Search

The shape design of the Tubular Linear Synchronous Motor (TLSM) is a critical engineeri ng optimization problem which was handled as single- and multi-objective optimization frameworks. However, the different practical constraints for the TLSM design must be efficiently guaranteed. This paper proposes a developed multi-objective shape design of the TLSM to maximize the operating force and minimize the flux saturation. In this regard, a Multi-objective Grey Wolf Optimizer (MGWO) is developed, including an outside archive with a predetermined size that is integrated for storing and retrieving Pareto optimal solutions. Using this knowledge, the grey wolf social structure would then be established, and, in the multi-objective searching environments, grey wolf hunting behavior would then be replicated. The superiority and effectiveness of the developed MGWO is assessed in comparison to the Multi-objective Flower Pollination Algorithm (MFPA), Multi-objective Lichtenberg Algorithm (MOLA), and Multi-objective Grasshopper Optimization Algorithm (MGOA). The outcomes illustrate that the developed MGWO provides an average improvement of 73.46%, 19.07%, and 15.15% compared to MFPA, MOLA, and MGOA, respectively. The validation of the developed MGWO is extended for a multi-objective form of welded beam design (WBD) by simultaneously minimizing the deflection and the manufacturing costs. Similar findings are obtained with different reference points, the developed MGWO provides an average improvement of 2.8%, 0.7%, and 3.04% compared to MFPA, MOLA, and MGOA, respectively. [ABSTRACT FROM AUTHOR]

Power generation for renewable energy sources increased rapidly during last few years. Similarly, the high gain dc–dc boost choppers are taking place of conventional power converters used for photovoltaic (PV) appliances. Researchers are developing different methods in order to provide high voltage gain, low ripple, reduced switch stress, low converter costs, and minimized variations of PV operating points. This study proposes a two-stage converter for a freestanding water pumping motor drive power by solar PV system. According to the proposed system, at first, a high gain (HG) cell and a DC-to-DC boost converter are combined to increase the PV voltage to high levels. Later on, the resulting dc voltage feds a three-phase synchronous reluctance motor drive that operates centrifugal pump load. The perturb and observe approach is utilized to get the maximum power out of the solar PV module. Moreover, indirect field-oriented control is implemented to accomplish smooth starting of synchronous reluctance motor. In order to validate the effectiveness of proposed technique, a MATLAB/Simulink environment-based simulation setup along with an experimental prototype is developed. Additionally, various cases are considered based on different operating conditions and irradiance levels to collect and analyse the results. [ABSTRACT FROM AUTHOR]