Search

Sequencing and scheduling are the forms of decision-making approach that play a vital role in the automation and services industries. Efficient scheduling can help the industries to achieve the full potential of their supply chains. Conversely, inefficient scheduling causes additional idle time for machines and reduces productivity, which may escalate the product price. This study aims to find the most effective algorithm for solving sequencing and scheduling problems in a non-preemptive flow shop environment where the objective functions are to reduce the total elapsed time and idle time. In this research, four prominent exact algorithms are considered and examined their efficiency by calculating the ‘total completion time’ and their goodness. In order to demonstrate the comparative analysis, numerical examples are illustrated. A Gantt chart is additionally conducted to exhibit the efficiency of these algorithms graphically. Eventually, a feasible outcome for each condition has been obtained by analyzing these four algorithms, which leads to getting a competent, time and cost-efficient algorithm.

Abstract Palatal defects are rehabilitated by fabricating maxillofacial prostheses called obturators. The treatment incorporates taking deviously unpredictable impressions to facsimile the palatal defects into plaster casts for obturator fabrication in the dental laboratory. The casts are then digitally stored using expensive hardware to prevent physical damage or data loss and, when required, future obturators are digitally designed, and 3D printed. Our objective was to construct and validate an economic in-house smartphone-integrated stereophotogrammetry (SPINS) 3D scanner and to evaluate its accuracy in designing prosthetics using open source/free (OS/F) digital pipeline. Palatal defect models were scanned using SPINS and its accuracy was compared against the standard laser scanner for virtual area and volumetric parameters. SPINS derived 3D models were then used to design obturators by using (OS/F) software. The resultant obturators were virtually compared against standard medical software designs. There were no significant differences in any of the virtual parameters when evaluating the accuracy of both SPINS, as well as OS/F derived obturators. However, limitations in the design process resulted in minimal dissimilarities. With further improvements, SPINS based prosthetic rehabilitation could create a viable, low cost method for rural and developing health services to embrace maxillofacial record keeping and digitised prosthetic rehabilitation.

In recent decades, wood structures have gained significant attention for their ecological benefits and architectural versatility. The performance of wood, a popular construction material, often depends on the integrity of its connections. This study focuses on bolted glulam timber connections, which are strong but prone to cracks that pose structural health challenges. Traditional crack evaluation methods are manual, time-consuming, and error-prone. To address these issues, this research proposes a two-stage performance evaluation method. In the first stage, an innovative approach called 'Enhanced Deep Line Segment Detection' (Deep LSD), a non-supervised machine learning technique, is used for crack detection without relying on large, annotated datasets, thus enhancing efficiency and adaptability. In the second stage, cyclic loading assays simulate varying damage stages to collect data and establish a correlation between crack states and connection damage. The Park and Ang damage model is employed within this framework to assess the extent of damage. The efficacy of enhanced deep LSD is confirmed by comparing detected crack areas with ground truth measurements, yielding a high R-squared value of 0.98 and a minimal error margin of 1.41. Additionally, a damage index based on the Chinese standard (GB/T 24335-2009) is used to classify damage across different connection groups, ensuring robustness and alignment with established practices. [ABSTRACT FROM AUTHOR]

Objective: To determine the association of socio-demographic and clinic-pathological risk factors with oral cancer in Kelantan, Malaysia. Material and Methods: A 19-year cross-sectional survey was performed in Hospital Universiti Sains Malaysia (HUSM), Malaysia. Medical record of 301 oral cancer patients was retrieved from the Medical Records office. Results: The majority of the oral cancer cases were male (62.8%), non-smokers (57.5%), non-alcohol consumers (83.4%), non-betel quid chewers (96.7%), and belonged to Malay ethnicity (68.8%). At the time of diagnosis, most of the patients were at stage II (38.9%). Approximately one-third (30.6%) of the total OC patients experienced loco-regional/distant metastasis, whereas no metastasis was detected in around two-thirds of cases (69.4%). A combination of surgery and radiotherapy was the most commonly employed treatment modality (27.2%). At the time of this study, the survival status of most of the patients was alive (69.1%). The most frequently encountered oral cancer in the Kelantanese population was oral squamous cell carcinoma (70.1%), with the tongue being the most frequently involved oral cavity site (35.5%). Conclusion: More than three-fourths of the cases were alive at follow-up, which included the cases that did not undergo any form of treatment.

Electrical resistivity tomography (ERT) has turned out to be one of the most applied and user-friendly geophysical methods in geotechnical and geoenvironmental research. ERT is an emerging technology that is becoming popular nowadays for investigating subsurface conditions. Multiple attributes of the technology using various electrode configurations significantly reduce measurement time and are suitable for applications even in hardly accessible mountain areas. It is a noninvasive test for subsurface characterization and a very sensitive method used to determine geophysical properties, i.e., structural integrity, water content, fluid composition, etc. This paper aimed to elucidate the ERT technique's main features and applications in geotechnical and geoenvironmental engineering through four case studies. The first case study investigated the possible flow paths and areas of moisture accumulation after leachate recirculation in a bioreactor landfill. The second case study attempted to determine the moisture variation along highway pavement. The third case study explored the slope failure investigation by ERT. The fourth case study demonstrated the efficiency of the ERT method in the landfill evapotranspiration (ET) cover to investigate moisture variation on a broader scale and performance monitoring. In all of the four cases, ERT exhibited promising performance. [ABSTRACT FROM AUTHOR]

Influence of different levels of silicon under a variety of thermal treatment is investigated on the thermophysical behaviour of Al-Si-Cu-Mg automotive alloys. Conventional cast alloys are subjected to T6 heat treatment for age hardening. Hardness values, thermal conductivity along with microstructural observation under different heattreated conditions are well thought-out to comprehend the ageing performance and the precipitation behaviour of the alloys. From these investigational results it is indicated that two successive hardening peaks take place in the aged alloys. Ageing sequence consists of different phases like a supersaturated solid solution, GP zones, intermediate β", intermetallic β', equilibrium β and the Q phase but GP zones and the metastable phases are most likely responsible for these ageing peaks. Thermal conductivity decreases for these precipitates formation during ageing and increases for relieving the internal stress, dissolution of metastable phase and coarsening the precipitation of the alloys. Adding up of Si to the alloy showed earlier ageing peaks with higher intensities intended for its increasing properties of heterogeneous nucleation and diffusion kinetics. After ageing around at 200°C for four hours the alloys offer the height hardness. Microstructural study reveals that eutectic silicon makes the grain boundary coarsen and beyond the eutectic composition the star-shaped blocky primary Si is formed. Subsequent to ageing at 350oC for one hour the alloys reach completely recrystallized state. [ABSTRACT FROM AUTHOR]

Background: Severe sepsis and septic shock are two major causes of death in children with sepsis. The Pediatric risk of mortality (PRISM) score allows for mortality risk assessment in the pediatric ICU. It is institution-independent and can be used within limits to compare different intensive care units. Materials and Methods: It was a prospective observational hospital based study. All patients admitted in the Paediatric Intensive Care Unit between the age group of one month to 14 years who fulfilled the inclusion criteria were prospectively observed and details were recorded in a predesigned proforma. Critical illness severity was estimated with the Paediatric Risk of Mortality (PRISM III-24) score. Results: 30 patients (14 males & 16 females) were included in the study&mortality rate of 40.0% was witnessed.29(96.7%) patients were given pressor support. In terms of outcome, 17(94.4%) of the 18 discharged patients received pressor support and 01(5.6%) of them did not receive any pressor support. On the other hand, all 12 expired patients received pressor support (P=0.406). 25(83.3%) patients required mechanical ventilation. In terms of outcome, 14(77.8%) of the discharged patients required mechanical ventilation while 04(22.2%) of them did not require it. On the other hand, out of 16 patients who expired, 11(91.7%) required mechanical ventilation while 01(8.3%) did not require it (P=0.317). None of the patients, either from the discharged ones or from the expired ones, had a low-risk HsCRP level(<3). The mean PRISM III Score at admission in discharged patients was 20.5±3.65 and the mean PRISM III Score at admission in expired patients was 23.25±1.76 (P=0.01). The mean PRISM III score at 24 hours in discharged patients was 17.33±4.46 and the mean PRISM III score in expired patients was 22.50±1.50 (P=0.001). When analyzed in specificity versus threshold (ROC) curve, PRISM III Score was significant at both time intervals i.e., at admission (P=0.019) and at 24 hours (P=0.003). Conclusion:. [ABSTRACT FROM AUTHOR]

INTRODUCTION: Different types of diseases have been treated by restricted caloric intake or fasting. Although during this long time, fasting protective measures, for example, supplements, are given to the patients to protect vital organs such as the liver and kidney, little attention is given to the brain. The current research aims to investigate hypoglycemia due to prolonged fasting disrupts blood-brain barrier (BBB) in mice. MATERIALS AND METHODS: Immunohistochemistry (IHC) and in situ hybridization (ISH) techniques were used to examine the expression of different genes. Evans blue extravasation and wet-dry technique were performed to evaluate the integrity of BBB and the formation of brain edema, respectively. RESULTS: We confirmed that hypoglycemia affected mice fasting brain by examining the increased expression of glucose transporter protein 1 and hyperphosphorylation of tau protein. We subsequently found downregulated expression of some genes, which are involved in maintaining BBB such as vascular endothelial growth factor (VEGF) in astrocytes and claudin-5 (a vital component of BBB) and VEGF receptor (VEGFR1) in endothelial cells by ISH. We also found that prolonged fasting caused the brain endothelial cells to express lipocalin-2, an inflammatory marker of brain endothelial cells. We performed Evans blue extravasation to show more dye was retained in the brain of fasted mice than in control mice as a result of BBB disruption. Finally, wet-dry method showed that the brain of prolonged fasted mice contained significantly higher amount of water confirming the formation of brain edema. Therefore, special attention should be given to the brain during treatment with prolonged fasting for various diseases. CONCLUSIONS: Our results demonstrated that hypoglycemia due to prolonged fasting disrupts BBB and produces brain edema in wild-type mice, highlighting the importance of brain health during treatment with prolonged fasting. [ABSTRACT FROM AUTHOR]

Abstract Background Neurological disorders are the most common cause of morbidity and mortality in developing countries. Available evidence on urban–rural differences on neurological diseases is scare in such countries. Our study objective was to determine the prevalence of neurological diseases in urban and rural tertiary care hospitals of Sindh, Pakistan. Methods This was a cross sectional study conducted in selected urban and rural region of tertiary care hospitals of Sindh, Pakistan. The outpatients medical records of adults (18 years and above) was obtained from January 1st, 2014 to December 31st, 2014. Results A total of 10,786 outpatients visit were recorded in this period. Mean age of the participants was 40.6 ± 15 years; majority was females 6104 (56.6%). About three-fourth of the patients were from rural hospital 7828 (72.6%). Common neurological diseases were headache disorders 3613 (33.4%), nerve and root lesion 2928 (27.1%), vascular diseases 1440 (13.3%), epilepsies 566 (5.2%), muscle disorders 424 (3.9%), psychiatric disorders 340 (3.1%) and CNS infection 303 (2.8%). Comparison between the urban and rural samples showed that ischaemic stroke (72.7% vs. 82%) and psychiatric disorders (2.1% vs. 3.5%) were more prevalent in rural area as compared to urban setting. Conclusion Stroke, headache and nerve and root lesion are major causes of neurological disorders in urban and rural settings of Sindh, Pakistan. The policy and planning must be focus on primary care, preventive measures and the promotion of health.

In his commentary, Boike Rehbein questions the hegemony that the Global North maintains over the theory and philosophy of science and calls for an epistemological and disciplinary reinvention. The scientific discourse needs to move away from binaries such as global–national and universalism–relativism, as they are misleading in their exclusivity. Rather, Rehbein calls for a multicentric epistemology informed by local sources, perspectives and theories. Area Studies is identified as a key arena of such an epistemological shift, reinventing itself by becoming increasingly comparative and translocal in scope, as well as inter-/trans- or multidisciplinary. In this context, the values and challenges of cooperation in Area Studies are highlighted. Ahsan Kamal praises Rehbein’s approach as a concrete contribution to decolonising Area Studies and knowledge production, but urges a constant questioning of the location of the North and South, the authenticity of what is deemed the “local”, and the beneficiaries of this new form of knowledge production. Manan Ahmed Asif considers that despite progress being made and Rehbein’s approach having important ethical value, colonialism is still deeply inscribed in Area Studies, as the Global North continues to control the material, financial and organisational resources.

Objective. The aim of this systematic review was to evaluate the effectiveness of laser application in temporomandibular joint disorder. Methods. PubMed, SCOPUS, Science Direct, Web of Science, and Google Scholar electronic databases were searched systematically with restricting the languages to only English and year (January 2001 to March 2020), and studies were selected based on the inclusion criteria. Study quality and publication bias were assessed by using the Robvis, a software package of R statistical software. Results. This systematic review included 32 studies (1172 patients) based on the inclusion and exclusion criteria. Most of the studies reported significant reduction of pain by the use of the laser during TMD treatment. Two-thirds of the study (78.13%) found a better outcome comparing with conventional one. According to Robvis, 84.4% of the studies were high methodological studies with low risk of bias. Conclusion. TMD patients suffer with continuous pain for long time even after conventional treatment. Laser therapy shows a promising outcome of pain reduction for TMD patients. Therefore, laser therapy can be recommended for the TMD patients’ better outcome. This trial is registered with PROSPERO (CRD42020177562).

This paper presents a custom made small rover based surveying, mapping and building information modeling solution. Majority of the commercially available mobile surveying systems are larger in size which restricts their maneuverability in the targeted indoor vicinities. Furthermore their functional cost is unaffordable for low budget projects belonging to developing markets. Keeping in view these challenges, an economical indigenous rover based scanning and mapping system has developed using orthogonal integration of two low cost RPLidar A1 laser scanners. All the instrumentation of the rover has been interfaced with Robot Operating System (ROS) for online processing and recording of all sensorial data. The ROS based pose and map estimations of the rover have performed using Simultaneous Localization and Mapping (SLAM) technique. The perceived class 1 laser scans data belonging to distinct vicinities with variable reflective properties have been successfully tested and validated for required structural modeling. Systematically the recorded scans have been used in offline mode to generate the 3D point cloud map of the surveyed environment. Later the structural planes extraction from the point cloud data has been done using Random Sampling and Consensus (RANSAC) technique. Finally the 2D floor plan and 3D building model have been developed using point cloud processing in appropriate software. Multiple interiors of existing buildings and under construction indoor sites have been scanned, mapped and modelled as presented in this paper. In addition, the validation of the as-built models have been performed by comparing with the actual architecture design of the surveyed buildings. In comparison to available surveying solutions present in the local market, the developed system has been found faster, accurate and user friendly to produce more enhanced structural results with minute details. [ABSTRACT FROM AUTHOR]

Clean water is vital for sustainable development, fostering socio-economic growth, ecological stability, and human survival. The study aimed to evaluate the quality of tube well water in specific residential areas of Khulna for drinking purposes, comparing it with the standards of World Health Organization (WHO) and Bangladesh (BD). Twenty tube well water samples were collected from residential areas at depths of 700–1500 ft. The samples were tasted with about 20 parameters, including physical: color, taste, odor, total dissolved solids (TDS) and total suspended solids (TSS); chemical: acidity/alkalinity (pH), arsenic (As), electrical conductivity (EC), dissolved oxygen (DO), bicarbonate (HCO3–), calcium (Ca2+), magnesium (Mg2+), sodium (Na+), chloride (Cl–), iron (Fe), phosphate (PO43–), sulfate (SO42–), potassium (K+); and bacteriological parameters: total coliforms and E. coli bacteria. Most of the samples were found to have higher TDS (avg. 1380 mg/L), TSS (avg. 620 mg/L), Fe (avg. 20.2 mg/L), K+ (avg. 194.1 mg/L), and Na+ (avg. 439 mg/L) concentrations compared to the WHO and BD Standards. 90 to 95% of samples exhibited acceptable levels of EC, pH, DO, Mg2+, Ca2+, Cl–, and SO43–. The salinity levels in most of the samples were excessive to be used for drinking, and the levels were especially very high in samples S-01(Na+ 820 and Cl- 3195 mg/L) and S-04 (Na+ 660 and Cl- 2946 mg/L). The arsenic levels were found to be higher than acceptable limit in S-01 (0.086 mg/L) and S-04 (0.091 mg/L) as well. E. coli and other bacteria in a few samples (S-01, 04, 13, 16, 17, 19) were detected. [ABSTRACT FROM AUTHOR]

Moisture and suction variation beneath pavement contribute significantly to the volumetric deformation of expansive subgrade in response to climatic loading. In order to quantify the damage due to climatic loading, estimation of moisture, and suction variation in pavement subgrade is of paramount importance. The objective of the current study is to investigate the moisture and suction variation in response to precipitation events with the aid of numerical modeling in the unsaturated pavement subgrade. In unsaturated soils where the voids are filled with both water and air, the SWCC describes the volume of the voids that remain filled with water as the soil drains pore water. The SWCC has been identified as the vital soil information required to analyze seepage, stability, and volume change problems involved in unsaturated soils. However, the selection of unsaturated flow parameters is typically laboratory-based which represents specific conditions rather than a dynamic scenario of the field. In this study, an attempt was undertaken to conduct numerical modeling using field generated unsaturated flow parameters along with five other predictive models. Results indicated the distinct variation of moisture and suction distribution in subgrade from the same rainfall event while using laboratory versus field generated SWCC unsaturated flow parameters. In addition, predicted model yielded output was also varying with the field generated parameters’ output. Instead of using laboratory-generated static parameters, it was found that field generated dynamic unsaturated flow parameters were able to capture better suction variation at the pavement subgrade.