Search

Anisotropic properties of columnar nanoporous thin films were utilized to design and fabricate interference mirrors with lossless omnidirectional reflection in the visible spectral range. Index graded columnar films with distributed Bragg reflector (DBR), sinusoidal, and Gaussian refractive index profiles were studied using finite-difference frequency-domain and finite-difference time-domain methods, with an emphasis on maximizing the omnidirectional reflection bandwidth. Titanium dioxide columnar films with sixteen period sinusoidal refractive index profile were fabricated using the glancing angle deposition technique and characterized by angle resolved transmittance measurements. Simulations and experimental measurements have shown the presence of the omnidirectional reflection band up to 5% wide for a film with a maximum refractive index nmax=2.3 and refractive index contrast Δn=0.8. Simulations further showed that with the optimal choice of the refractive index variation range, the omnidirectional reflection band can reach 10.5% width in TiO2 films with a sinusoidal index profile, 14.5% with a DBR index profile, and 12% with a Gaussian profile. Due to the optical anisotropy of the columnar films, the reflection bandwidth exceeded the corresponding value, observed in isotropic analogs, by a factor of three to four depending on the choice of the refractive index profile. [ABSTRACT FROM AUTHOR]

Columnar thin films exhibiting linear polarization selectivity have been theoretically investigated and fabricated using the glancing angle deposition (GLAD) technique. The film structure employed an s-shaped columnar morphology that may be either smoothly bent or composed of discrete segments. Finite-difference time-domain and frequency-domain methods have been used to model these thin film structures numerically. Simulation results have yielded optimal geometries in which the films exhibit either a single frequency band with polarization-selective transmittance or two separated frequency bands each transmitting one of two orthogonal linearly polarized modes. Based on these designs, a series of TiO2 films were grown by GLAD with continuous and discrete s-shaped columnar morphology. Experimental measurements by spectrophotometry verified the presence of selectivity for the orthogonal linearly polarized modes. Films with more then 24 periods were found to have polarization selectivity approaching unity. The agreement between the simulation and experimental results demonstrates the potential for future theoretical development of highly selective polarization filters based on GLAD thin films. [ABSTRACT FROM AUTHOR]

Oblique-incidence physical vapor deposition has been used to create optical thin films with a polygonal helix-shaped nanostructure. A series of titanium dioxide thin films are investigated, including triangle, square, pentagon, and star-shaped polygonal helices. Experimental optical measurements reveal a double-handed circular Bragg response: at one frequency band a polygonal helix reflects left-handed circularly polarized light, and at a second frequency band reflects right-handed circularly polarized light. The relative wavelength dependence of each reflection band is determined by the physical structure of the polygonal helix, a property that is set during the thin-film deposition process. Spectral-hole polarization filters, produced by adding twist and spacing layer defects to polygonal helix thin films, are also reported. [ABSTRACT FROM AUTHOR]

Abstract: Nb-doped TiO2 (TNO) has been widely explored as an alternative transparent conductor. TNO thin films have been fabricated by various deposition methods, and here we demonstrate fabrication by evaporation of sol–gel synthesized TNO source material. A range of Nb x Ti1− x O2 (x =0, 0.03, 0.06, 0.12, 0.24) compositions were synthesized, pressed into pellets, and deposited as thin films via electron beam evaporation. The thin films were characterized for composition by energy dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy and for crystallinity by X-ray diffraction for the different Nb contents explored. Transparency, conductivity, and Haacke transparent conductor figure of merit values are reported for the evaporated TNO films as a function of Nb content, substrate heating temperature, and post deposition annealing conditions. Glancing angle deposition (GLAD) is used to demonstrate nanostructuring of evaporated TNO based on physical shadowing. Nanostructured GLAD TNO films of increased morphological complexity can be produced using this method, and could lead to unique transparent conductor device architectures. [Copyright &y& Elsevier]

Abstract: A high-speed optical humidity sensor was fabricated from a nanostructured titanium dioxide thin film. A refractive index depth profile designed to yield a narrow-bandpass optical interference filter was obtained through nanoscale porosity variations produced by a physical vapor deposition technique known as glancing angle deposition (GLAD). The GLAD process provides film morphology control on the 10nm scale through a combination of deposition at highly oblique vapor incidence angles and controlled substrate motion. Under varying humidity conditions the transmittance spectrum of the filter shifts due to effective index changes of the porous structure resulting from water vapor adsorption/desorption. Performance analysis has shown that this device is highly sensitive, exhibits minimal hysteresis, and is extremely fast. The adsorption and desorption response times were measured to be 270ms and 160ms, respectively. [Copyright &y& Elsevier]