orientation of the transverse field. Such an idea was developed and implemented in the Stereoscopic Disambiguation Method (SDM), which was recently tested using numerical simulations. In this work we present a first application of the SDM to data obtained by the High Resolution Telescope (HRT) onboard Solar Orbiter during the March 2022 campaign, when the angle with Earth was 27 degrees. The method is successfully applied to remove the ambiguity in the transverse component of the vector magnetogram solely using observations (from HRT and from the Helioseismic and Magnetic Imager), for the first time. The SDM is proven to provide observation-only disambiguated vector magnetograms that are spatially homogeneous and consistent. A discussion about the sources of error that may limit the accuracy of the method, and of the strategies to remove them in future applications, is also presented., 32 pages, 12 figures, accepted in A&A on 09/07/2023

The Solar Orbiter mission completed its first remote-sensing observation windows in the spring of 2022. On 2/4/2022, an M-class flare followed by a filament eruption was seen both by the instruments on board the mission and from several observatories in Earth's orbit. The complexity of the observed features is compared with the predictions given by the standard flare model in 3D. We use the observations from a multi-view dataset, which includes EUV imaging to spectroscopy and magnetic field measurements. These data come from IRIS, SDO, Hinode, as well as several instruments on Solar Orbiter. Information given by SDO/HMI and Solar Orbiter PHI/HRT shows that a parasitic polarity emerging underneath the filament is responsible for bringing the flux rope to an unstable state. As the flux rope erupts, Hinode/EIS captures blue-shifted emission in the transition region and coronal lines in the northern leg of the flux rope prior to the flare peak. Solar Orbiter SPICE captures the whole region, complementing the Doppler diagnostics of the filament eruption. Analyses of the formation and evolution of a complex set of flare ribbons and loops show that the parasitic emerging bipole plays an important role in the evolution of the flaring region. While the analysed data are overall consistent with the standard flare model, the present particular magnetic configuration shows that surrounding magnetic activity such as nearby emergence needs to be taken into account to fully understand the processes at work. This filament eruption is the first to be covered from different angles by spectroscopic instruments, and provides an unprecedented diagnostic of the multi-thermal structures present before and during the flare. This dataset of an eruptive event showcases the capabilities of coordinated observations with the Solar Orbiter mission., Accepted for publication in the Astronomy & Astrophysics special edition "Solar Orbiter First Results (Nominal Mission Phase)" (23/05/2023)

Earth-side observations of solar p modes can be used to image and monitor magnetic activity on the Sun's far side. Here we use magnetograms of the far side obtained by the Polarimetric and Helioseismic Imager (PHI) onboard Solar Orbiter (SO) to directly assess -- for the first time -- the validity of far-side helioseismic holography. We wish to co-locate the positions of active regions in helioseismic images and magnetograms, and to calibrate the helioseismic measurements in terms of magnetic field strength. We identify three magnetograms on 18 November 2020, 3 October 2021, and 3 February 2022 displaying a total of six active regions on the far side. The first two dates are from SO's cruise phase, the third from the beginning of the nominal operation phase. We compute contemporaneous seismic phase maps for these three dates using helioseismic holography applied to time series of Dopplergrams from the Helioseismic and Magnetic Imager (HMI) on the Solar Dynamics Observatory (SDO). Among the six active regions seen in SO/PHI magnetograms, five active regions are identified on the seismic maps at almost the same positions as on the magnetograms. One region is too weak to be detected above the seismic noise. To calibrate the seismic maps, we fit a linear relationship between the seismic phase shifts and the unsigned line-of-sight magnetic field averaged over the active region areas extracted from the SO/PHI magnetograms. SO/PHI provides the strongest evidence so far that helioseismic imaging provides reliable information about active regions on the far side, including their positions, areas, and mean unsigned magnetic field., 10 pages, 9 figures

In November 2021, Solar Orbiter started its nominal mission phase. The remote-sensing instruments on board the spacecraft acquired scientific data during three observing windows surrounding the perihelion of the first orbit of this phase. The aim of the analysis is the detection of magnetohydrodynamic (MHD) wave modes in an active region by exploiting the capabilities of spectropolarimetric measurements. The High Resolution Telescope (HRT) of the Polarimetric and Helioseismic Imager (SO/PHI) on board the Solar Orbiter acquired a high-cadence data set of an active region. This is studied in the paper. B-$\omega$ and phase-difference analyses are applied on line-of-sight velocity and circular polarization maps and other averaged quantities. We find that several MHD modes at different frequencies are excited in all analysed structures. The leading sunspot shows a linear dependence of the phase lag on the angle between the magnetic field and the line of sight of the observer in its penumbra. The magnetic pore exhibits global resonances at several frequencies, which are also excited by different wave modes. The SO/PHI measurements clearly confirm the presence of magnetic and velocity oscillations that are compatible with one or more MHD wave modes in pores and a sunspot. Improvements in modelling are still necessary to interpret the relation between the fluctuations of different diagnostics.

Context. The Extreme Ultraviolet Imager (EUI), onboard Solar Orbiter consists of three telescopes: the two High Resolution Imagers in EUV (HRIEUV) and in Lyman-{\alpha} (HRILya), and the Full Sun Imager (FSI). Solar Orbiter/EUI started its Nominal Mission Phase on 2021 November 27. Aims. EUI images from the largest scales in the extended corona off limb, down to the smallest features at the base of the corona and chromosphere. EUI is therefore a key instrument for the connection science that is at the heart of the Solar Orbiter mission science goals. Methods. The highest resolution on the Sun is achieved when Solar Orbiter passes through the perihelion part of its orbit. On 2022 March 26, Solar Orbiter reached for the first time a distance to the Sun close to 0.3 au. No other coronal EUV imager has been this close to the Sun. Results. We review the EUI data sets obtained during the period 2022 March-April, when Solar Orbiter quickly moved from alignment with the Earth (2022 March 6), to perihelion (2022 March 26), to quadrature with the Earth (2022 March 29). We highlight the first observational results in these unique data sets and we report on the in-flight instrument performance. Conclusions. EUI has obtained the highest resolution images ever of the solar corona in the quiet Sun and polar coronal holes. Several active regions were imaged at unprecedented cadences and sequence durations. We identify in this paper a broad range of features that require deeper studies. Both FSI and HRIEUV operate at design specifications but HRILya suffered from performance issues near perihelion. We conclude emphasising the EUI open data policy and encouraging further detailed analysis of the events highlighted in this paper.

International audience; Solar Orbiter is the first space mission observing the solar plasma both in situ and remotely, from a close distance, in and out of the ecliptic. The ultimate goal is to understand how the Sun produces and controls the heliosphere, filling the Solar System and driving the planetary environments. With six remote-sensing and four in-situ instrument suites, the coordination and planning of the operations are essential to address the following four top-level science questions: (1) What drives the solar wind and where does the coronal magnetic field originate?; (2) How do solar transients drive heliospheric variability?; (3) How do solar eruptions produce energetic particle radiation that fills the heliosphere?; (4) How does the solar dynamo work and drive connections between the Sun and the heliosphere? Maximising the mission's science return requires considering the characteristics of each orbit, including the relative position of the spacecraft to Earth (affecting downlink rates), trajectory events (such as gravitational assist manoeuvres), and the phase of the solar activity cycle. Furthermore, since each orbit's science telemetry will be downloaded over the course of the following orbit, science operations must be planned at mission level, rather than at the level of individual orbits. It is important to explore the way in which those science questions are translated into an actual plan of observations that fits into the mission, thus ensuring that no opportunities are missed. First, the overarching goals are broken down into specific, answerable questions along with the required observations and the so-called Science Activity Plan (SAP) is developed to achieve this. The SAP groups objectives that require similar observations into Solar Orbiter Observing Plans, resulting in a strategic, top-level view of the optimal opportunities for science observations during the mission lifetime. This allows for all four mission goals to be addressed. In this paper, we introduce Solar Orbiter's SAP through a series of examples and the strategy being followed.

International audience; Aims. The Spectral Imaging of the Coronal Environment (SPICE) instrument is a high-resolution imaging spectrometer operating at extreme ultraviolet (EUV) wavelengths. In this paper, we present the concept, design, and pre-launch performance of this facility instrument on the ESA/NASA Solar Orbiter mission. Methods. The goal of this paper is to give prospective users a better understanding of the possible types of observations, the data acquisition, and the sources that contribute to the instrument's signal. Results. The paper discusses the science objectives, with a focus on the SPICE-specific aspects, before presenting the instrument's design, including optical, mechanical, thermal, and electronics aspects. This is followed by a characterisation and calibration of the instrument's performance. The paper concludes with descriptions of the operations concept and data processing. Conclusions. The performance measurements of the various instrument parameters meet the requirements derived from the mission's science objectives. The SPICE instrument is ready to perform measurements that will provide vital contributions to the scientific success of the Solar Orbiter mission.

International audience; Context. The recent claims of g-mode detection have restarted the search for these potentially extremely important modes. The claimed detection of g modes was obtained from the analysis of the power spectrum of the time series of round-trip travel time of p modes. Aims. The goal of this paper is to reproduce these results on which the claims are based for confirming or invalidating the detection of g modes with the method used to make the claims. Methods. We computed the time series of round-trip travel time using the procedure given in Fossat et al. (2017, A&A, 604, A40), and used different variations of the times series for comparison. We used the recently calibrated GOLF data (published in Paper I) with different sampling, different photomultipliers, different length of data for reproducing the analysis. We also correlated the power spectrum with an asymptotic model of g-mode frequencies in a similar manner to Fossat and Schmider (2018, A&A, 612, L1). We devised a scheme for optimising the correlation both for pure noise and for the GOLF data. Results. We confirm the analysis performed in Fossat et al. (2017) but draw different conclusions. Their claims of detection of g modes cannot be confirmed when changing parameters such as sampling interval, length of time series, or photomultipliers. Other instrument such as GONG and BiSON do not confirm their detection. We also confirm the analysis performed in Fossat and Schmider (2018), but again draw different conclusions. For GOLF, the correlation of the power spectrum with the asymptotic model of g-mode frequencies for l = 1 and l = 2 show a high correlation at lag=0 and at lag corresponding to the rotational splitting ν l , but the same occurs for pure noise due to the large number of peaks present in the model. In addition, other very different parameters defining the asymptotic model also provide a high correlation at these lags. We conclude that the detection performed in Fossat and Schmider (2018) is an artefact of the methodology.

We present the discovery of HD 221416 b, the first transiting planet identified by the Transiting Exoplanet Survey Satellite (TESS) for which asteroseismology of the host star is possible. HD 221416 b (HIP 116158, TOI-197) is a bright (V = 8.2 mag), spectroscopically classified subgiant that oscillates with an average frequency of about 430 μHz and displays a clear signature of mixed modes. The oscillation amplitude confirms that the redder TESS bandpass compared to Kepler has a small effect on the oscillations, supporting the expected yield of thousands of solar-like oscillators with TESS 2 minute cadence observations. Asteroseismic modeling yields a robust determination of the host star radius (R∗ = 2.943 ± 0.064 Ro), mass (M∗ = 1.212 ± 0.074 Mo), and age (4.9 ± 1.1 Gyr), and demonstrates that it has just started ascending the red-giant branch. Combining asteroseismology with transit modeling and radial-velocity observations, we show that the planet is a "hot Saturn" (Rp = 9.17 ± 0.33 R⊕) with an orbital period of ∼14.3 days, irradiance of F = 343 ± 24 F⊕, and moderate mass (Mp = 60.5 ± 5.7 M⊕) and density (ρp = 0.431 ± 0.062 g cm-3). The properties of HD 221416 b show that the host-star metallicity-planet mass correlation found in sub-Saturns (4-8 R⊕) does not extend to larger radii, indicating that planets in the transition between sub-Saturns and Jupiters follow a relatively narrow range of densities. With a density measured to ∼15%, HD 221416 b is one of the best characterized Saturn-size planets to date, augmenting the small number of known transiting planets around evolved stars and demonstrating the power of TESS to characterize exoplanets and their host stars using asteroseismology. © 2019. The American Astronomical Society. All rights reserved..

International audience; Context. The recent claims of g-mode detection have restarted the search for these potentially extremely important modes. These claims can be reassessed in view of the different data sets available from the SoHO instruments and ground-based instruments. Aims. We produce a new calibration of the GOLF data with a more consistent p-mode amplitude and a more consistent time shift correction compared to the time series used in the past. Methods. The calibration of 22 yr of GOLF data is done with a simpler approach that uses only the predictive radial velocity of the SoHO spacecraft as a reference. Using p modes, we measure and correct the time shift between ground-and space-based instruments and the GOLF instrument. Results. The p-mode velocity calibration is now consistent to within a few percent with other instruments. The remaining time shifts are within ±5 s for 99.8% of the time series.

We lack a reliable scenario for the formation and evolution of stars and their planetary systems, involving key factors such as magnetic fields and turbulence. We present the case for a mission concept that will clarify these problems and give us a global view of the evolution of combined star and planetary systems. This will be achieved by simultaneously addressing the search for planetary transits in front of a large number of stars, including many nearby stars, the study of their internal structure and evolution via asteroseismology, and that of their magnetic activity, via UV monitoring.

Context. Solar-like oscillations have been observed by Kepler and CoRoT in many solar-type stars, thereby providing a way to probe stars using asteroseismology. Aims. The derivation of stellar parameters has usually been done with single stars. The aim of the paper is to derive the stellar parameters of a double-star system (HIP 93511), for which an interferometric orbit has been observed along with asteroseismic measurements. Methods. We used a time series of nearly two years of data for the double star to detect the two oscillation-mode envelopes that appear in the power spectrum. Using a new scaling relation based on luminosity, we derived the radius and mass of each star. We derived the age of each star using two proxies: one based upon the large frequency separation and a new one based upon the small frequency separation. Using stellar modelling, the mode frequencies allowed us to derive the radius, the mass, and the age of each component. In addition, speckle interferometry performed since 2006 has enabled us to recover the orbit of the system and the total mass of the system. Results. From the determination of the orbit, the total mass of the system is 2.34_(-0.33)^(+0.45) M_⊙. The total seismic mass using scaling relations is 2.47 ± 0.07 M_⊙. The seismic age derived using the new proxy based upon the small frequency separation is 3.5 ± 0.3 Gyr. Based on stellar modelling, the mean common age of the system is 2.7–3.9 Gyr. The mean total seismic mass of the system is 2.34–2.53 M_⊙ consistent with what we determined independently with the orbit. The stellar models provide the mean radius, mass, and age of the stars as R_A = 1.82−1.87R_⊙, M_A = 1.25−1.39 M_⊙, Age_A = 2.6–3.5 Gyr; R_B = 1.22−1.25 R_⊙, M_B = 1.08−1.14 M_⊙, Age_B = 3.35–4.21 Gyr. The models provide two sets of values for Star A: [1.25–1.27] M_⊙ and [1.34–1.39] M_⊙. We detect a convective core in Star A, while Star B does not have any. For the metallicity of the binary system of Z ≈ 0.02, we set the limit between stars having a convective core in the range [1.14–1.25] M_⊙.

We present the first detections by the NASA K2 Mission of oscillations in solar-type stars, using short-cadence data collected during K2 Campaign\,1 (C1). We understand the asteroseismic detection thresholds for C1-like levels of photometric performance, and we can detect oscillations in subgiants having dominant oscillation frequencies around $1000\,\rm \mu Hz$. Changes to the operation of the fine-guidance sensors are expected to give significant improvements in the high-frequency performance from C3 onwards. A reduction in the excess high-frequency noise by a factor of two-and-a-half in amplitude would bring main-sequence stars with dominant oscillation frequencies as high as ${\simeq 2500}\,\rm \mu Hz$ into play as potential asteroseismic targets for K2., Comment: Accepted for publication in PASP; 16 pages, 2 figures

International audience

International audience; We present a detailed spectroscopic study of 93 solar-type stars that are targets of the NASA/Kepler mission and provide detailed chemical composition of each target. We find that the overall metallicity is well represented by Fe lines. Relative abundances of light elements (CNO) and a elements are generally higher for low-metallicity stars. Our spectroscopic analysis benefits from the accurately measured surface gravity from the asteroseismic analysis of the Kepler light curves. The accuracy on the log g parameter is better than 0.03 dex and is held fixed in the analysis. We compare our Teff determination with a recent colour calibration of VT-KS [TYCHO V magnitude minus Two Micron All Sky Survey (2MASS) KS magnitude] and find very good agreement and a scatter of only 80 K, showing that for other nearby Kepler targets, this index can be used. The asteroseismic log g values agree very well with the classical determination using Fe iFe ii balance, although we find a small systematic offset of 0.08 dex (asteroseismic log g values are lower). The abundance patterns of metals, a elements and the light elements (CNO) show that a simple scaling by [Fe/H] is adequate to represent the metallicity of the stars, except for the stars with metallicity below -0.3, where a-enhancement becomes important. However, this is only important for a very small fraction of the Kepler sample. We therefore recommend that a simple scaling with [Fe/H] be employed in the asteroseismic analyses of large ensembles of solar-type stars.

International audience

Having started science operations in May 2009, the Kepler photometer has been able to provide exquisite data of solar-like stars. Five out of the 42 stars observed continuously during the survey phase show evidence of oscillations, even though they are rather faint (magnitudes from 10.5 to 12). In this paper, we present an overview of the results of the seismic analysis of 4 of these stars observed during more than eight months.

The Kepler mission is providing photometric data of exquisite quality for the asteroseismic study of different classes of pulsating stars. These analyses place particular demands on the pre-processing of the data, over a range of time-scales from minutes to months. Here, we describe processing procedures developed by the Kepler Asteroseismic Science Consortium to prepare light curves that are optimized for the asteroseismic study of solar-like oscillating stars in which outliers, jumps and drifts are corrected.

From the seismic data obtained by CoRoT for the star HD 49933 it is possible, as for the Sun, to constrain models of the excitation of acoustic modes by turbulent convection. We compare a stochastic excitation model described in Paper I (arXiv:0910.4027) with the asteroseismology data for HD 49933, a star that is rather metal poor and significantly hotter than the Sun. Using the mode linewidths measured by CoRoT for HD 49933 and the theoretical mode excitation rates computed in Paper I, we derive the expected surface velocity amplitudes of the acoustic modes detected in HD 49933. Using a calibrated quasi-adiabatic approximation relating the mode amplitudes in intensity to those in velocity, we derive the expected values of the mode amplitude in intensity. Our amplitude calculations are within 1-sigma error bars of the mode surface velocity spectrum derived with the HARPS spectrograph. The same is found with the mode amplitudes in intensity derived for HD 49933 from the CoRoT data. On the other hand, at high frequency, our calculations significantly depart from the CoRoT and HARPS measurements. We show that assuming a solar metal abundance rather than the actual metal abundance of the star would result in a larger discrepancy with the seismic data. Furthermore, calculations that assume the ``new'' solar chemical mixture are in better agreement with the seismic data than those that assume the ``old'' solar chemical mixture. These results validate, in the case of a star significantly hotter than the Sun and Alpha Cen A, the main assumptions in the model of stochastic excitation. However, the discrepancies seen at high frequency highlight some deficiencies of the modelling, whose origin remains to be understood., 8 pages, 3 figures (B-W and color), accepted for publication in Astronomy & Astrophysics. Corrected typo in Eq. (4). Updated references. Language improvements

International audience

Simulating the data that a space instrument like COROT will provide might look presomptuous. Indeed, it is certainly, when comparing to previous comparable instruments like IPHIR or GOLF. These two examples show that the nominal behaviour of the instrument is not always reached, but this does not prevent this instrument to provide very interesting data. However, despite some technical problems, IPHIR and GOLF yielded a wealth of scientific results. Thus, what is the interest of simulating COROT data? How close to reality these simualtions will get? This might not be the most important fact as the preparation of these simulations will help us to prepare the analysis of real data and to be ready in case of unexpected technical behaviour of the instrument perturbating the data, or unexpected physical behaviour of the targets of the instrument. A consequence of that is that the simulation tool must include technical and physical aspects, making the task even more difficult. These aspects cover: photon noise, p modes excitation, granulation signal, stellar activity signal, orbital perturbations, stellar rotation... The software presented here is freely available at: http://www.lesia.obspm.fr/~corotswg/simulightcurve.html, Contribution to "The Corot book" published by ESA (SP 1306; Eds: M. Fridlund, A. Baglin, L. Conroy and J. Lochard). Due to a mistake, the references were not correctly compiled, this version corrects this mistake ; 5 pages ; 3 figures

This paper presents the conclusions of the working group for stellar physics observations at the Dome-C station in Antarctica. It summarizes the advantages of Dome-C for asteroseismology and stellar activity, identifies strategies and possible instrumental projects to be conducted there, and concludes with recommendations for the development of stellar observations. The conclusions are based on the fact that continuous observations over several weeks or months without breaks due to the diurnal cycle are fundamental for programs of stellar physics and especially for asteroseismology and stellar activity. Therefore, Dome-C appears to be a unique ground-based site offering ideal conditions for continuous observations.

Proceedings of the SOHO 14 / GONG 2004 Workshop (ESA SP-559). "Helio- and Asteroseismology: Towards a Golden Future, ed. D. Danesy., n/a, p. 356 (2004); International audience