Search

A low‐profile rectangular dielectric resonator antenna (RDRA) through the slot‐based feed method is studied for the multiband operation. Based on the perfect magnetic wall (PMW) model and dielectric waveguide model (DWM), field distributions and resonant frequencies of the RDRA intrinsic modes are calculated for multimodal analysis. The microstrip backed slot coupling scheme is employed for the simultaneous excitation of multiple modes. A prototype is fabricated and validated. By generating 10 modes simultaneously including TEy111 to TEy711, and TEx221 to TEx421 modes. The RDRA is able to provide good multiband performance. [ABSTRACT FROM AUTHOR]

This article presents a dual-band closed-slot multiple-input multiple-output (MIMO) antenna for terminal wireless applications. By simply inserting additional slots between the closely spaced parallel-arranged radiation slots, the signal impedances of common mode (CM) and differential mode (DM) can achieve similar status, and the strong mutual coupling effect is then eliminated. The proposed slot antenna pair shows good isolation of better than 20 dB across the desired Wi-Fi bands. In addition to the one-wavelength slot antenna, flexible extension to a more compact half-wavelength slot pair is given for future industrial design (ID), which provides further validation of the method. We fabricate the $4\times4$ MIMO antenna system constituted by two sets of one-wavelength closed-slot pairs. The experimental results show that the proposed MIMO antenna can offer isolation of better than 18 dB, an envelope correlation coefficient (ECC) of lower than 0.1 between all ports, and a wide −3 dB efficiency bandwidths across the desired bands. The results confirm that the proposed antenna is a viable candidate for Wi-Fi communications inside routers. [ABSTRACT FROM AUTHOR]

To meet the demands of the new frequency bands and the $4\times 4$ multiple-input multiple-output (MIMO) specification brought by fifth generation (5G), a triple-band microstrip patch antenna and its four-antenna module are proposed. Based on the half-mode microstrip patch, the first three modes of TM1/2,0, TM1/2,1, and TM3/2,0 that can be independently tuned are engineered to cover the three Chinese 5G bands (N41/N78/N79). The proposed triple-band microstrip patch antenna with the volume of $33.5\times 32.5\times 4$ mm3 shows the −6 dB frequency bands of 2.47–2.75 GHz, 3.39–3.60 GHz, and 4.69–5.10 GHz, which makes a nice compromise between antenna volume and impedance bandwidths. Four such patches are arranged in a sequentially rotated style to constitute the triple-band four-antenna module, which is with the volume of $71\times 71\times 4$ mm3. Measured results of the module show high performance. The reflection coefficients of the four elements are almost identical: the bandwidths are 2.50–2.75 GHz, 3.41–3.62 GHz, and 4.68–5.01 GHz; all the isolations are better than −13.3 dB; the average total efficiencies of the four elements are between −1.41 and −1.11 dB, −2.45 and −2.10 dB, and −1.81 and −1.53 dB for N41, N78, and N79, respectively; and all the envelope correlation coefficients (ECCs) are lower than 0.07. [ABSTRACT FROM AUTHOR]

The huge proliferation of the antenna number brought by 5G greatly increases the pressure of the bezels of the 5G terminals. To release the pressure, planar four-antenna module with miniaturization and wideband performance that can be implemented on the back cover is proposed in this article. Four identical dual-mode PIFAs are arranged in a sequentially rotated style and the whole antenna appears in a circular shape. Each antenna element is a slotted quasi-quarter circle with one inner edge shorted and the other two edges left open, and it is coupled fed by an L-shaped microstrip line. A cross line that connects all the four elements together is used to improve the isolation of the neighboring elements. The four-antenna module covering N77 is with the diameter of 30.6 mm and height of 2 mm. The measured results show that for all the four antenna elements, the −6 dB impedance bandwidths cover 3.3–4.2 GHz, all the isolations are better than 9.7 dB, the average total efficiencies are between 36% and 40%, and envelope correlation coefficients (ECCs) are lower than 0.5. To the best of the authors’ knowledge, this is the smallest four-antenna module covering 3.3–4.2 GHz. [ABSTRACT FROM AUTHOR]

This article proposes a novel design of the dual-band antenna pair. Starting from the single-band antenna pair composed of T-shaped monopole and T-shaped slot that are intersected with each other, orthogonal T-monopole and odd-symmetrical slot modes are excited. By adding symmetrical low-pass high-stop filters into the horizontal stub of the T-monopole and high-pass low-stop filters into the gap of the T-slot, an extra mode is introduced for each antenna, producing dual-band operation. Impedance bandwidths and radiation efficiencies of both bands can be adjusted flexibly using the filters. A detailed design guideline is given. The dual-band antenna pair operating at partial N78 (p-N78, 3.4~3.6 GHz) and partial N79 (p-N79, 4.8~4.9 GHz) is with a footprint of $15\times 6$ mm2. The measured results show that the average efficiencies are both −3.4 dB at p-N78/p-N79 for the odd-symmetrical slot and −2.8 dB/−3.7 dB at p-N78/p-N79 for the T-monopole, isolations are better than −16.8 dB at p-N78 and −11.8 dB at p-N79, and ECCs are lower than 0.1 at p-N78 and 0.2 at p-N79. The proposed dual-band antenna pair exhibits great potential to be applied in the fifth-generation (5G) multiple-input multiple-output (MIMO) terminal. [ABSTRACT FROM AUTHOR]

The mechanism for the radiation efficiency local minimum in antennas, especially for open-slot antennas and T-shaped antennas, has been investigated. It is found that the local minimum in those antennas always corresponds to an ideal differential mode. Furthermore, the frequency position of the ideal differential mode is decided by the parasitic parts of the antennas. Simple methods for estimating the local minimum position are proposed based on the mechanism we have found. In addition, the duality relation between those two types of antennas is also discussed. Our findings provide a guideline for designing mobile phone antennas with improved efficiency. [ABSTRACT FROM AUTHOR]

This paper proposes a polarization-orthogonal co-frequency dual antenna pair suitable for fifth-generation (5G) multiple-input multiple-output (MIMO) smartphone with metallic bezels. The proposed spatial-reuse dual antenna pair consists of a split on the metallic bezel and a slot on the mainboard ground, where the slot is centered on the split. Two orthogonal degenerate characteristic modes operating at half wavelength including in-phase current and slot modes can be excited on the same antenna structure. An end-shorted microstrip line that crosses the split is used to excite the in-phase current mode, producing $y$ -polarized radiation, while a symmetrical slot-centered Y-shaped feeding network with its shorted ends crossing the slot is adopted to excite the slot mode, producing $x$ -polarized radiation. To the best of authors’ knowledge, this is the first time that a co-frequency dual antenna pair suitable for smartphone with metallic bezels is proposed. A sub-6 GHz dual antenna pair operating at 3.5 GHz that occupies a footprint of $25 \times 7 \times 1.5$ mm3 shows a simulated isolation better than −24.1 dB without any external decoupling measures and an envelope correlation coefficient (ECC) lower than 0.008. A four-antenna MIMO array is fabricated and measured to verify the feasibility. Across the operation band, the measured isolation of the antenna pair is better than −20.1 dB and other isolation levels are all better than −12.7 dB, the ECCs of any two antennas are lower than 0.13, and the total efficiency range of the four antennas is 35.2%~64.7%. The proposed dual antenna pair exhibits a great potential to be applied in future 5G MIMO smartphone. [ABSTRACT FROM AUTHOR]

In this paper, a novel reconfigurable open slot antenna has been proposed for LTE smartphone applications to cover a wide bandwidth of 698–960 and 1710–2690 MHz. The antenna is located at the bottom portion of the mobile phone and is integrated with metal rim, thereby occupying a small space and providing mechanical stability to the mobile phone. Varactor diode is used to cover the lower band frequencies, so as to achieve a good frequency coverage and antenna miniaturization. The operational principles of the antenna are studied and the final design is optimized, fabricated, and tested. It has achieved the desired impedance bandwidth and the total efficiency of minimum 50% in free space throughout the required bands. The antenna performance with mobile phone components and human hand is also been studied. Furthermore, the SAR in a human head is investigated and is found to be within allowable SAR limits. Finally a multiple-input multiple-output antenna configuration with high isolation is proposed; it has an identical reconfigurable open slot antenna integrated at the top edge of the mobile phone acting as the secondary antenna for 698–960 and 1710–2690 MHz. Thus the proposed antenna is an excellent candidate for LTE smartphones and mobile devices. [ABSTRACT FROM AUTHOR]