Search

The oxidation of organic carbon contained within sedimentary rocks ("petrogenic" carbon, or hereafter OCpetro) emits nearly as much C2 as is released by volcanism, thereby playing a key role in the long-term global C budget. High erosion rates in mountains have been shown to increase OCpetro oxidation. However, these settings also export unweathered material that may continue to react in downstream floodplains. The relative importance of OCpetro oxidation in mountains versus floodplains remains difficult to assess as disparate methods have been used in the different environments. Here, we investigate the sources and fluxes of rhenium (Re) in the Rio Madre de Dios to quantify OCpetro oxidation from the Andes to the Amazon floodplain using a common approach. Dissolved rhenium concentrations (n = 131) range from 0.01 to 63 pmol L-1 and vary depending on lithology and geomorphic setting. We find that >75% of the dissolved Re derives from OCpetro oxidation and that this proportion increases downstream. We estimate that in the Andes, OCpetro oxidation releases 11.2+4.5/-2.8 tC km-2 y-1 of C2, which corresponds to ~41% of the total OCpetro denudation (sum of oxidized and solid OCpetro). A Re mass balance across the Rio Madre de Dios shows that 46% of OCpetro oxidation takes place in the Andes, 14% in the foreland-lowlands, and 40% in the Andean-fed floodplains. This doubling of OCpetro oxidation flux downstream of the Andes demonstrates that, when present, floodplains can greatly increase OCpetro oxidation and C2 release. [ABSTRACT FROM AUTHOR]

Earthquakes play a fundamental role in the evolution of Earth's topography through co-seismic uplift and subsidence, as well as erosion through widespread landslides induced by ground motion. Earthquake-induced landslides can result in exceptional increases in the transfer of mass from landscapes, supplying sediment to rivers where impacts can last for decades or longer. Landslides can also erode vegetation and soils, in addition to exposing freshly ground rock mass, which can both result in regionally significant carbon transfers. Recent work has sought to quantify the fluxes, rates, and temporal patterns of the impacts on earth surface processes generated by these tectonic events. In this review, we focus on the impacts of earthquake-induced landslides on erosion and sediment flux, river water chemistry, and carbon export through the lens of the well-studied 2008 Wenchuan earthquake. We then discuss these themes in the context of works from the 1999 Taiwan Chi-Chi earthquake, 2015 Nepalese Gorkha earthquake, and New Zealand historical earthquakes, altogether highlighting an important role of earthquake-induced landslides in erosion and weathering along tectonically active mountain ranges. We suggest that more monitoring, geochemical tracing, paleo-records, and/or modelling studies are needed to compare the processes and fluxes of catchment erosion and weathering before and after earthquake events, which will help to deepen our understanding not only of the impacts of earthquake-induced landslides on earth surface processes, but also the linkage among high magnitude events, continental erosion and weathering, and the long-term global carbon cycle. [ABSTRACT FROM AUTHOR]

The article informs that Brantley et al. have studied the temperature dependence of silicate weathering, and its impact on Earth's climate. It mentions that the results showed that silicate weathering increased with temperature, with field rates increasing more than those from laboratory experiments, and highlights the complex interplay between temperature, minerals, and water in determining the rate of silicate weathering and its impact on the carbon cycle and Earth's climate.

Oxidative weathering of sedimentary rocks can release carbon dioxide (CO2) to the atmosphere and is an important natural CO2 emission. Two mechanisms operate -- the oxidation of sedimentary organic matter and the dissolution of carbonate minerals by sulfuric acid. It has proved difficult to directly measure the rates at which CO2 is emitted in response to these weathering processes in the field, with previous work generally using methods which track the dissolved products of these reactions in rivers. Here we design a chamber method to measure CO2 production during the oxidative weathering of shale bedrock, which can be applied in erosive environments where rocks are exposed frequently to the atmosphere. The chamber is drilled directly into the rock face and has a high surface-area-to-volume ratio which benefits measurement of CO2 fluxes. It is a relatively low-cost method and provides a long-lived chamber (several months or more). To partition the measured CO2 fluxes and the source of CO2, we use zeolite molecular sieves to trap CO2 "actively" (over several hours) or "passively" (over a period of months). The approaches produce comparable results, with the trapped CO2 having a radiocarbon activity (fraction modern, Fm) ranging from FmD0.05 to FmD 0.06 and demonstrating relatively little contamination from local atmospheric CO2 (FmD1.01). We use stable carbon isotopes of the trapped CO2 to partition between an organic and inorganic carbon source. The measured fluxes of rockderived organic matter oxidation (171-5 mgCm river chemistry in rivers around the world. The high oxidative weathering fluxes are consistent with the high erosion rate of the study region. We propose that our in situ method has the potential to be more widely deployed to directly measure CO2 fluxes during the oxidative weathering of sedimentary rocks, allowing for the spatial and temporal variability in these fluxes to be determined. [ABSTRACT FROM AUTHOR]

Oxidative weathering of sedimentary rocks can release carbon dioxide (CO2) to the atmosphere and is an important natural CO2 emission. Two mechanisms operate - the oxidation of sedimentary organic matter and the dissolution of carbonate minerals by sulphuric acid. It has proved difficult to directly measure the rates of these weathering processes in the field, with previous work generally using indirect methods which track the dissolved products of these reactions in rivers. Here we design a chamber method to measure CO2 production during the oxidative weathering of shale bedrock, which can be applied in erosive environments where rocks are exposed frequently to the atmosphere. The chamber is drilled directly into the rock face and is a relatively low cost method to provide a long-lived (several months or more), oxygenated environment in contact with a surface area of potential reactant. To partition the measured CO2 fluxes and the source of CO2, we use zeolite molecular sieves to trap CO2 actively (over several hours) or passively (over a period of months). The approaches produce comparable results, with the trapped CO2 having a fraction modern ranging from 0.05 to 0.06 and demonstrating relatively little contamination from local atmospheric CO2 (fraction modern of 1.01). We use stable isotopes of the trapped CO2 to partition between an organic and inorganic carbon source. The measured fluxes of rock-derived organic matter oxidation and carbonate dissolution by sulphuric acid from a single chamber were high, but consistent with the high erosion rate of the study region (of ~ 5 mm yr-1). We propose our in situ method has the potential to be more widely deployed to directly measure CO2 fluxes during the oxidative weathering of sedimentary rocks, allowing for the spatial and temporal variability in these fluxes to be determined. [ABSTRACT FROM AUTHOR]

Weathering of organic carbon contained in sedimentary rocks (petrogenic OC, OC petro) is an important control on the concentrations of carbon dioxide (CO 2) and oxygen in the atmosphere. Of particular significance are steep mountainous catchments, where high rates of physical erosion introduce OC petro to the surface, where oxygen in air and water can help drive oxidative weathering reactions, yet measurements of CO 2 emissions from OC petro oxidation are still scarce. Here, we use in situ gas accumulation chambers and show that CO 2 fluxes, and their environmental controls, can be determined during a stand-alone, short-term (8 days) field campaign, applied to a remote setting. In the rapidly eroding Waiapu River catchment, New Zealand, dominated by mudstones, we measured high rates of CO 2 release (222–1590 mgC m−2 d−1) in five accumulation chambers in the near-surface of naturally fractured and bedded rock outcrops. The corresponding CO 2 concentrations are very high (p CO 2 ~4700–27,100 ppmv), and such values could influence acid-hydrolysis reactions during chemical weathering of co-occurring silicate minerals. The CO 2 is radiocarbon depleted (fraction modern, F 14C = 0.0122–0.0547), confirming it is petrogenic in origin. Stable carbon isotopes suggest a source from OC petro , but δ13C values of the CO 2 are lower by ~3.5–3.7 ± 0.1 ‰ from those of OC petro (−25.9 ± 0.1 ‰), consistent with isotope fractionation associated with microbial respiration of OC petro. Over 6 days of measurement, we find that CO 2 fluxes respond quickly to changes in temperature and humidity, indicating an environmental regulation that is captured by our short-term installation. The approaches applied here mean that future research can now seek to constrain the climatic, lithological and biological controls on OC petro oxidation across regional to global scales. • CO 2 fluxes from oxidative weathering can be measured during short field campaigns. • Their size, regulated by temperature and humidity, reaches that of soil respiration. • Carbon isotopes reveal that measured CO 2 is sourced from petrogenic organic matter. • Microbial respiration is potentially associated with carbon isotope fractionation. • Partial pressures of CO 2 in rock can be high and induce silicate weathering. [ABSTRACT FROM AUTHOR]

Uranium (U) isotope signatures (δ238U) recorded in sedimentary archives provide insight into the paleo redox state of the ocean. But the robust interpretation of these sedimentary U isotope records requires characterisation of the U isotope signature of rivers, the main source of U to the ocean. The main controlling factors on riverine δ238U remain poorly constrained. Here, we investigate the elemental and isotope signatures of uranium in the dissolved and solid loads of a well-characterised river, the Mackenzie Basin (Canada). In the Mackenzie Basin, the solid load δ238U shows a positive relationship with U and vanadium (V) contents, consistent with the suggestion that particulate δ238U are explained by variable contributions via erosion of silicate and black shale. The δ238U of the dissolved and solid loads are correlated which, at first sight, suggests no U isotope fractionation during chemical weathering, and a purely lithological control on both the river dissolved and solid δ238U. Moreover, relationships between dissolved U and δ238U and major elements such as calcium and sulfate, also support the idea of a lithological control. However, the δ238U of end members inferred from mixing relationships are not consistent with binary mixing of two sources, suggesting some potential U isotope fractionation during weathering. In fact, the abundance of U in the river dissolved load is always lower than that predicted by silicate rock weathering. This suggests that 1) the weathering of silicate only can explain the abundance of U in the river dissolved load and 2) secondary weathering processes scavenge a proportion of the U released by primary mineral breakdown. The broad negative relationship between δ238U and the depletion of dissolved U is also consistent with the control of dissolved δ238U by secondary weathering processes following silicate mineral breakdown. The relationships observed between dissolved U, δ238U and the large-scale environmental controls on weathering processes (such as weathering intensity or runoff) support this hypothesis. Overall, our interpretations of the variation in the river dissolved δ238U challenge the common assumption of the control of dissolved U by black shale and carbonate weathering. In addition, we suggest that the extent of secondary weathering processes can imprint on the U isotope signature of rivers, now and in the past. [ABSTRACT FROM AUTHOR]

The erosion of major mountain ranges is thought to be largely cannibalistic, recycling sediments that were deposited in the ocean or on the continents prior to mountain uplift. Despite this recognition, it has not yet been possible to quantify the amount of recycled material that is presently transported by rivers to the ocean. Here, we have analyzed the Li content and isotope composition (δ7Li) of suspended sediments sampled along river depth profiles and bed sands in three of the largest Earth's river systems (Amazon, Mackenzie and Ganga-Brahmaputra rivers). The δ7Li values of river-sediments transported by these rivers range from +5.3 to -3.6‰ and decrease with sediment grain size. We interpret these variations as reflecting a mixture of unweathered rock fragments (preferentially transported at depth in the coarse fraction) and present-day weathering products (preferentially transported at the surface in the finest fraction). Only the finest surface sediments contain the complementary reservoir of Li solubilized by water-rock interactions within the watersheds. Li isotopes also show that river bed sands can be interpreted as a mixture between unweathered fragments of igneous and sedimentary rocks. A mass budget approach, based on Li isotopes, Li/Al and Na/Al ratios, solved by an inverse method allows us to estimate that, for the large rivers analyzed here, the part of solid weathering products formed by present-day weathering reactions and transported to the ocean do not exceed 35%. Li isotopes also show that the sediments transported by the Amazon, Mackenzie and Ganga-Brahmaputra river systems are mostly sourced from sedimentary rocks (>60%) rather than igneous rocks. This study shows that Li isotopes in the river particulate load are a good proxy for quantifying both the erosional rock sources and the fingerprint of present-day weathering processes. Overall, Li isotopes in river sediments confirm the cannibalistic nature of erosion and weathering. [ABSTRACT FROM AUTHOR]