Search

In fish, the circadian clock represents a key regulator of many aspects of biology and is controlled by combinations of abiotic and biotic factors. These environmental factors are frequently manipulated in fish farms as part of strategies designed to maximize productivity. The flatfish turbot, Scophthalmus maximus, represents one of the most important species within the aquaculture sector in Asia and Europe. Despite the strategic importance of this species, the function and regulation of the turbot circadian system remains poorly understood. Here, we have characterized the core circadian clock genes, clock1, per1, per2 and cry1 in turbot and have studied their daily expression in various tissues under a range of lighting conditions and feeding regimes. We have also explored the influence of light and feeding time on locomotor activity. Rhythmic expression of the four core clock genes was observed in all tissues studied under light dark (LD) cycle conditions. Rhythmicity of clock gene expression persisted upon transfer to artificial free running, constant conditions confirming their endogenous circadian clock control. Furthermore, turbot showed daily cycles of locomotor activity and food anticipatory activity (FAA) under LD and scheduled-feeding, with the activity phase as well as FAA coinciding with and being dependent upon exposure to light. Thus, while FAA was absent under constant dark (DD) conditions, it was still detected in constant light (LL). In contrast, general locomotor activity was arrhythmic in both constant darkness and constant light, pointing to a major contribution of light, in concert with the circadian clock, in timing locomotor activity in this species. Our data represents an important contribution to our understanding of the circadian timing system in the turbot and thereby the optimization of rearing protocols and the improvement of the well-being of turbot within fish farming environments. [ABSTRACT FROM AUTHOR]

Ceterach officinarum Willd is a plant widespread throughout Europe and used in southern Italy as a diuretic. Beliefs in the benefits of C. officinarum aqueous extract in the treatment of calcium oxalate kidney stones are widely held. Little is known, however, about the actual mechanism of its antilithiatic action. Our results in this in vitro study corroborate C. officinarum aqueous extract as a good source of antioxidants with a high antioxidant effects. Our results also demonstrate a major impact of C. officinarum aqueous extract on in vitro induced calcium oxalate crystallization kinetics and crystal morphology, showing its critical role in kidney stone formation and/or elimination. We show that progressively increasing doses of C. officinarum aqueous extract cause a sequence of effects. A powerful inhibitory action on calcium oxalate monohydrate (COM) growth and aggregation is first observed. C. officinarum aqueous extract also appears highly effective in stimulating nucleation increasing the number and reducing the size of COM crystals, which become progressively thinner, rounded and concave in a dose-dependent manner. These shape-modified COM crystals are known to be less adherent to renal tubular cells and more easily excreted through the urinary tract preventing kidney stone formation. Further, C. officinarum aqueous extract promotes the formation of calcium oxalate dihydrate (COD) rather than the monohydrate so that, at the highest concentrations used, only COD crystals are observed, in significant greater numbers with a clear reduction in their size, in a dose-dependent manner. Furthermore, AFM analyses allowed us to reveal the presence of C. officinarum component(s) on the surfaces of COD and modified COM crystals. The crystal surface adsorbed component(s) are shown to be similarly active as the total aqueous extract, suggesting a trigger factor which may direct crystal modification towards COD forms. In urolithiasis pathogenesis COD crystals are less dangerous than the COM forms due to their lower affinity for renal tubular cells. Our results are important in understanding the mechanisms which guide the modification induced by C. officinarum on the crystallization process. Based on these data, together with no adverse toxic effect being observed on the in vitro model of human intestinal enterocytes, C. officinarum aqueous extract could represent an attractive natural therapy for the treatment of urolithiasis. [ABSTRACT FROM AUTHOR]

Biophysical and biochemical data on hyaluronan (HA)-based dermal fillers strongly support their optimal use and design to meet specific requisites. Here, four commercially available (in Europe) HA “volumetric” fillers, among the most used in the clinical practice, have been characterized in vitro. Analyses revealed the highest amounts of water-soluble HA reported so far and provided hydrodynamic data for these soluble polymeric fractions. Volumetric gels exhibit a wide range of rigidity with most of them showing G’ values around 200-300Pa. They greatly differ in cohesivity. 1mL of gel hydrates up to 2.4–3.2mL. The products completely solubilize due to Bovine Testicular Hyaluronidase (BTH)’s action, thus predicting in vivo complete resorption. For the first time, filler degradation due to reactive oxygen species (ROS) was studied by rheological measurements and a rank in stability was established. Studies using Human Dermal Fibroblasts (HDF) indicated a positive biological response to the HA networks. Further, gel capacity to prompt collagen I, elastin and aquaporin3 synthesis was demonstrated, thus suggesting a positive effect on skin elasticity and hydration, besides the physical volumetric action. The findings are the first wide assessment of features for the volumetric class of HA-fillers and include first data on their resistance to degradation by ROS and biological effects on HDF. The study represents a valuable contribution to the understanding of HA-fillers, useful to optimize their use and manufacture. [ABSTRACT FROM AUTHOR]

Background: Extensive studies have been carried out over the years to determine the maximum acceptable weight that a worker is capable of lifting in a given situation among Occidental populations across Europe and US. Nonetheless, studies that place emphasis on using lifting frequency as the quantifying task parameter, especially in developing countries such as Malaysia, appear to be in scarcity. Hence, this study determined the maximum acceptable frequency of lift (MAFL) for combined manual material handling (MMH) tasks amongst Malaysian males. Method: Two lifting loads were considered in this study: 1 kg and 5 kg. Each subject adjusted his frequency of lifting using a psychophysical approach. The subjects were instructed to perform combined MMH task as fast as they could over a period of 45 minutes without exhausting themselves or becoming overheated. The physiological response energy expenditure was recorded during the experimental sessions. The ratings of perceived exertion (RPE) for four body parts (forearms, upper arm, lower back and entire body) were recorded after the subjects had completed the instructed task. Results: The mean frequencies of the MMH task had been 6.8 and 5.5 cycles/minute for lifting load of 1 and 5 kg, respectively, while the mean energy expenditure values were 4.16 and 5.62 kcal/min for 1 and 5 kg load, respectively. These displayed a significant difference in the Maximum Acceptable Frequency of Lift (MAFL) between the two loads, energy expenditure and RPE (p < 0.05) whereby the subjects appeared to work harder physiologically for heavier load. Conclusion: It can be concluded that it is significant to assess physiological response and RPE in determining the maximum acceptable lifting frequency at varied levels of load weight. The findings retrieved in this study can aid in designing tasks that do not exceed the capacity of workers in order to minimise the risk of WRMSDs. [ABSTRACT FROM AUTHOR]

Background: Image-based blood flow simulations have been increasingly applied to investigate intracranial aneurysm (IA) hemodynamics. However, the acceptance among physicians remains limited due to the high variability in the underlying assumptions and quality of results. Methods: To evaluate the vessel segmentation as one of the most important sources of error, the international Multiple Aneurysms AnaTomy CHallenge 2018 (MATCH) was announced. 26 research groups from 13 different countries segmented three datasets, which contained five IAs in total. Based on these segmentations, 73 time-dependent blood flow simulations under consistent conditions were carried out. Afterwards, relevant flow and shear parameters (e.g., neck inflow rate, parent vessel flow rate, spatial mean velocity, and wall shear stress) were analyzed both qualitatively and quantitatively. Results: Regarding the entire vasculature, the variability of the segmented vessel radius is 0.13 mm, consistent and independent of the local vessel radius. However, the centerline velocity shows increased variability in more distal vessels. Focusing on the aneurysms, clear differences in morphological and hemodynamic parameters were observed. The quantification of the segmentation-induced variability showed approximately a 14% difference among the groups for the parent vessel flow rate. Regarding the mean aneurysmal velocity and the neck inflow rate, a variation of 30% and 46% was observed, respectively. Finally, time-averaged wall shear stresses varied between 28% and 51%, depending on the aneurysm in question. Conclusions: MATCH reveals the effect of state-of-the-art segmentation algorithms on subsequent hemodynamic simulations for IA research. The observed variations may lead to an inappropriate interpretation of the simulation results and thus, can lead to inappropriate conclusions by physicians. Therefore, accurate segmentation of the region of interest is necessary to obtain reliable and clinically helpful flow information. [ABSTRACT FROM AUTHOR]

Most of the Paleolithic art and ornaments discovered in Romania come from the site of Poiana Cireșului. Four Paleolithic layers have been studied at this site—the oldest one belongs to the Early Gravettian period between 30 ka and 31 ka BP. The ornaments discovered in this layer include perforated shells from three species of mollusks: freshwater Lithoglyphus naticoide and Lithoglyphus apertus as well as Homalopoma sanguineum (an exclusively Mediterranean species). Poiana Cireșului is one of the very few Gravettian sites where perforated Homalopoma sanguineum shells were found, and the importance of this discovery is stressed even more by the very long distance between the site and the nearest source located over 900 km away. This find suggests the connection of communities here with the Mediterranean area as well as a possible movement of populations from the south of the continent to the east of the Carpathians with significant implications in understanding human group mobility and the origin of the Early Gravettian in this area. Furthermore, Poiana Cireșului is the only Gravettian settlement where Lithoglyphus naticoides shells were used. The unique association of perforated shells—not found in any other Gravettian settlement—contributes to the identity of the Paleolithic community of Poiana Cireșului through their ornaments. [ABSTRACT FROM AUTHOR]

The radiological consequences of a nuclear power plant (NPP) accident, resulting in the release of radionuclides to the environment, will depend largely on the mitigating actions instigated shortly after the accident. It is therefore important to make predictions of the radiation dose to the affected population, from external as well as internal exposure, soon after an accident, despite the fact that data are scarce. The aim of this study was to develop a model for the prediction of the cumulative effective dose up to 84 years of age based on the ground deposition of 137Cs that is determined soon after fallout. The model accounts for different assumptions regarding external and internal dose contributions, and the model parameters in this study were chosen to reflect various mitigating actions. Furthermore, the relative importance of these parameters was determined by sensitivity analysis. To the best of our knowledge, this model is unique as it allows quantification of both the external and the internal effective dose using only a fallout map of 137Cs after a nuclear power plant accident. The cumulative effective dose over a period of 50 years following the accident per unit 137Cs deposited was found to range from 0.14 mSv/kBq m-2 to 1.5 mSv/kBq m-2, depending on the mitigating actions undertaken. According to the sensitivity analysis, the most important parameters governing the cumulative effective dose to various adult populations during 50 years after the fallout appear to be: the correlation factor between the local areal deposition of 137Cs and the maximum initial ambient dose rate; the maximum transfer from regional average fallout on the ground to body burden; the local areal deposition of 137Cs; and the regional average 137Cs deposition. Therefore, it is important that mapping of local 137Cs deposition is carried out immediately after fallout from a nuclear power plant accident, followed by calculations of radiation doses for different scenarios using well-known parameters, in order to identify the most efficient mitigation strategies. Given this 137Cs mapping, we believe our model is a valuable tool for long-term radiological assessment in the early phase after NPP accidents. [ABSTRACT FROM AUTHOR]

Conventional generators in power grids are steadily substituted with new renewable sources of electric power. The latter are connected to the grid via inverters and as such have little, if any rotational inertia. The resulting reduction of total inertia raises important issues of power grid stability, especially over short-time scales. With the motivation in mind to investigate how inertia reduction influences the transient dynamics following a fault in a large-scale electric power grid, we have constructed a model of the high voltage synchronous grid of continental Europe. To assess grid stability and resilience against disturbance, we numerically investigate frequency deviations as well as rates of change of frequency (RoCoF) following abrupt power losses. The magnitude of RoCoF's and frequency deviations strongly depend on the fault location, and we find the largest effects for faults located on the support of the slowest mode—the Fiedler mode—of the network Laplacian matrix. This mode essentially vanishes over Belgium, Eastern France, Western Germany, northern Italy and Switzerland. Buses inside these regions are only weakly affected by faults occuring outside. Conversely, faults inside these regions have only a local effect and disturb only weakly outside buses. Following this observation, we reduce rotational inertia through three different procedures by either (i) reducing inertia on the Fiedler mode, (ii) reducing inertia homogeneously and (iii) reducing inertia outside the Fiedler mode. We find that procedure (iii) has little effect on disturbance propagation, while procedure (i) leads to the strongest increase of RoCoF and frequency deviations. This shows that, beyond absorbing frequency disturbances following nearby faults, inertia also mitigates frequency disturbances from distant power losses, provided both the fault and the inertia are located on the support of the slowest modes of the grid Laplacian. These results for our model of the European transmission grid are corroborated by numerical investigations on the ERCOT transmission grid. [ABSTRACT FROM AUTHOR]

Objectives: This study aimed to analyze the daily heart rate variability (HRV) in well-trained female cyclists during the 2017 Tour de France circuit and to relate it to the load and perceived exertion response. Methods: Ten female cyclists volunteered to participate in the study. HRV was recorded with a portable heart rate monitor each morning at rest in supine (7 min.) and upright (7 min.) positions, as well as throughout each day’s stage. Pre-Tour baseline HRV recordings were made, as well as during the four weeks following completion of the Tour. Exercise daily load was assessed using the training impulse score (TRIMPS). Post-exercise rate of perceived exertion (RPE) was assessed daily using the Borg CR-10 scale. Results: The results show a HRV imbalance, increase of sympathetic and decrease of vagal activities respectively, along the event that correlated with rate of perceived exertion (r = 0.46), training impulse score (r = 0.60), and kilometers (r = 046). The greatest change in HRV balance was observed the days after the greatest relative physical load. Mean heart rate and heart rate variability values returned to their baseline values one week after completion of the event. Conclusions: Despite incomplete recovery from day-to-day, fatigue is not summative or augmented with each successive stage and its physical load. Just one week is sufficient to restore baseline values. Heart rate and HRV can be used as a tool to strategically plan the effort of female cyclists that participate in multi-stage events. [ABSTRACT FROM AUTHOR]

Many countries have some kind of energy-system transformation either planned or ongoing for various reasons, such as to curb carbon emissions or to compensate for the phasing out of nuclear energy. One important component of these transformations is the overall reduction in energy demand. It is generally acknowledged that the domestic sector represents a large share of total energy consumption in many countries. Increased energy efficiency is one factor that reduces energy demand, but behavioral approaches (known as “sufficiency”) and their respective interventions also play important roles. In this paper, we address citizens’ heterogeneity regarding both their current behaviors and their willingness to realize their sufficiency potentials—that is, to reduce their energy consumption through behavioral change. We collaborated with three Swiss cities for this study. A survey conducted in the three cities yielded thematic sets of energy-consumption behavior that various groups of participants rated differently. Using this data, we identified four groups of participants with different patterns of both current behaviors and sufficiency potentials. The paper discusses intervention types and addresses citizens’ heterogeneity and behaviors from a city-based perspective. [ABSTRACT FROM AUTHOR]

European beech forests growing on marginal calcareous soils have been proposed to be vulnerable to decreased soil water availability. This could result in a large-scale loss of ecological services and economical value in a changing climate. In order to evaluate the potential consequences of this drought-sensitivity, we investigated potential species range shifts for European beech forests on calcareous soil in the 21st century by statistical species range distribution modelling for present day and projected future climate conditions. We found a dramatic decline by 78% until 2080. Still the physiological or biogeochemical mechanisms underlying the drought sensitivity of European beech are largely unknown. Drought sensitivity of beech is commonly attributed to plant physiological constraints. Furthermore, it has also been proposed that reduced soil water availability could promote nitrogen (N) limitation of European beech due to impaired microbial N cycling in soil, but this hypothesis has not yet been tested. Hence we investigated the influence of simulated climate change (increased temperatures, reduced soil water availability) on soil gross microbial N turnover and plant N uptake in the beech-soil interface of a typical mountainous beech forest stocking on calcareous soil in SW Germany. For this purpose, triple 15N isotope labelling of intact beech seedling-soil-microbe systems was combined with a space-for-time climate change experiment. We found that nitrate was the dominant N source for beech natural regeneration. Reduced soil water content caused a persistent decline of ammonia oxidizing bacteria and therefore, a massive attenuation of gross nitrification rates and nitrate availability in the soil. Consequently, nitrate and total N uptake of beech seedlings were strongly reduced so that impaired growth of beech seedlings was observed already after one year of exposure to simulated climatic change. We conclude that the N cycle in this ecosystem and here specifically nitrification is vulnerable to reduced water availability, which can directly lead to nutritional limitations of beech seedlings. This tight link between reduced water availability, drought stress for nitrifiers, decreased gross nitrification rates and nitrate availability and finally nitrate uptake by beech seedlings could represent the Achilles’ heel for beech under climate change stresses. [ABSTRACT FROM AUTHOR]

The global trends for the rapid growth of distributed solar heat and power in the last decade will likely continue as the levelized cost of production for these technologies continues to decline. To be able to compare the economic potential of solar technologies one must first quantify the types and amount of solar resource that each technology can utilize; second, estimate the technological performance potential based on that resource; and third, compare the costs of each technology across regions. In this analysis, we have performed the first two steps in this process. We use physical and empirically validated models of a total of 8 representative solar system types: non-tracking photovoltaics, 2d-tracking photovoltaics, high concentration photovoltaics, flat-plate thermal, evacuated tube thermal, concentrating trough thermal, concentrating solar combined heat and power, and hybrid concentrating photovoltaic/thermal. These models are integrated into a simulation that uses typical meteorological year weather data to create a yearly time series of heat and electricity production for each system over 12,846 locations in Europe and 1,020 locations in the United States. Through this simulation, systems composed of various permutations of collector-types and technologies can be compared geospatially and temporally in terms of their typical production in each location. For example, we see that silicon solar cells show a significant advantage in yearly electricity production over thin-film cells in the colder climatic regions, but that advantage is lessened in regions that have high average irradiance. In general, the results lead to the conclusion that comparing solar technologies across technology classes simply on cost per peak watt, as is usually done, misses these often significant regional differences in annual performance. These results have implications for both solar power development and energy systems modeling of future pathways of the electricity system. [ABSTRACT FROM AUTHOR]