Search

The Latarjet procedure is an established surgical treatment for recurrent glenohumeral joint instability with glenoid bone loss. Intraoperatively, the conjoint tendon and its attachement on the coracoid bone graft is routed through a split in subscapularis where the graft is fixed to and augments the anteroinferior glenoid. The objective of this in vitro study was to quantify the influence of glenohumeral joint position and conjoint tendon force on the lines of action and moment arms of subscapularis muscle sub‐regions after Latarjet surgery. Eight fresh‐frozen, entire upper extremities were mounted onto a testing apparatus, and a cable‐pulley system was used to apply physiological muscle loading to the major shoulder muscles. The lines of action and moment arms of four subregions of subscapularis (superior, mid‐superior, mid‐inferior, and inferior) were quantified radiographically with the conjoint tendon unloaded and loaded while the shoulder was in (i) 0° abduction (ii) 90° abduction (iii) 90° abduction and full external rotation (ABER), and (iv) the apprehension position, defined as ABER with 30° horizontal extension. Conjoint tendon loading after Latarjet surgery significantly increased the inferior inclination of the lines of action of the mid‐inferior and inferior subregions of subscapularis in the scapular plane in ABER and apprehension positions (p < 0.001), as well as decreased the horizontal flexion moment arm of the inferior subscapularis (p = 0.040). Increased subscapularis inferior inclination may ultimately increase inferior joint shear potential, while smaller horizontal flexion leverage may reduce joint flexion capacity. The findings have implications for Latarjet surgical planning and postoperative rehabilitation prescription. [ABSTRACT FROM AUTHOR]

Dual-task walking and cell phone usage, which is associated with high cognitive load and reduced situational awareness, can increase risk of a collision, a fall event, or death. The objective of this study was to quantify the effect of dual-task cell phone talking, texting, and reading while walking on spatiotemporal gait parameters; minimum foot clearance; and dynamic stability of the lower limb joints, trunk, and head. Nineteen healthy male participants walked on an instrumented treadmill at their self-selected speed as well as walking while simultaneously (1) reading on a cell phone, (2) texting, and (3) talking on a cell phone. Gait analyses were performed using an optical motion analysis system, and dynamic stability was calculated using the Maximum Lyapunov Exponent. Dual-task cell phone usage had a significant destabilizing influence on the lower limb joints during walking. Cell phone talking while walking significantly increased step width and length and decreased minimum foot clearance height (P <.05). The findings suggest that dual-task walking and cell phone conversation may present a greater risk of a fall event than texting or reading. This may be due to the requirements for more rapid information processing and cognitive demand at the expense of motor control of joint stability. [ABSTRACT FROM AUTHOR]

Subacromial impingement (SAI) is associated with shoulder pain and dysfunction and is exacerbated by rotator cuff tears; however, the role of acromioplasty in mitigating subacromial contact in the rotator cuff deficient shoulder remains debated. This study aimed to quantify the influence of isolated and combined tears involving the supraspinatus on subacromial contact during abduction; and second, to evaluate the influence of acromioplasty on joint space size and subacromial contact under these pathological conditions. Eight fresh‐frozen human cadaveric upper limbs were mounted to a computer‐controlled testing apparatus that simulated joint motion by simulated force application. Shoulder abduction was performed while three‐dimensional joint kinematics was measured using an optoelectronic system, and subacromial contact evaluated using a digital pressure sensor secured to the inferior acromion. Testing was performed after an isolated tear to the supraspinatus, as well as tears involving the subscapularis and infraspinatus‐teres minor, both before and after acromioplasty. Rotator cuff tears significantly increased peak subacromial pressure (p < 0.001), average subacromial pressure (p = 0.001), and contact force (p = 0.034) relative to those in the intact shoulder. Following acromioplasty, significantly lower peak subacromial contact pressure, force and area were observed for all rotator cuff tears involving the supraspinatus at 30° of abduction (p < 0.05). Acromioplasty predominantly reduces acromion thickness anteriorly thereby reducing subacromial contact in the rotator cuff deficient shoulder, particularly in early to mid‐abduction where superior glenohumeral joint shear force potential is large. These findings provide a biomechanical basis for acromioplasty as an intervention for SAI syndrome and as an adjunct to rotator cuff repairs. [ABSTRACT FROM AUTHOR]

Dual‐energy X‐ray absorptiometry (DXA) scans are one of the most frequently used imaging techniques for calculating bone mineral density, yet calculating fracture risk using DXA image features is rarely performed. The objective of this study was to combine deep neural networks, together with DXA images and patient clinical information, to evaluate fracture risk in a cohort of adults with at least one known fall and age‐matched healthy controls. DXA images of the entire body as, well as isolated images of the hip, forearm, and spine (1488 total), were obtained from 478 fallers and 48 non‐faller controls. A modeling pipeline was developed for fracture risk prediction using the DXA images and clinical data. First, self‐supervised pretraining of feature extractors was performed using a small vision transformer (ViT‐S) and a convolutional neural network model (VGG‐16 and Resnet‐50). After pretraining, the feature extractors were then paired with a multilayer perceptron model, which was used for fracture risk classification. Classification was achieved with an average area under the receiver‐operating characteristic curve (AUROC) score of 74.3%. This study demonstrates ViT‐S as a promising neural network technique for fracture risk classification using DXA scans. The findings have future application as a fracture risk screening tool for older adults at risk of falls. © 2023 The Authors. JBMR Plus published by Wiley Periodicals LLC on behalf of American Society for Bone and Mineral Research. [ABSTRACT FROM AUTHOR]

Background: Glenohumeral joint contact loading before and after glenoid bone grafting for recurrent anterior instability remains poorly understood. Purpose: To develop a computational model to evaluate the influence of glenoid bone loss and graft positioning on graft and cartilage contact pressures after the Latarjet procedure. Study Design: Controlled laboratory study. Methods: A finite element model of the shoulder was developed using kinematics, muscle and glenohumeral joint loading of 6 male participants. Muscle and joint forces at 90° of abduction and external rotation were calculated and employed in simulations of the native shoulder, as well as the shoulder with a Bankart lesion, 10% and 25% glenoid bone loss, and after the Latarjet procedure. Results: A Bankart lesion as well as glenoid bone loss of 10% and 25% significantly increased glenoid and humeral cartilage contact pressures compared with the native shoulder (P <.05). The Latarjet procedure did not significantly increase glenoid cartilage contact pressure. With 25% glenoid bone loss, the Latarjet procedure with a graft flush with the glenoid and the humerus positioned at the glenoid half-width resulted in significantly increased humeral cartilage contact pressure compared with that preoperatively (P =.023). Under the same condition, medializing the graft by 1 mm resulted in humeral cartilage contact pressure comparable with that preoperatively (P =.097). Graft lateralization by 1 mm resulted in significantly increased humeral cartilage contact pressure in both glenoid bone loss conditions (P <.05). Conclusion: This modeling study showed that labral damage and greater glenoid bone loss significantly increased glenoid and humeral cartilage contact pressures in the shoulder. The Latarjet procedure may mitigate this to an extent, although glenoid and humeral contact loading was sensitive to graft placement. Clinical Relevance: The Latarjet procedure with a correctly positioned graft should not lead to increased glenohumeral joint contact loading. The present study suggests that lateral graft overhang should be avoided, and in the situation of large glenoid bone defects, slight medialization (ie, 1 mm) of the graft may help to mitigate glenohumeral joint contact overloading. [ABSTRACT FROM AUTHOR]

Background: Extracortical single-button (SB) inlay repair is a commonly used distal biceps tendon technique. However, complications (eg, neurovascular injury) and nonanatomic repairs have led to the development of intracortical fixation techniques. Purpose: To compare the biomechanical stability of extracortical SB repair with an anatomic intracortical double-button (DB) repair technique. Study Design: Controlled laboratory study. Methods: The distal biceps tendon was transected in 18 cadaveric elbows from 9 donors. One elbow of each donor was randomly assigned to the extracortical SB or anatomic DB group. Both groups were cyclically loaded with 60 N over 1000 cycles between 90° of flexion and full extension. The elbow was then fixed in 90° of flexion and the repair construct loaded to failure. Gap formation and construct stiffness during cyclic loading and ultimate load to failure were analyzed. Results: When compared with the extracortical SB technique after 1000 cycles, the anatomic DB technique showed significantly less gap formation (mean ± SD, 2.7 ± 0.8 vs 1.5 ± 0.9 mm; P =.017) and significantly more construct stiffness (87.4 ± 32.7 vs 119.9 ± 31.6 N/mm; P =.023). Ultimate load to failure was not significantly different between the groups (277 ± 93 vs 285 ± 135 N; P =.859). The failure mode in the anatomic DB group was significantly different from that of the extracortical SB technique (P =.002) and was due to fracture avulsion of the cortical button in 7 of 9 specimens (vs none in the SB group). Conclusion: Our study shows that the intracortical DB technique produces equivalent or superior biomechanical performance to that of the SB technique. The DB technique may offer a clinically viable alternative to the SB repair technique. Clinical Relevance: This study suggests, at worst, an equivalent and, at best, a superior biomechanical performance of intracortical anatomic DB footprint repair at the time of surgery. However, the mode of failure suggests that this technique should not be used in patients with poor bone quality. [ABSTRACT FROM AUTHOR]

We compared four methods of metacarpal shaft fixation: 2.2 mm intramedullary headless compression screw; 3.0 mm intramedullary headless compression screw; intramedullary K-wire fixation; and dorsal plate fixation. Transverse mid-diaphyseal fractures were created in 64 metacarpal sawbones and were assigned into four groups. Peak load to failure and stiffness were measured in cantilever bending and torsion. We found that dorsal plating had the highest peak load to failure. However, initial bending stiffness of the 3.0 mm intramedullary headless compression screw was higher than that of the dorsal plates. In torsion testing, dorsal plating had the highest peak torque, but there was no significant difference in torsional stiffness between the plate and intramedullary headless compression screw constructs. We concluded that intramedullary headless compression screw fixation is biomechanically superior to K-wires in cantilever bending and torsion; however, it is less stable than dorsal plating. In our study, the initial stability provided by K-wire fixation was sufficient to cope with expected loads in the early rehabilitation period, whereas dorsal plates and IHCS constructs provided stability far in excess of what is required. [ABSTRACT FROM AUTHOR]