Search

One of the direct and unavoidable consequences of global warming-induced rising temperatures is the more recurrent and severe heatwaves. In recent years, even countries like Malaysia seldom had some mild to severe heatwaves. As the Earth's average temperature continues to rise, heatwaves in Malaysia will undoubtedly worsen in the future. It is crucial to characterize and monitor heat events across time to effectively prepare for and implement preventative actions to lessen heatwave's social and economic effects. This study proposes heatwave-related indices that take into account both daily maximum (Tmax) and daily lowest (Tmin) temperatures to evaluate shifts in heatwave features in Peninsular Malaysia (PM). Daily ERA5 temperature dataset with a geographical resolution of 0.25° for the period 1950–2022 was used to analyze the changes in the frequency and severity of heat waves across PM, while the LandScan gridded population data from 2000 to 2020 was used to calculate the affected population to the heatwaves. This study also utilized Sen's slope for trend analysis of heatwave characteristics, which separates multi-decadal oscillatory fluctuations from secular trends. The findings demonstrated that the geographical pattern of heatwaves in PM could be reconstructed if daily Tmax is more than the 95th percentile for 3 or more days. The data indicated that the southwest was more prone to severe heatwaves. The PM experienced more heatwaves after 2000 than before. Overall, the heatwave-affected area in PM has increased by 8.98 km2/decade and its duration by 1.54 days/decade. The highest population affected was located in the central south region of PM. These findings provide valuable insights into the heatwaves pattern and impact. [ABSTRACT FROM AUTHOR]

Rainfall is crucial for the development and management of water resources. Six hybrid soft computing models, including multilayer perceptron (MLP)–Henry gas solubility optimization (HGSO), MLP–bat algorithm (MLP–BA), MLP–particle swarm optimization (MLP–PSO), radial basis neural network function (RBFNN)–HGSO, RBFNN–PSO, and RBFGNN–BA, were used in this study to forecast monthly rainfall at two stations in Malaysia (Sara and Banding). Different statistical measures (mean absolute error (MAE) and Nash–Sutcliffe efficiency (NSE) and percentage of BIAS (PBIAS)) and a Taylor diagram were used to assess the models' performance. The results indicated that the MLP–HGSO performed better than the other models in forecasting rainfall at both stations. In addition, transition matrices were computed for each station and year based on the conditional probability of rainfall or absence of rainfall on a given month. The values of MAE for testing processes for the MLP–HGSO, MLP–PSO, MLP–BA, RBFNN–HGSO, RBFNN–BA, and RBFNN–PSO at the first station were 0.712, 0.755, 0.765, 0.717, 0.865, and 0.891, while the corresponding NSE and PBIAS values were 0.90–0.23, 0.83–0.29, 0.85–0.25, 0.87–0.27, 0.81–0.31, and 0.80–0.35, respectively. For the second station, the values of MAE were found 0.711, 0.743, 0.742, 0.719, 0.863 and 0.890 for the MLP–HGSO, MLP–PSO, MLP–BA, RBFNN–HGSO, RBFNN–BA, and RBFNN–PSO during testing processes and the corresponding NSE–PBIAS values were 0.92–0.22, 0.85–0.28, 0.89–0.26, 0.91–0.25, 0.83–0.31, 0.82–0.32, respectively. Based on the outputs of the MLP–HGSO, the highest rainfall was recorded in 2012 with a probability of 0.72, while the lowest rainfall was recorded in 2006 with a probability of 0.52 at the Sara Station. In addition, the results indicated that the MLP–HGSO performed better than the other models within the Banding Station. According to the findings, the hybrid MLP–HGSO was selected as an effective rainfall prediction model. [ABSTRACT FROM AUTHOR]

The increases in extreme rainfall could increase the probable maximum flood (PMF) and pose a severe threat to the critical hydraulic infrastructure such as dams and flood protection structures. This study is conducted to assess the impact of climate change on PMF in a tropical catchment. Climate and inflow data of the Tenmengor reservoir, located in the state of Perak in Malaysia, have been used to calibrate and validate the hydrological model. The projected rainfall from regional climate model is used to generate probable maximum precipitation (PMP) for future periods. A hydrological model was used to simulate PMF from PMP estimated for the historical and two future periods, early (2031 − 2045) and late (2060 − 2075). The results revealed good performance of the hydrological model with Nash–Sutcliffe efficiency, 0.74, and the relative standard error, 0.51, during validation. The estimated rainfall depths were 89.5 mm, 106.3 mm, and 143.3 mm, respectively, for 5, 10, and 50 years of the return period. The study indicated an increase in PMP by 162% to 507% and 259% to 487% during early and late periods for different return periods ranging from 5 to 1000 years. This would cause an increase in PMF by 48.9% and 122.6% during early and late periods. A large increase in PMF indicates the possibility of devastating floods in the future in his tropical catchment due to climate change. [ABSTRACT FROM AUTHOR]

The establishment of water quality prediction models is vital for aquatic ecosystems analysis. The traditional methods of water quality index (WQI) analysis are time-consuming and associated with a high degree of errors. These days, the application of artificial intelligence (AI) based models are trending for capturing nonlinear and complex processes. Therefore, the present study was conducted to predict the WQI in the Kinta River, Malaysia by employing the hybrid AI model i.e., GA-EANN (genetic algorithm-emotional artificial neural network). The extreme gradient boosting (XGB) and neuro-sensitivity analysis (NSA) approaches were utilized for feature extraction, and six different model combinations were derived to examine the relationship among the WQI with water quality (WQ) variables. The efficacy of the proposed hybrid GA-EANN model was evaluated against the backpropagation neural network (BPNN) and multilinear regression (MLR) models during calibration, and validation periods based on Nash–Sutcliffe efficiency (NSE), mean square error (MSE), root mean square error (RMSE), mean absolute percentage error (MAPE), and correlation coefficient (CC) indicators. According to the results of appraisal the hybrid GA-EANN model produced better outcomes (NSE = 0.9233/ 0.9018, MSE = 10.5195/ 9.7889 mg/L, RMSE = 3.2434/ 3.1287 mg/L, MAPE = 3.8032/ 3.0348 mg/L, and CC = 0.9609/ 0.9496) in calibration/ validation phases than BPNN and MLR models. In addition, the results indicate the better performance and suitability of the hybrid GA-EANN model with five input parameters in predicting the WQI for the study site. • Predicting the WQI for the Kinta River, Malaysia. • Efficiency of GA-EANN model was evaluated against BPNN and MLR. • XGB and NSA was employed for feature extraction. [ABSTRACT FROM AUTHOR]

Digital elevation model (DEM) plays a vital role in hydrological modelling and environmental studies. Many essential layers can be extracted from this land surface information, including slope, aspect, rivers, and curvature. Therefore, DEM quality and accuracy will affect the extracted features and the whole process of modeling. Despite freely available DEMs from various sources, many researchers generate this information for their areas from various observations. Sentinal-1 synthetic aperture radar (SAR) images are among the best Earth observations for DEM generation thanks to their availabilities, high-resolution, and C-band sensitivity to surface structure. This paper presents a comparative study, from a hydrological point of view, on the quality and reliability of the DEMs generated from Sentinel-1 data and DEMs from other sources such as AIRSAR, ALOS-PALSAR, TanDEM-X, and SRTM. To this end, pair of Sentinel-1 data were acquired and processed using the SAR interferometry technique to produce a DEM for two different study areas of a part of the Cameron Highlands, Pahang, Malaysia, a part of Sanandaj, Iran. Based on the estimated linear regression and standard errors, generating DEM from Sentinel-1 did not yield promising results. The river streams for all DEMs were extracted using geospatial analysis tool in a geographic information system (GIS) environment. The results indicated that because of the higher spatial resolution (compared to SRTM and TanDEM-X), more stream orders were delineated from AIRSAR and Sentinel-1 DEMs. Due to the shorter perpendicular baseline, the phase decorrelation in the created DEM resulted in a lot of noise. At the same time, results from ground control points (GCPs) showed that the created DEM from Sentinel-1 is not promising. Therefore, other DEMs' performance, such as 90-meters' TanDEM-X and 30-meters' SRTM, are better than Sentinel-1 DEM (with a better spatial resolution). [ABSTRACT FROM AUTHOR]

We used remote sensing techniques and machine learning to detect and map landslides, and landslide susceptibility in the Cameron Highlands, Malaysia. We located 152 landslides using a combination of interferometry synthetic aperture radar (InSAR), Google Earth (GE), and field surveys. Of the total slide locations, 80% (122 landslides) were utilized for training the selected algorithms, and the remaining 20% (30 landslides) were applied for validation purposes. We employed 17 conditioning factors, including slope angle, aspect, elevation, curvature, profile curvature, stream power index (SPI), topographic wetness index (TWI), lithology, soil type, land cover, normalized difference vegetation index (NDVI), distance to river, distance to fault, distance to road, river density, fault density, and road density, which were produced from satellite imageries, geological map, soil maps, and a digital elevation model (DEM). We used these factors to produce landslide susceptibility maps using logistic regression (LR), logistic model tree (LMT), and random forest (RF) models. To assess prediction accuracy of the models we employed the following statistical measures: negative predictive value (NPV), sensitivity, positive predictive value (PPV), specificity, root-mean-squared error (RMSE), accuracy, and area under the receiver operating characteristic (ROC) curve (AUC). Our results indicated that the AUC was 92%, 90%, and 88% for the LMT, LR, and RF algorithms, respectively. To assess model performance, we also applied non-parametric statistical tests of Friedman and Wilcoxon, where the results revealed that there were no practical differences among the used models in the study area. While landslide mapping in tropical environment such as Cameron Highlands remains difficult, the remote sensing (RS) along with machine learning techniques, such as the LMT model, show promise for landslide susceptibility mapping in the study area. [ABSTRACT FROM AUTHOR]