Search

This study describes an actual problem with circulating current at the ground grid of an actual power system that has an air-core reactor. Such reactors generate a large amount of magnetic flux whose path can be closed through its underneath ground grid. This magnetic flux induces a voltage on the ground meshes and thus results in considerable circulating currents that pass through the ground meshes. Indeed, the main novelty of this study is investigating the effect of air-core reactors on the other nearby equipment and considering the air-core reactor's flux underneath ground meshes. This phenomenon occurred in a steel industrial plant and practically leads to severe damages to equipment through which the current has been flowing, including ground grid conductors, cable shields, and foundation armatures. This study addresses the origins of problems raised by the manufactured equipment in a reputable company based on both simulations and experimental studies. Based on the obtained results, several practical approaches are proposed and implemented to overcome the problems mentioned above. [ABSTRACT FROM AUTHOR]

This study introduces a predictive auto‐reclosure scheme based on faster‐than‐real‐time (FTRT) analysis for synchronous generator type of distributed generation (DG) units to decrease DG oscillations after successful reclosure and also enhance transient stability margin of the unit after unsuccessful reclosure. The FTRT analysis, as a new concept for the protective relaying, represents a powerful predictive auto‐reclosure scheme which is based on a state‐space model of the DG unit. After a fault scenario and the first operation of the associated breaker, the FTRT analysis predicts energy level of the DG unit and determines an optimum dead‐time corresponding to the minimum energy level of the DG unit for reclosure that can provide an appropriate margin for transient stability. The effectiveness and accuracy of the proposed method are verified based on a test system. The results confirm that the proposed approach can effectively enhance transient stability for unsuccessful reclosure and reduce the corresponding oscillations after reclosure. [ABSTRACT FROM AUTHOR]

Load dynamics play an important role in the voltage stability. Grid‐side short‐circuit faults may induce severe voltage drops at motor load buses. Once the fault is cleared, depending upon its clearing time, the load bus voltage may either return to its permissible range or degrade gradually until it collapses. From the short‐term voltage stability viewpoint, the former is a stable phenomenon, while the latter is an unstable circumstance and the load should be shed in order to prevent voltage instability from being spread over the grid. To cope with this problem, this study presents a new under‐impedance load shedding (UILS) scheme. A quadratic distance relay is used as the load shedding element. The trajectory of load impedance is monitored by the proposed UILS relay. Following the grid‐side fault clearance, if the impedance trajectory enters the load shedding zone and remains inside it for a predefined time, voltage instability is detected and the load is curtailed by the UILS relay. The proposed approach is tested on various networks, including a real power system model. The obtained results approve the efficiency of the proposed UILS scheme. [ABSTRACT FROM AUTHOR]