Search

Overheating in built environments during climate extreme heat events is a major concern to human health, particularly for people vulnerable to prolonged exposure to heat and humidity. However, currently available methods for assessing the risk of overheating lack robust procedures to evaluate the effects of overheating on the comfort and health of vulnerable occupants residing in the various different dwellings. This paper developed a general methodology to define and characterise overheating events and evaluate the risk to reduced comfort and undesirable health effects of building occupants exposed to extreme heat events. Criteria to declare overheating were developed based on heat-related health outcomes related to limits for body dehydration and core temperature of healthy average-age and older adults. The methodology was then applied to a case study of a residential building with typical local construction practice for cold climates and compared with existing methods for assessing risk from exposure to extreme heat events. The results showed that all the methods predicted that highly insulated and airtight buildings are more prone to overheating than older buildings that are less well insulated and airtight. However, only the proposed methodology described in this paper predicted that natural ventilation through opening windows significantly reduced the overheating risk to below the threshold value. Furthermore, multi criteria methods might be difficult to apply in practice in that it is not guaranteed to violate all the criteria to declare a building space is not overheated. The proposed methodology sets the groundwork for establishing a benchmark model from which different overheating metrics can be compared.

The two-node bioheat model is widely used in thermal comfort standards and design tools. In recent years, there have been many new experimental studies and thermoregulatory models developed under stressful heat or cold conditions, but those have not been tested under the two-node model structure. Furthermore, limited validation studies of the two-node model revealed significant discrepancies in the prediction of skin temperature. This study collects relevant thermoregulatory models (six for sweating, three for skin blood flow and shivering, and four for sweat evaporation efficiency) and devises a methodology to compare the accuracy of various model combinations against experimental data. An improved model is developed and validated under heat and cold exposure conditions. The RMSE method is used to compare the accuracy of various model combinations and to optimize the proposed thermoregulatory model constants. The results reveal that only several model combinations can be considered as accurate for the core and skin temperature predictions, amongst which are the proposed models at the first rank.

Exposure to hot and humid conditions results in physiological changes in metabolism, cardiac output and thermoregulation of the young adult and these changes deviate with elderly due to aging. The elderly population is more vulnerable than the healthy and young population due to age-weakened physiology and thermoregulatory functions. There are, however, limited bioheat models addressing such changes due to hot exposure in the young and the elderly. This paper develops robust bioheat models for young and elderly while incorporating the physiological changes under exposure to heat-stressful conditions for both age groups the age-related changes in physiology and thermoregulation to an elderly human. However, due to a large variability of thermoregulation among the elderly population, a sensitivity analysis revealed that the average elderly is characterized by metabolic rate and cardiac output, which are lower than those of the young by 21% and 14.4%, respectively. Moreover, the thresholds of the onset of vasodilation and sweating are delayed from those of young adults by 0.5 °C and 0.21 °C, respectively. The elderly and young bioheat models were validated with number of independent published experimental studies under hot exposures in steady and transient conditions. Model predictions of core and mean skin temperatures showed good agreement with published experimental data with a discrepancy of 0.1 °C and 0.5 °C, respectively.

This article presents a simulation study to predict the energy performance of the Central Sunlighting System (CSS) installed in open-plan offices. Several simulation tools are combined to conduct the simulations. SkyVision calculates the daylight luminous flux and the lighting and solar heat gains of the CSS. A set of coefficients pre-calculated using Radiance relates the desktop illuminances to the CSS luminous fluxes. DaySim is used to compute the daylight illuminance from the perimeter windows. ESP-r is used to compute the heating and cooling energy use of the office spaces. The results show that the CSS may save a significant amount of energy in North American climates. Energy savings from the combination of daylighting from windows and the CSS for typical, four-cubicle, open-plan offices range from 44% to 57% for lighting, 8% for cooling and from 14% to 23% for the total (lighting, cooling and heating) energy.

This article presents the development of a sufficiently accurate and reliable optical model to predict the lighting and thermal performance of the central sunlighting system (CSS). The model is based on the ray tracing technique to compute the amount of sunlight flux transmission through the light guide to interior spaces of buildings, and absorption of solar radiation within the components of the CSS, which may become solar heat gains indoors. The model is validated using a detailed ray tracing technique and field measurements carried out on a previous prototype. The validation results show that the model predictions are in good agreement with the ray tracing and measurement results. The model can be integrated in existing fenestration design tools, or in whole-building energy simulation software, with significantly lower calculation time compared to the full integration of suitable lighting simulation software.

Domed skylights are important architectural design elements that deliver daylight and solar heat into buildings, and connect the building's occupants to the outdoor environment. Despite the widespread use of domed skylights, there is limited information on the convective heat transfer within cavities of multi-glazed domes. This information is required to evaluate the thermal performance of domed skylights for product rating purposes, or to evaluate the heat loss or gain of installed skylights in buildings. This article presents a numerical study on the laminar natural convection in horizontal concentric domed cavities heated from the inside surface. A commercial CFD package is used to solve for the flow and temperature fields. The results show that for large cavity gap spacing-to-radius ratios, the cavity flow is mono-cellular and steady state. For small gap spacing ratios, however, the cavity flow may be multi-cellular and transient periodic. Practical correlations for the heat transfer coefficient as a ...

The daylight coefficient (DC) method is a powerful and efficient method to perform annual daylight illuminance simulation. A set of coefficients are calculated for a given room space and static fenestration systems prior to simulation start. Time series of indoor daylight illuminances are obtained by only knowing the sky luminance. However, for rooms with dissimilar dynamic complex fenestration systems (such as windows with movable shadings) whose optical behaviour (transmission, reflection and scattering) may change during simulation, the efficiency of the DC method may be compromised as another whole set of coefficients must be re-calculated. This study presents the development of a new methodology to compute the DC set for rooms with dissimilar complex fenestration components only once prior to simulation start. A validation study is carried out, in which the daylight illuminances in an office space equipped with a clear window and internal Venetian blinds are compared using predictions from the presen...

By admitting natural light deep into a building and connecting occupants with the outside, skylights can improve the aesthetic look of buildings and increase occupant satisfaction. In addition, by allowing the entry of natural light electric light levels can be reduced thereby leading to energy savings. However, the potential energy benefits and amenities of skylights have not been fully exploited in today’s building design due to some theoretical and technical challenges. The lack of design tools is one of the major hurdles building designers face to adopt such products and quantify their energy benefits. The optical characteristics of skylights are the significant factors affecting their energy benefits. Recognizing this gap, the SkyVision tool was developed to assist skylight manufacturers and building designers in developing appropriate skylight designs for given building types and daylighting applications. This paper describes the models implemented in SkyVision to compute the optical characteristics of barrel-vault skylights with clear, fully translucent or partially diffusing glazing under beam and diffuse light. The models are based on the ray-tracing technique. Under diffuse light, two models are developed: (1) a luminance-based model when the sky luminance distribution is known; and (2) an illuminance-based model when the illuminance on a horizontal surface is known. The second model is simpler and faster and more suitable for annual performance calculation. Experimental measurements of the skylight transmittance were conducted under real sky conditions to validate the model predictions. The actual measurements compared reasonably well with the model predictions. The predictions from the luminance-based and illuminance-based models showed good agreement with each other. When applied to an example study, the models predicted that vault skylights with clear glazing are more effective than flat skylights with similar glazing in boosting the beam light transmittance, particularly in winter days. Translucent vault skylights are more effective than flat skylights with similar glazing in reducing solar heat gains, particularly in summer days. Translucent skylights may out-perform transparent skylights, particularly during sunny days in winter.