Search

Advanced functional materials 2020, 1910503 - (2020). doi:10.1002/adfm.201910503, In the realm of colloidal nanostructures, with their immense capacity for shape and dimensionality control, the form is undoubtedly a driving factor for the tunability of optical and electrical properties in semiconducting or metallic materials. However, influencing the fundamental properties is still challenging and requires sophisticated surface or dimensionality manipulation. Such a modification is presented for the example of colloidal lead‐sulfide nanowires. It is shown that the electrical properties of lead sulfide nanostructures can be altered from semiconducting to metallic with indications of superconductivity, by exploiting the flexibility of the colloidal synthesis to sculpt the crystal and to form different surface facets. A particular morphology of lead sulfide nanowires is prepared through the formation of {111} surface facets, which shows metallic and superconducting properties in contrast to other forms of this semiconducting crystal, which contain other surface facets ({100} and {110}). This effect, which is investigated with several experimental and theoretical approaches, is attributed to the presence of lead‐rich {111} facets. The insights promote new strategies for tuning the properties of crystals and new applications for lead sulfide nanostructures., Published by Wiley-VCH, Weinheim

The fluorescence quantum yield (QY) of CdSe dot/CdS rod (DR) nanoparticle ensembles is dependent on the Shell growth and excitation wavelength. We analyze the origin of this dependency by comparing the optical properties of DR ensembles to the results obtained in single-particle experiments. On the Ensemble level, we find that the QY of DRs with shell lengths shorter than 40 nm exhibits no dependence on the excitation wavelength, whereas for DRs with shell lengths longer than 50 nm, the QY significantly decreases for excitation above the CdS band gap. Upon excitation in the CdSe core, the ensemble QY, the fluorescence wavelength, and the fluorescence blinking behavior of individual particles are only dependent on the radial CdS shell thickness and not on the CDs shell length. If the photogenerated excitons can reach the CdSe core region, the fluorescence properties will be dependent only on the surface passivation in close vicinity to the CdSe core. The change in QY upon excitation above the band gap of CdS for longer DRs cannot be explained by nonradiative particles because the ratio of emitting DRs is found to be independent of the DR length. We propose a model after which the decrease in QY for longer CdS shells is due to an increasing fraction of nonradiative exciton recombination within the elongated shell. This is supported by an effective-mass-approximation-based calculation, which suggests an optimum length of DRs of about 40 nm, to combine the benefit of high CdS absorption cross section with a high fluorescence QY.

Herein, we demonstrate that meticulous and in-depth analysis of the reaction mechanisms of nanoparticle formation is rewarded by full control of the size, shape, and crystal structure of superparamagnetic iron oxide nanocrystals during synthesis. Starting from two iron sources, iron(II) and iron(III) carbonate, a strict separation of oleate formation from the generation of reactive pyrolysis products and concomitant nucleation of iron oxide nanoparticles was achieved. This protocol enabled us to analyze each step of nanoparticle formation independently in depth. The progress of the entire reaction was monitored via matrix-assisted laser desorption ionization time-of-flight mass spectrometry and gas chromatography, thus providing insight into the formation of various iron oleate species prior to nucleation. Interestingly, due to the intrinsic strongly reductive pyrolysis conditions of the oleate intermediates and redox process in early stages of the synthesis, pristine iron oxide nuclei were composed exclusively from wüstite irrespective of the oxidation state of the iron source. Controlling the reaction conditions provided a very broad range of size- and shape-defined monodispersed iron oxide nanoparticles. Curiously, after nucleation, star-shaped nanocrystals were obtained that underwent metamorphism toward cubic-shaped particles. Electron energy loss spectroscopy tomography revealed ex post oxidation of the primary wustite nanocrystal, providing a full 3D image of Fe2+ and Fe3+ distribution within. Overall, we developed a highly flexible synthesis, yielding multi-gram amounts of well-defined iron oxide nanocrystals of different sizes and morphologies.

We investigate the photoluminescence behavior of individual CdSe nanocrystals attached to silica-coated Au nanoparticles. These hybrid nanostructures show enhanced photoluminescence intensity, suppressed off-states, as well as shorter lifetimes in comparison with the isolated CdSe nanocrystals. The very same investigated hybrid nanostructures are further relocated by transmission electron microscopy to study the corresponding structures and geometries. Correlating the optical and structural properties of the hybrid nanostructures, we find that the lifetime shortening of the CdSe nanocrystals depends on the distance between the CdSe nanocrystals and the Au nanoparticles. The results are compared with theoretical calculations based on the FDTD method and the Gersten–Nitzan model.

The formation of monodisperse, tunable sized, alloyed nanoparticles of Ni, Co, or Fe with Pt and pure Pt nanoparticles attached to carbon nanotubes has been investigated. Following homogeneous nucleation, nanoparticles attach directly to non-functionalized singlewall and multiwall carbon nanotubes during nanoparticle synthesis as a function of ligand nature and the nanoparticle work function. These ligands do not only provide a way to tune the chemical composition, size and shape of the nanoparticles but also control a strong reversible interaction with carbon nanotubes and permit controlling the nanoparticle coverage. Raman spectroscopy reveals that the sp2 hybridization of the carbon lattice is not modified by the attachment. In order to better understand the interaction between the directly attached nanoparticles and the non-functionalized carbon nanotubes we employed first-principles calculations on model systems of small Pt clusters and both zig-zag and armchair singlewall carbon nanotubes. The detailed comprehension of such systems is of major importance since they find applications in catalysis and energy storage., 8 pages, 6 figures, 1 table

The reaction of lithium tetrahydridoborate and iron bromide in high boiling ether as reaction medium produces an ultrafine, pyrophoric and magnetic precipitate. X-ray and electron diffraction proved the product to be amorphous. According to X-ray absorption fine structure spectroscopy (XAFS) the precipitate has FeB structure up to nearly two coordination spheres around an iron absorber atom. Transmission electron microscopy (TEM) confirms the ultrafine powder to be nanoscale. Subsequent annealing at 450 °C causes the atoms to arrange in a more distinct FeB structure, and further thermal treatment to 1050 °C extends the local structure to the α-modification of FeB. Between 1050 °C and 1500 °C α-FeB is transformed into β-FeB.

We report the growth of an unstable shell-like gold structure around dihexagonal pyramidal CdSe nanocrystals in organic solution and the structural transformation to spherical domains by two means: i) electron beam irradiation (in situ) and (ii) addition of a strong reducing agent during synthesis. By varying the conditions of gold deposition, such as ligands present or the geometry of the CdSe nanocrystals, we were able to tune the gold domain size between 1.4 nm to 3.9 nm and gain important information on the role of surface chemistry in hetero nanoparticle synthesis and seed reactivity, both of which are crucial points regarding the chemical design of new materials for photocatalysis and optoelectronic applications., 5 pages, 4 figures

Controlling anisotropy is a key concept to generate complex functionality in advanced materials. For this, oriented attachment of nanocrystal building blocks, a self assembly of particles into larger single crystalline objects, is one of the most promising approaches in nanotechnology. We report here the 2D oriented attachment of PbS nanocrystals into ultra-thin single crystal sheets with dimensions on the micrometer scale. We found that this process is initiated by co-solvents which alter nucleation and growth rates during the primary nanocrystal formation and finally driven by dense packing of oleic acid ligands on {100} facets of PbS. The obtained nanosheets can be readily integrated in a photo-detector device without further treatment., 5 pages, 5 figures

We demonstrate the controlled growth of high aspect ratio anatase TiO2 nanorods by hydrolysis of titanium tetraisopropoxide (TTIP) in oleic acid (OLEA) as surfactant at a temperature as low as 80 degrees C. Chemical modification of TTIP by OLEA is proven to be a rational strategy to tune the reactivity of the precursor toward water. The most influential factors in shape control of the nanoparticles are investigated by simply manipulating their growth kinetics. The presence of tertiary amines or quaternary ammonium hydroxides as catalysts is essential to promote fast crystallization under mild conditions. The novelty of the present approach relies on the large-scale production of organic-capped TiO2 nanocrystals to which standard processing of colloidal nanocrystals, such as surface ligand exchange, can be applied for the first time. Concentrated colloidal titania dispersions can be prepared for a number of fundamental studies in homogeneous solutions and represent a new source of easily processable oxide material for many technological applications.